Vekatech
Lcd companion boards support (VKLCD50RTA & VKLCD70RT)
What is this ?
This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.
Supported companion Boards:
VKLCD50RTA
VKLCD70RT
How to Configure ?
You can choose which display is installed by altering the lcd_panel.h file
Leave the active one & comment out the others:
#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD50RTA //#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD70RT
You can alter the whole demo with your pictures if you like:
How to compile ?
- The Demo can be compiled in 3 modes:
- I. Execution from the internal 10-MB on-chip SRAM.
- II. Execution from the on-board serial FALSH in dual (32-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
- III. Execution from the on-board serial FALSH in single (16-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in single flash mode )
Quick presentation:
Other demos ?
More demos you can find on our FTP
RGA/video/DisplayBase.cpp
- Committer:
- tvendov
- Date:
- 2017-02-16
- Revision:
- 0:6435b67ad23c
File content as of revision 0:6435b67ad23c:
/*******************************************************************************
* DISCLAIMER
* This software is supplied by Renesas Electronics Corporation and is only
* intended for use with Renesas products. No other uses are authorized. This
* software is owned by Renesas Electronics Corporation and is protected under
* all applicable laws, including copyright laws.
* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* Renesas reserves the right, without notice, to make changes to this software
* and to discontinue the availability of this software. By using this software,
* you agree to the additional terms and conditions found by accessing the
* following link:
* http://www.renesas.com/disclaimer
* Copyright (C) 2012 - 2015 Renesas Electronics Corporation. All rights reserved.
*******************************************************************************/
#include <string.h>
#include "DisplayBace.h"
#include "vdc5.h"
/**************************************************************************//**
* @brief Constructor of the DisplayBase class
* @param[in] None
* @retval None
******************************************************************************/
DisplayBase::DisplayBase( void )
{
/* Lcd setting (default) */
_lcd_config.lcd_type = LCD_TYPE_PARALLEL_RGB; /* LVDS or Pararel RGB */
_lcd_config.intputClock = 66.67f; /* P1 clk [MHz] ex. 66.67 */
_lcd_config.outputClock = 40.00f; /* LCD clk [MHz] ex. 33.33 */
_lcd_config.lcd_outformat = LCD_OUTFORMAT_RGB888; /* Output format select */
_lcd_config.lcd_edge = EDGE_FALLING; /* Output phase control of LCD_DATA23 to LCD_DATA0 pin */
_lcd_config.h_toatal_period = (800u + 40u + 128u+ 88u); /* Free-running Hsync period */
_lcd_config.v_toatal_period = (600u + 1u + 4u + 23u); /* Free-running Vsync period */
_lcd_config.h_disp_widht = 800u; /* LCD display area size, horizontal width */
_lcd_config.v_disp_widht = 600u; /* LCD display area size, vertical width */
_lcd_config.h_back_porch = (128u+ 88u); /* LCD display horizontal back porch period */
_lcd_config.v_back_porch = (4u + 23u); /* LCD display vertical back porch period */
_lcd_config.h_sync_port = LCD_TCON_PIN_0; /* TCONn or Not use(-1) */
_lcd_config.h_sync_port_polarity = SIG_POL_NOT_INVERTED; /* Polarity inversion control of signal */
_lcd_config.h_sync_width = 128u; /* Hsync width */
_lcd_config.v_sync_port = LCD_TCON_PIN_1; /* TCONn or Not use(-1) */
_lcd_config.v_sync_port_polarity = SIG_POL_NOT_INVERTED; /* Polarity inversion control of signal */
_lcd_config.v_sync_width = 4u; /* Vsync width */
_lcd_config.de_port = LCD_TCON_PIN_NON; /* TCONn or Not use(-1) */
_lcd_config.de_port_polarity = SIG_POL_NOT_INVERTED; /* Polarity inversion control of signal */
/* Digital video input setting (default) */
_video_input_sel = INPUT_SEL_VDEC; /* Video decoder output signals */
_video_ext_in_config.inp_format = VIDEO_EXTIN_FORMAT_BT601;
_video_ext_in_config.inp_pxd_edge = EDGE_RISING; /* Clock edge select for capturing data */
_video_ext_in_config.inp_vs_edge = EDGE_RISING; /* Clock edge select for capturing Vsync signals */
_video_ext_in_config.inp_hs_edge = EDGE_RISING; /* Clock edge select for capturing Hsync signals */
_video_ext_in_config.inp_endian_on = OFF; /* External input bit endian change on/off */
_video_ext_in_config.inp_swap_on = OFF; /* External input B/R signal swap on/off */
_video_ext_in_config.inp_vs_inv = SIG_POL_NOT_INVERTED; /* External input DV_VSYNC inversion control */
