Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.


Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png


How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:


How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:


Other demos ?

More demos you can find on our FTP

hal/common/RawSerial.cpp

Committer:
tvendov
Date:
2017-02-16
Revision:
0:6435b67ad23c

File content as of revision 0:6435b67ad23c:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "RawSerial.h"
#include "wait_api.h"
#include <cstdarg>

#if DEVICE_SERIAL

#define STRING_STACK_LIMIT    120

namespace mbed {

RawSerial::RawSerial(PinName tx, PinName rx) : SerialBase(tx, rx) {
    // No lock needed in the constructor
}

int RawSerial::getc() {
    lock();
    int ret = _base_getc();
    unlock();
    return ret;
}

int RawSerial::putc(int c) {
    lock();
    int ret = _base_putc(c);
    unlock();
    return ret;
}

int RawSerial::puts(const char *str) {
    lock();
    while (*str)
        putc(*str ++);
    unlock();
    return 0;
}

// Experimental support for printf in RawSerial. No Stream inheritance
// means we can't call printf() directly, so we use sprintf() instead.
// We only call malloc() for the sprintf() buffer if the buffer
// length is above a certain threshold, otherwise we use just the stack.
int RawSerial::printf(const char *format, ...) {
    lock();
    std::va_list arg;
    va_start(arg, format);
    // ARMCC microlib does not properly handle a size of 0.
    // As a workaround supply a dummy buffer with a size of 1.
    char dummy_buf[1];
    int len = vsnprintf(dummy_buf, sizeof(dummy_buf), format, arg);
    if (len < STRING_STACK_LIMIT) {
        char temp[STRING_STACK_LIMIT];
        vsprintf(temp, format, arg);
        puts(temp);
    } else {
        char *temp = new char[len + 1];
        vsprintf(temp, format, arg);
        puts(temp);
        delete[] temp;
    }
    va_end(arg);
    unlock();
    return len;
}

/** Acquire exclusive access to this serial port
 */
void RawSerial::lock() {
    // No lock used - external synchronization required
}

/** Release exclusive access to this serial port
 */
void RawSerial::unlock() {
    // No lock used - external synchronization required
}

} // namespace mbed

#endif