Version of easy-connect with the u-blox cellular platforms C027 and C030 added.
easy-connect.h
- Committer:
- group-ublox
- Date:
- 2017-08-10
- Revision:
- 0:19aa55d66228
- Child:
- 3:1ee51369146a
File content as of revision 0:19aa55d66228:
#ifndef __EASY_CONNECT_H__ #define __EASY_CONNECT_H__ #include "mbed.h" #define ETHERNET 1 #define WIFI_ESP8266 2 #define MESH_LOWPAN_ND 3 #define MESH_THREAD 4 #define WIFI_ODIN 5 #define WIFI_REALTEK 6 #define CELLULAR_C030 7 #if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266 #include "ESP8266Interface.h" #ifdef MBED_CONF_APP_ESP8266_DEBUG ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX, MBED_CONF_APP_ESP8266_DEBUG); #else ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX); #endif #elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ODIN #include "OdinWiFiInterface.h" OdinWiFiInterface wifi; #elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_RTW #include "RTWInterface.h" RTWInterface wifi; #elif MBED_CONF_APP_NETWORK_INTERFACE == CELLULAR_UBLOX // Note: we use UbloxAtCellularInterfaceExt here but the same // example works with UbloxATCellularInterface or with UbloxPPPCellularInterface // simply uncomment/comment the correct options in the next few lines #include "UbloxATCellularInterfaceExt.h" //#include "UbloxPPPCellularInterface.h" //#include "UbloxATCellularInterface.h" UbloxATCellularInterfaceExt cellular; //UbloxPPPCellularInterface cellular; //UbloxATCellularInterface cellular; #elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET #include "EthernetInterface.h" EthernetInterface eth; #elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_LOWPAN_ND #define MESH #include "NanostackInterface.h" LoWPANNDInterface mesh; #elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_THREAD #define MESH #include "NanostackInterface.h" ThreadInterface mesh; #else #error "No connectivity method chosen. Please add 'config.network-interfaces.value' to your mbed_app.json (see README.md for more information)." #endif #if defined(MESH) #if MBED_CONF_APP_MESH_RADIO_TYPE == ATMEL #include "NanostackRfPhyAtmel.h" NanostackRfPhyAtmel rf_phy(ATMEL_SPI_MOSI, ATMEL_SPI_MISO, ATMEL_SPI_SCLK, ATMEL_SPI_CS, ATMEL_SPI_RST, ATMEL_SPI_SLP, ATMEL_SPI_IRQ, ATMEL_I2C_SDA, ATMEL_I2C_SCL); #elif MBED_CONF_APP_MESH_RADIO_TYPE == MCR20 #include "NanostackRfPhyMcr20a.h" NanostackRfPhyMcr20a rf_phy(MCR20A_SPI_MOSI, MCR20A_SPI_MISO, MCR20A_SPI_SCLK, MCR20A_SPI_CS, MCR20A_SPI_RST, MCR20A_SPI_IRQ); #elif MBED_CONF_APP_MESH_RADIO_TYPE == SPIRIT1 #include "NanostackRfPhySpirit1.h" NanostackRfPhySpirit1 rf_phy(SPIRIT1_SPI_MOSI, SPIRIT1_SPI_MISO, SPIRIT1_SPI_SCLK, SPIRIT1_DEV_IRQ, SPIRIT1_DEV_CS, SPIRIT1_DEV_SDN, SPIRIT1_BRD_LED); #elif MBED_CONF_APP_MESH_RADIO_TYPE == EFR32 #include "NanostackRfPhyEfr32.h" NanostackRfPhyEfr32 rf_phy; #endif //MBED_CONF_APP_RADIO_TYPE #endif //MESH #ifndef MESH // This is address to mbed Device Connector #define MBED_SERVER_ADDRESS "coap://api.connector.mbed.com:5684" #else // This is address to mbed Device Connector #define MBED_SERVER_ADDRESS "coaps://[2607:f0d0:2601:52::20]:5684" #endif #ifdef MBED_CONF_APP_ESP8266_SSID #define MBED_CONF_APP_WIFI_SSID MBED_CONF_APP_ESP8266_SSID #endif #ifdef MBED_CONF_APP_ESP8266_PASSWORD #define MBED_CONF_APP_WIFI_PASSWORD MBED_CONF_APP_ESP8266_PASSWORD #endif /* \brief print_MAC - print_MAC - helper function to print out MAC address * in: network_interface - pointer to network i/f * bool log-messages print out logs or not * MAC address is print, if it can be acquired & log_messages is true. * */ void print_MAC(NetworkInterface* network_interface, bool log_messages) { const char *mac_addr = network_interface->get_mac_address(); if (mac_addr == NULL) { if (log_messages) { printf("[EasyConnect] ERROR - No MAC address\n"); } return; } if (log_messages) { printf("[EasyConnect] MAC address %s\n", mac_addr); } } /* \brief easy_connect - easy_connect function to connect the pre-defined network bearer, * config done via mbed_app.json (see README.md for details). * IN: bool log_messages print out diagnostics or not. * */ NetworkInterface* easy_connect(bool log_messages = false) { NetworkInterface* network_interface = 0; int connect_success = -1; /// This should be removed once mbedOS supports proper dual-stack #if defined (MESH) || (MBED_CONF_LWIP_IPV6_ENABLED==true) printf("[EasyConnect] IPv6 mode\n"); #else printf("[EasyConnect] IPv4 mode\n"); #endif #if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266 if (log_messages) { printf("[EasyConnect] Using WiFi (ESP8266) \n"); printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID); } network_interface = &wifi; connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2); #elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ODIN if (log_messages) { printf("[EasyConnect] Using WiFi (ODIN) \n"); printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID); } network_interface = &wifi; connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2); #elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_RTW if (log_messages) { printf("[EasyConnect] Using WiFi (RTW)\n"); printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID); } network_interface = &wifi; connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2); #elif MBED_CONF_APP_NETWORK_INTERFACE == CELLULAR_UBLOX if (log_messages) { printf("[EasyConnect] Using Cellular (u-blox) \n"); #if MBED_CONF_APP_APN printf("[EasyConnect] Connecting to Cellular %s\n", MBED_CONF_APP_APN); #else printf("[EasyConnect] Connecting to Cellular\n"); #endif } network_interface = &cellular; connect_success = cellular.connect(MBED_CONF_APP_DEFAULT_PIN, MBED_CONF_APP_APN, MBED_CONF_APP_USERNAME, MBED_CONF_APP_PASSWORD); #elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET if (log_messages) { printf("[EasyConnect] Using Ethernet\n"); } network_interface = ð connect_success = eth.connect(); #endif #ifdef MESH if (log_messages) { printf("[EasyConnect] Using Mesh\n"); printf("[EasyConnect] Connecting to Mesh..\n"); } network_interface = &mesh; mesh.initialize(&rf_phy); connect_success = mesh.connect(); #endif if(connect_success == 0) { if (log_messages) { printf("[EasyConnect] Connected to Network successfully\n"); print_MAC(network_interface, log_messages); } } else { if (log_messages) { print_MAC(network_interface, log_messages); printf("[EasyConnect] Connection to Network Failed %d!\n", connect_success); } return NULL; } const char *ip_addr = network_interface->get_ip_address(); if (ip_addr == NULL) { if (log_messages) { printf("[EasyConnect] ERROR - No IP address\n"); } return NULL; } if (log_messages) { printf("[EasyConnect] IP address %s\n", ip_addr); } return network_interface; } #endif // __EASY_CONNECT_H__