_video_ext_in_config.inp_hs_inv = SIG_POL_INVERTED; /* External input DV_HSYNC inversion control */
_video_ext_in_config.inp_f525_625 = EXTIN_LINE_525; /* Number of lines for BT.656 external input */
_video_ext_in_config.inp_h_pos = EXTIN_H_POS_CRYCBY; /* Y/Cb/Y/Cr data string start timing to Hsync reference */
_video_ext_in_config.cap_vs_pos = 6u; /* Capture start position from Vsync */
_video_ext_in_config.cap_hs_pos = 302u; /* Capture start position form Hsync */
_video_ext_in_config.cap_width = 640u; /* Capture width */
_video_ext_in_config.cap_height = 468u; /* Capture height should be a multiple of 4 */
} /* End of constructor method () */
/**************************************************************************//**
* @brief Graphics initialization processing
* @param[in] lcd_config : LCD configuration
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_init( lcd_config_t * lcd_config )
{
if( lcd_config != NULL ) {
_lcd_config.lcd_type = lcd_config->lcd_type; /* LVDS or Pararel RGB */
_lcd_config.intputClock = lcd_config->intputClock; /* P1 clk [MHz] ex. 66.67 */
_lcd_config.outputClock = lcd_config->outputClock; /* LCD clk [MHz] ex. 33.33 */
_lcd_config.lcd_outformat = lcd_config->lcd_outformat; /* Output format select */
_lcd_config.lcd_edge = lcd_config->lcd_edge; /* Output phase control of LCD_DATA23 to LCD_DATA0 pin */
_lcd_config.h_toatal_period = lcd_config->h_toatal_period; /* Free-running Hsync period */
_lcd_config.v_toatal_period = lcd_config->v_toatal_period; /* Free-running Vsync period */
_lcd_config.h_disp_widht = lcd_config->h_disp_widht; /* LCD display area size, horizontal width */
_lcd_config.v_disp_widht = lcd_config->v_disp_widht; /* LCD display area size, vertical width */
_lcd_config.h_back_porch = lcd_config->h_back_porch; /* LCD display horizontal back porch period */
_lcd_config.v_back_porch = lcd_config->v_back_porch; /* LCD display vertical back porch period */
_lcd_config.h_sync_port = lcd_config->h_sync_port; /* TCONn or Not use(-1) */
_lcd_config.h_sync_port_polarity = lcd_config->h_sync_port_polarity;/* Polarity inversion control of signal */
_lcd_config.h_sync_width = lcd_config->h_sync_width; /* Hsync width */
_lcd_config.v_sync_port = lcd_config->v_sync_port; /* TCONn or Not use(-1) */
_lcd_config.v_sync_port_polarity = lcd_config->v_sync_port_polarity;/* Polarity inversion control of signal */
_lcd_config.v_sync_width = lcd_config->v_sync_width; /* Vsync width */
_lcd_config.de_port = lcd_config->de_port; /* TCONn or Not use(-1) */
_lcd_config.de_port_polarity = lcd_config->de_port_polarity; /* Polarity inversion control of signal */
}
return (graphics_error_t)DRV_Graphics_Init( (drv_lcd_config_t *)&_lcd_config );
} /* End of method Graphics_init() */
/**************************************************************************//**
* @brief Graphics Video initialization processing
* @param[in] video_input_sel : Input select
* @param[in] video_ext_in_config : Digtal video input configuration
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Video_init( video_input_sel_t video_input_sel, video_ext_in_config_t * video_ext_in_config )
{
graphics_error_t error = GRAPHICS_OK;
if( _video_input_sel == INPUT_SEL_VDEC || _video_input_sel == INPUT_SEL_EXT ) {
_video_input_sel = video_input_sel;
} else {
error = GRAPHICS_PARAM_RANGE_ERR;
}
if( error == GRAPHICS_OK ) {
if( video_ext_in_config != NULL ) {
/* Signals supplied via the external input pins */
/* if using Video decoder output signals, not using value. */
_video_ext_in_config.inp_format = video_ext_in_config->inp_format;
_video_ext_in_config.inp_pxd_edge = video_ext_in_config->inp_pxd_edge;
_video_ext_in_config.inp_vs_edge = video_ext_in_config->inp_vs_edge;
_video_ext_in_config.inp_hs_edge = video_ext_in_config->inp_hs_edge;
_video_ext_in_config.inp_endian_on = video_ext_in_config->inp_endian_on;
_video_ext_in_config.inp_swap_on = video_ext_in_config->inp_swap_on;
_video_ext_in_config.inp_vs_inv = video_ext_in_config->inp_vs_inv;
_video_ext_in_config.inp_hs_inv = video_ext_in_config->inp_hs_inv;
_video_ext_in_config.inp_f525_625 = video_ext_in_config->inp_f525_625;
_video_ext_in_config.inp_h_pos = video_ext_in_config->inp_h_pos;
_video_ext_in_config.cap_vs_pos = video_ext_in_config->cap_vs_pos;
_video_ext_in_config.cap_hs_pos = video_ext_in_config->cap_hs_pos;
_video_ext_in_config.cap_width = video_ext_in_config->cap_width;
_video_ext_in_config.cap_height = video_ext_in_config->cap_height;
}
}
