u-blox
This example establishes a transparent link between the mbed USB CDC port and the modem (LISA) on the C027. You can use it to use the standard u-blox tools such as m-center or any terminal program. These tools can then connect to the serial port and talk directly to the modem. Baudrate should be set to 115200 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/m-center.html
Dependencies: C027 UbloxUSBModem mbed
Fork of
C027_ModemTransparentSerial
by 
u-blox
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
History
pulled in new library, LISA-C requires to use CDC1
2013-12-06, by mazgch [Fri, 06 Dec 2013 09:54:21 +0000] rev 6
pulled in new library, LISA-C requires to use CDC1
use latest C027 library
2013-11-06, by mazgch [Wed, 06 Nov 2013 10:48:49 +0000] rev 5
use latest C027 library
new C027 lib
2013-11-05, by mazgch [Tue, 05 Nov 2013 21:43:15 +0000] rev 4
new C027 lib
use power config
2013-10-25, by mazgch [Fri, 25 Oct 2013 20:38:13 +0000] rev 3
use power config
version for USB CDC
2013-10-25, by mazgch [Fri, 25 Oct 2013 20:16:46 +0000] rev 2
version for USB CDC
fixed pinname
2013-10-23, by mazgch [Wed, 23 Oct 2013 06:12:48 +0000] rev 1
fixed pinname
Simple transparent serial port to the cellular modem,
2013-10-22, by mazgch [Tue, 22 Oct 2013 21:22:05 +0000] rev 0
Simple transparent serial port to the cellular modem,