u-blox
This example establishes a transparent link between the mbed USB CDC port and the modem (LISA) on the C027. You can use it to use the standard u-blox tools such as m-center or any terminal program. These tools can then connect to the serial port and talk directly to the modem. Baudrate should be set to 115200 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/m-center.html
Dependencies: C027 UbloxUSBModem mbed
Fork of
C027_ModemTransparentSerial
by 
u-blox
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
Revision 3:8d37a7a064f1, committed 2013-10-25
- Comitter:
- mazgch
- Date:
- Fri Oct 25 20:38:13 2013 +0000
- Parent:
- 2:20ff91824a26
- Child:
- 4:f61f3b7296da
- Commit message:
- use power config
Changed in this revision
| C027.lib | Show annotated file Show diff for this revision Revisions of this file |
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
--- a/C027.lib Fri Oct 25 20:16:46 2013 +0000 +++ b/C027.lib Fri Oct 25 20:38:13 2013 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/teams/ublox/code/C027/#7f910a8e77ee +http://mbed.org/teams/ublox/code/C027/#e3eab86f1de9
--- a/main.cpp Fri Oct 25 20:16:46 2013 +0000
+++ b/main.cpp Fri Oct 25 20:38:13 2013 +0000
@@ -1,5 +1,5 @@
#include "mbed.h"
-#include "C027_PinNames.h"
+#include "C027.h"
#include "WANDongle.h"
#include "USBSerialStream.h"
#include "UbloxCDMAModemInitializer.h"
@@ -7,6 +7,9 @@
int main()
{
+ C027 c027;
+ c027.mdmPower(true);
+
// open the mdm serial port
WANDongle mdmDongle;
USBSerialStream mdmStream(mdmDongle.getSerial(0/* the CDC usually 0 or 1*/ ));