Vekatech
Lcd companion boards support (VKLCD50RTA & VKLCD70RT)
What is this ?
This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.
Supported companion Boards:
VKLCD50RTA
VKLCD70RT
How to Configure ?
You can choose which display is installed by altering the lcd_panel.h file
Leave the active one & comment out the others:
#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD50RTA //#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD70RT
You can alter the whole demo with your pictures if you like:
How to compile ?
- The Demo can be compiled in 3 modes:
- I. Execution from the internal 10-MB on-chip SRAM.
- II. Execution from the on-board serial FALSH in dual (32-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
- III. Execution from the on-board serial FALSH in single (16-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in single flash mode )
Quick presentation:
Other demos ?
More demos you can find on our FTP
Diff: hal/common/RawSerial.cpp
- Revision:
- 0:6435b67ad23c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/common/RawSerial.cpp Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,94 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "RawSerial.h"
+#include "wait_api.h"
+#include <cstdarg>
+
+#if DEVICE_SERIAL
+
+#define STRING_STACK_LIMIT 120
+
+namespace mbed {
+
+RawSerial::RawSerial(PinName tx, PinName rx) : SerialBase(tx, rx) {
+ // No lock needed in the constructor
+}
+
+int RawSerial::getc() {
+ lock();
+ int ret = _base_getc();
+ unlock();
+ return ret;
+}
+
+int RawSerial::putc(int c) {
+ lock();
+ int ret = _base_putc(c);
+ unlock();
+ return ret;
+}
+
+int RawSerial::puts(const char *str) {
+ lock();
+ while (*str)
+ putc(*str ++);
+ unlock();
+ return 0;
+}
+
+// Experimental support for printf in RawSerial. No Stream inheritance
+// means we can't call printf() directly, so we use sprintf() instead.
+// We only call malloc() for the sprintf() buffer if the buffer
+// length is above a certain threshold, otherwise we use just the stack.
+int RawSerial::printf(const char *format, ...) {
+ lock();
+ std::va_list arg;
+ va_start(arg, format);
+ // ARMCC microlib does not properly handle a size of 0.
+ // As a workaround supply a dummy buffer with a size of 1.
+ char dummy_buf[1];
+ int len = vsnprintf(dummy_buf, sizeof(dummy_buf), format, arg);
+ if (len < STRING_STACK_LIMIT) {
+ char temp[STRING_STACK_LIMIT];
+ vsprintf(temp, format, arg);
+ puts(temp);
+ } else {
+ char *temp = new char[len + 1];
+ vsprintf(temp, format, arg);
+ puts(temp);
+ delete[] temp;
+ }
+ va_end(arg);
+ unlock();
+ return len;
+}
+
+/** Acquire exclusive access to this serial port
+ */
+void RawSerial::lock() {
+ // No lock used - external synchronization required
+}
+
+/** Release exclusive access to this serial port
+ */
+void RawSerial::unlock() {
+ // No lock used - external synchronization required
+}
+
+} // namespace mbed
+
+#endif
+