Diff: easy-connect.h

Revision:

0:19aa55d66228

Child:

3:1ee51369146a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect.h	Thu Aug 10 14:33:05 2017 +0000
@@ -0,0 +1,200 @@
+#ifndef __EASY_CONNECT_H__
+#define __EASY_CONNECT_H__
+
+#include "mbed.h"
+
+#define ETHERNET        1
+#define WIFI_ESP8266    2
+#define MESH_LOWPAN_ND  3
+#define MESH_THREAD     4
+#define WIFI_ODIN       5
+#define WIFI_REALTEK    6
+#define CELLULAR_C030   7
+
+#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266
+#include "ESP8266Interface.h"
+
+#ifdef MBED_CONF_APP_ESP8266_DEBUG
+ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX, MBED_CONF_APP_ESP8266_DEBUG);
+#else
+ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX);
+#endif
+
+#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ODIN
+#include "OdinWiFiInterface.h"
+
+OdinWiFiInterface wifi;
+#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_RTW
+#include "RTWInterface.h"
+RTWInterface wifi;
+
+#elif MBED_CONF_APP_NETWORK_INTERFACE == CELLULAR_UBLOX
+// Note: we use UbloxAtCellularInterfaceExt here but the same
+// example works with UbloxATCellularInterface or with UbloxPPPCellularInterface
+// simply uncomment/comment the correct options in the next few lines
+#include "UbloxATCellularInterfaceExt.h"
+//#include "UbloxPPPCellularInterface.h"
+//#include "UbloxATCellularInterface.h"
+
+UbloxATCellularInterfaceExt cellular;
+//UbloxPPPCellularInterface cellular;
+//UbloxATCellularInterface cellular;
+#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
+#include "EthernetInterface.h"
+EthernetInterface eth;
+#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_LOWPAN_ND
+#define MESH
+#include "NanostackInterface.h"
+LoWPANNDInterface mesh;
+#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_THREAD
+#define MESH
+#include "NanostackInterface.h"
+ThreadInterface mesh;
+#else
+#error "No connectivity method chosen. Please add 'config.network-interfaces.value' to your mbed_app.json (see README.md for more information)."
+#endif
+
+#if defined(MESH)
+#if MBED_CONF_APP_MESH_RADIO_TYPE == ATMEL
+#include "NanostackRfPhyAtmel.h"
+NanostackRfPhyAtmel rf_phy(ATMEL_SPI_MOSI, ATMEL_SPI_MISO, ATMEL_SPI_SCLK, ATMEL_SPI_CS,
+                           ATMEL_SPI_RST, ATMEL_SPI_SLP, ATMEL_SPI_IRQ, ATMEL_I2C_SDA, ATMEL_I2C_SCL);
+#elif MBED_CONF_APP_MESH_RADIO_TYPE == MCR20
+#include "NanostackRfPhyMcr20a.h"
+NanostackRfPhyMcr20a rf_phy(MCR20A_SPI_MOSI, MCR20A_SPI_MISO, MCR20A_SPI_SCLK, MCR20A_SPI_CS, MCR20A_SPI_RST, MCR20A_SPI_IRQ);
+#elif MBED_CONF_APP_MESH_RADIO_TYPE == SPIRIT1
+#include "NanostackRfPhySpirit1.h"
+NanostackRfPhySpirit1 rf_phy(SPIRIT1_SPI_MOSI, SPIRIT1_SPI_MISO, SPIRIT1_SPI_SCLK,
+			     SPIRIT1_DEV_IRQ, SPIRIT1_DEV_CS, SPIRIT1_DEV_SDN, SPIRIT1_BRD_LED);
+#elif MBED_CONF_APP_MESH_RADIO_TYPE == EFR32
+#include "NanostackRfPhyEfr32.h"
+NanostackRfPhyEfr32 rf_phy;
+#endif //MBED_CONF_APP_RADIO_TYPE
+#endif //MESH
+
+#ifndef MESH
+// This is address to mbed Device Connector
+#define MBED_SERVER_ADDRESS "coap://api.connector.mbed.com:5684"
+#else
+// This is address to mbed Device Connector
+#define MBED_SERVER_ADDRESS "coaps://[2607:f0d0:2601:52::20]:5684"
+#endif
+
+#ifdef MBED_CONF_APP_ESP8266_SSID
+#define MBED_CONF_APP_WIFI_SSID MBED_CONF_APP_ESP8266_SSID
+#endif
+
+#ifdef MBED_CONF_APP_ESP8266_PASSWORD
+#define MBED_CONF_APP_WIFI_PASSWORD MBED_CONF_APP_ESP8266_PASSWORD
+#endif
+
+/* \brief print_MAC - print_MAC  - helper function to print out MAC address
+ * in: network_interface - pointer to network i/f
+ *     bool log-messages   print out logs or not
+ * MAC address is print, if it can be acquired & log_messages is true.
+ *
+ */