return (graphics_error_t)DRV_Graphics_Video_init( (drv_video_input_sel_t)video_input_sel,
(drv_video_ext_in_config_t *)&_video_ext_in_config );
} /* End of method Graphics_Video_init() */
/**************************************************************************//**
* @brief LCD I/O initialization processing
* @param[in] pin : Pointer of the pin assignment
* @param[in] pin_count : Total number of the pin assignment
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Lcd_Port_Init( PinName *pin, unsigned int pin_count )
{
return (graphics_error_t)DRV_Graphics_Lcd_Port_Init( pin, pin_count );
} /* End of method Graphics_Lcd_Port_Init() */
/**************************************************************************//**
* @brief LVDS I/O port initialization processing
* @param[in] pin : Pointer of the pin assignment
* @param[in] pin_count : Total number of the pin assignment
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Lvds_Port_Init( PinName *pin, unsigned int pin_count )
{
return (graphics_error_t)DRV_Graphics_Lvds_Port_Init( pin, pin_count );
} /* End of method Graphics_Lvds_Port_Init() */
/**************************************************************************//**
* @brief Digital video input I/O port initialization processing
* @param[in] pin : Pointer of the pin assignment
* @param[in] pin_count : Total number of the pin assignment
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Dvinput_Port_Init( PinName *pin, unsigned int pin_count )
{
return (graphics_error_t)DRV_Graphics_Dvinput_Port_Init( pin, pin_count );
} /* End of method Graphics_Dvinput_Port_Init() */
/**************************************************************************//**
* @brief IRQ interrupt handler setting
* @param[in] irq : VDC5 interrupt type
* @param[in] num : Interrupt line number
* @param[in] * callback : Interrupt callback function pointer
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Irq_Handler_Set( int_type_t irq, unsigned short num, void (* callback)(int_type_t) )
{
return (graphics_error_t)DRV_Graphics_Irq_Handler_Set( (vdc5_int_type_t)irq, num, (void (*)(vdc5_int_type_t))callback );
} /* End of method Graphics_Irq_Handler_Set() */
/**************************************************************************//**
* @brief Graphics surface read start processing
* @param[in] layer_id : Graphics layer ID
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Start( graphics_layer_t layer_id )
{
return (graphics_error_t)DRV_Graphics_Start( (drv_graphics_layer_t)layer_id );
} /* End of method Graphics_Start() */
/**************************************************************************//**
* @brief Graphics surface read stop processing
* @param[in] layer_id : Graphics layer ID
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Stop( graphics_layer_t layer_id )
{
return (graphics_error_t)DRV_Graphics_Stop( (drv_graphics_layer_t)layer_id );
} /* End of method Graphics_Stop() */
/**************************************************************************//**
* @brief Video surface write start processing
* @param[in] video_input_channel : Video input channel
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Start( video_input_channel_t video_input_channel )
{
graphics_error_t error = GRAPHICS_OK;
/* Digital video inputs : supporting video_input_channel 0 only. */
if( _video_input_sel == INPUT_SEL_EXT && video_input_channel == VIDEO_INPUT_CHANNEL_1 ) {
error = GRAPHICS_PARAM_RANGE_ERR;
}
if( error == GRAPHICS_OK ) {
error = (graphics_error_t)DRV_Video_Start( (drv_video_input_channel_t)video_input_channel );
}
return error;
} /* End of method Video_Start() */
/**************************************************************************//**
* @brief Video surface write stop processing
* @param[in] video_input_channel : Video input channel
* @retval error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Stop( video_input_channel_t video_input_channel )
{
graphics_error_t error = GRAPHICS_OK;
/* Digital video inputs : supporting video_input_channel 0 only. */
if( _video_input_sel == INPUT_SEL_EXT && video_input_channel == VIDEO_INPUT_CHANNEL_1 ) {
error = GRAPHICS_PARAM_RANGE_ERR;
}
if( error == GRAPHICS_OK ) {
error = (graphics_error_t)DRV_Video_Stop(
(drv_video_input_channel_t)video_input_channel );
}
return error;
} /* End of method Video_Stop() */
/**************************************************************************//**
* @brief Graphics surface read process setting
*
* Description:<br>
* This function supports the following 4 image format.
* YCbCr422, RGB565, RGB888, ARGB8888
* @param[in] layer_id : Graphics layer ID
* @param[in] framebuff : Base address of the frame buffer
* @param[in] fb_stride : Line offset address of the frame buffer
* @param[in] gr_format : Format of the frame buffer read signal
* @param[in] wr_rd_swa : frame buffer swap setting
* - WR_RD_WRSWA_NON : Not swapped: 1-2-3-4-5-6-7-8
* - WR_RD_WRSWA_8BIT : Swapped in 8-bit units: 2-1-4-3-6-5-8-7
* - WR_RD_WRSWA_16BIT : Swapped in 16-bit units: 3-4-1-2-7-8-5-6
* - WR_RD_WRSWA_16_8BIT : Swapped in 16-bit units + 8-bit units: 4-3-2-1-8-7-6-5
* - WR_RD_WRSWA_32BIT : Swapped in 32-bit units: 5-6-7-8-1-2-3-4
* - WR_RD_WRSWA_32_8BIT : Swapped in 32-bit units + 8-bit units: 6-5-8-7-2-1-4-3
* - WR_RD_WRSWA_32_16BIT : Swapped in 32-bit units + 16-bit units: 7-8-5-6-3-4-1-2
* - WR_RD_WRSWA_32_16_8BIT : Swapped in 32-bit units + 16-bit units + 8-bit units: 8-7-6-5-4-3-2-1
* @param[in] gr_rect : Graphics display area
* @retval Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Read_Setting(
graphics_layer_t layer_id,
void * framebuff,
unsigned int fb_stride,
graphics_format_t gr_format,
wr_rd_swa_t wr_rd_swa,
rect_t * gr_rect )
{
rect_t rect;
rect.hs = gr_rect->hs + _lcd_config.h_back_porch;
rect.vs = gr_rect->vs + _lcd_config.v_back_porch;
rect.hw = gr_rect->hw;
rect.vw = gr_rect->vw;
return (graphics_error_t)DRV_Graphics_Read_Setting(
(drv_graphics_layer_t)layer_id,
framebuff,
fb_stride,
(drv_graphics_format_t)gr_format,
(drv_wr_rd_swa_t)wr_rd_swa,
(drv_rect_t *)&rect );
} /* End of method Graphics_Read_Setting() */
/**************************************************************************//**
* @brief Graphics surface read process changing
*
* Description:<br>
* This function is used to swap buffers.
*
* @param[in] layer_id : Graphics layer ID
* @param[in] framebuff : Base address of the frame buffer
* @retval Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Read_Change ( graphics_layer_t layer_id, void * framebuff)
{
return (graphics_error_t)DRV_Graphics_Read_Change(
(drv_graphics_layer_t)layer_id, framebuff );
} /* End of method Graphics_Read_Change() */
/**************************************************************************//**
* @brief Graphics surface read process changing
*
* Description:<br>
* This function is used to swap buffers.
*
* @param[in] layer_id : Graphics layer ID
* @param[in] framebuff : Base address of the frame buffer
* @param[in] fb_stride : stride of the framebuff
* @param[in] slide_dir : slide direction
* @retval Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Read_Change_More ( graphics_layer_t layer_id, void * framebuff, unsigned int fb_stride, slide_t* slide_dir)
{
return (graphics_error_t)DRV_Graphics_Read_Change_More(
(drv_graphics_layer_t)layer_id, framebuff, fb_stride, (void *) slide_dir);
} /* End of method Graphics_Read_Change_More() */
/**************************************************************************//**
* @brief Video surface write process setting
* This function set the video write process. Input form is weave
* (progressive) mode fixed.
* This function supports the following 3 image format.