+void print_MAC(NetworkInterface* network_interface, bool log_messages) {
+    const char *mac_addr = network_interface->get_mac_address();
+    if (mac_addr == NULL) {
+        if (log_messages) {
+            printf("[EasyConnect] ERROR - No MAC address\n");
+        }
+        return;
+    }
+    if (log_messages) {
+        printf("[EasyConnect] MAC address %s\n", mac_addr);
+    }
+}
+
+
+/* \brief easy_connect - easy_connect function to connect the pre-defined network bearer,
+ *                       config done via mbed_app.json (see README.md for details).
+ * IN: bool log_messages  print out diagnostics or not.
+ *
+ */
+NetworkInterface* easy_connect(bool log_messages = false) {
+    NetworkInterface* network_interface = 0;
+    int connect_success = -1;
+    /// This should be removed once mbedOS supports proper dual-stack
+#if defined (MESH) || (MBED_CONF_LWIP_IPV6_ENABLED==true)
+    printf("[EasyConnect] IPv6 mode\n");
+#else
+    printf("[EasyConnect] IPv4 mode\n");
+#endif
+
+ #if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266
+    if (log_messages) {
+        printf("[EasyConnect] Using WiFi (ESP8266) \n");
+        printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID);
+    }
+    network_interface = &wifi;
+    connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
+#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ODIN
+    if (log_messages) {
+        printf("[EasyConnect] Using WiFi (ODIN) \n");
+        printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID);
+    }
+    network_interface = &wifi;
+    connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
+#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_RTW
+    if (log_messages) {
+        printf("[EasyConnect] Using WiFi (RTW)\n");
+        printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID);
+    }
+    network_interface = &wifi;
+    connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
+#elif MBED_CONF_APP_NETWORK_INTERFACE == CELLULAR_UBLOX
+    if (log_messages) {
+        printf("[EasyConnect] Using Cellular (u-blox) \n");
+#if MBED_CONF_APP_APN
+        printf("[EasyConnect] Connecting to Cellular %s\n", MBED_CONF_APP_APN);
+#else
+        printf("[EasyConnect] Connecting to Cellular\n");
+#endif
+    }
+    network_interface = &cellular;
+    connect_success = cellular.connect(MBED_CONF_APP_DEFAULT_PIN, MBED_CONF_APP_APN, MBED_CONF_APP_USERNAME, MBED_CONF_APP_PASSWORD);
+#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
+    if (log_messages) {
+        printf("[EasyConnect] Using Ethernet\n");
+    }
+    network_interface = ð
+    connect_success = eth.connect();
+#endif
+
+#ifdef MESH
+    if (log_messages) {
+        printf("[EasyConnect] Using Mesh\n");
+        printf("[EasyConnect] Connecting to Mesh..\n");
+    }
+    network_interface = &mesh;
+    mesh.initialize(&rf_phy);
+    connect_success = mesh.connect();
+#endif
+    if(connect_success == 0) {
+        if (log_messages) {
+            printf("[EasyConnect] Connected to Network successfully\n");
+            print_MAC(network_interface, log_messages);
+        }
+    } else {
+        if (log_messages) {
+            print_MAC(network_interface, log_messages);
+            printf("[EasyConnect] Connection to Network Failed %d!\n", connect_success);
+        }
+        return NULL;
+    }
+    const char *ip_addr  = network_interface->get_ip_address();
+    if (ip_addr == NULL) {
+        if (log_messages) {
+            printf("[EasyConnect] ERROR - No IP address\n");
+        }
+        return NULL;
+    }
+    if (log_messages) {
+        printf("[EasyConnect] IP address %s\n", ip_addr);
+    }
+    return network_interface;
+}
+
+#endif // __EASY_CONNECT_H__