* YCbCr422, RGB565, RGB888
* @param[in] video_input_ch : Video input channel
* @param[in] col_sys : Analog video signal color system
* @param[in] adc_vinsel : Video input pin
* @param[in] framebuff : Base address of the frame buffer
* @param[in] fb_stride [byte] : Line offset address of the frame buffer
* @param[in] video_format : Frame buffer video-signal writing format
* - VIDEO_FORMAT_YCBCR422 : YCBCR422 (2byte/px)
* - VIDEO_FORMAT_RGB565 : RGB565 (2byte/px)
* - VIDEO_FORMAT_RGB888 : RGB888 (4byte/px)
* @param[in] wr_rd_swa : frame buffer swap setting
* - WR_RD_WRSWA_NON : Not swapped: 1-2-3-4-5-6-7-8
* - WR_RD_WRSWA_8BIT : Swapped in 8-bit units: 2-1-4-3-6-5-8-7
* - WR_RD_WRSWA_16BIT : Swapped in 16-bit units: 3-4-1-2-7-8-5-6
* - WR_RD_WRSWA_16_8BIT : Swapped in 16-bit units + 8-bit units: 4-3-2-1-8-7-6-5
* - WR_RD_WRSWA_32BIT : Swapped in 32-bit units: 5-6-7-8-1-2-3-4
* - WR_RD_WRSWA_32_8BIT : Swapped in 32-bit units + 8-bit units: 6-5-8-7-2-1-4-3
* - WR_RD_WRSWA_32_16BIT : Swapped in 32-bit units + 16-bit units: 7-8-5-6-3-4-1-2
* - WR_RD_WRSWA_32_16_8BIT : Swapped in 32-bit units + 16-bit units + 8-bit units: 8-7-6-5-4-3-2-1
* @param[in] video_write_size_vw [px]: output v width
* @param[in] video_write_size_hw [px]: output h width
* @param[in] video_adc_vinsel : Input pin control
* @retval Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Write_Setting(
video_input_channel_t video_input_channel,
graphics_video_col_sys_t col_sys,
void * framebuff,
unsigned int fb_stride,
video_format_t video_format,
wr_rd_swa_t wr_rd_swa,
unsigned short write_buff_vw,
unsigned short write_buff_hw,
video_adc_vinsel_t video_adc_vinsel )
{
graphics_error_t error = GRAPHICS_OK;
if( _video_input_sel == INPUT_SEL_VDEC ) {
#ifdef NO_SCALE_UP
if( col_sys == COL_SYS_NTSC_358 || col_sys == COL_SYS_NTSC_443 || col_sys == COL_SYS_NTSC_443_60 ) {
if( (write_buff_vw / 2u) > 240u ) {
error = GRAPHICS_VIDEO_NTSC_SIZE_ERR;
}
} else {
if( (write_buff_vw / 2u) > 280u ) {
error = GRAPHICS_VIDEO_PAL_SIZE_ERR;
}
}
if( write_buff_hw > 800u ) {
error = GRAPHICS_PARAM_RANGE_ERR;
}
#endif
if( error == GRAPHICS_OK ) {
error = (graphics_error_t)DRV_Video_Write_Setting(
(drv_video_input_channel_t)video_input_channel,
(drv_graphics_video_col_sys_t)col_sys,
framebuff,
fb_stride,
(drv_video_format_t)video_format,
(drv_wr_rd_swa_t)wr_rd_swa,
write_buff_vw,
write_buff_hw,
(drv_video_adc_vinsel_t)video_adc_vinsel);
}
} else if( _video_input_sel == INPUT_SEL_EXT ) {
rect_t cap_area;
cap_area.hs = _video_ext_in_config.cap_hs_pos * 2;
cap_area.hw = _video_ext_in_config.cap_width * 2;
cap_area.vs = _video_ext_in_config.cap_vs_pos;
cap_area.vw = _video_ext_in_config.cap_height;
error = (graphics_error_t) DRV_Video_Write_Setting_Digital(
framebuff,
fb_stride,
(drv_video_format_t)video_format,
(drv_wr_rd_swa_t)wr_rd_swa,
write_buff_vw,
write_buff_hw,
(drv_rect_t *)&cap_area );
} else {
error = GRAPHICS_PARAM_RANGE_ERR;
}
return error;
} /* End of method Video_Write_Setting() */
/**************************************************************************//**
* @brief Graphics surface write process changing
* This function is used to swap buffers of the weave write processing.
* @param[in] video_input_ch : Video input channle
* @param[in] framebuff : Base address of the frame buffer
* @param[in] fb_stride : Line offset address of the frame buffer
* @retval Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Write_Change (
video_input_channel_t video_input_channel, void * framebuff, uint32_t fb_stride )
{
return (graphics_error_t)DRV_Video_Write_Change(
(drv_video_input_channel_t)video_input_channel, framebuff, fb_stride );
} /* End of method Video_Write_Change() */
/* End of file */