Stage-1 Students SoCEM
Version of the IKS01A1 library for this coursework
Dependencies: X_NUCLEO_COMMON
Fork of
X_NUCLEO_IKS01A1
by 
ST
Diff: Components/hts221/hts221.h
- Revision:
- 24:92cc9c6e4b2b
- Parent:
- 4:566f2c41dc1d
diff -r 9da7be2a27c1 -r 92cc9c6e4b2b Components/hts221/hts221.h
--- a/Components/hts221/hts221.h Fri May 29 16:50:56 2015 +0200
+++ b/Components/hts221/hts221.h Wed Jun 03 14:57:57 2015 +0200
@@ -1,52 +1,52 @@
/**
- ******************************************************************************
- * @file hts221.h
- * @author MEMS Application Team
- * @version V1.2.0
- * @date 28-January-2015
- * @brief This file contains definitions for the hts221.c
- * firmware driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
+ ******************************************************************************
+ * @file hts221.h
+ * @author MEMS Application Team
+ * @version V1.2.0
+ * @date 11-February-2015
+ * @brief This file contains definitions for the hts221.c
+ * firmware driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __HTS221_H
#define __HTS221_H
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
-#include "../Common/hum_temp.h"
+#include "hum_temp.h"
/** @addtogroup BSP
* @{
@@ -54,19 +54,19 @@
/** @addtogroup Components
* @{
- */
-
+ */
+
/** @addtogroup HTS221
* @{
*/
-
+
/** @defgroup HTS221_Exported_Defines HTS221_Exported_Defines
* @{
*/
#ifndef NULL
- #define NULL (void *) 0
+#define NULL (void *) 0
#endif
-
+
/**
* @brief Device Address
*/
@@ -86,315 +86,315 @@
* \endcode
*/
#define HTS221_WHO_AM_I_ADDR 0x0F
-
+
- /**
- * @brief Humidity resolution Register
- * \code
- * Read/write
- * Default value: 0x1B
- * 7:6 RFU
- * 5:3 AVGT2-AVGT0: Temperature internal average.
- * AVGT2 | AVGT1 | AVGT0 | Nr. Internal Average
- * ------------------------------------------------------
- * 0 | 0 | 0 | 2
- * 0 | 0 | 1 | 4
- * 0 | 1 | 0 | 8
- * 0 | 1 | 1 | 16
- * 1 | 0 | 0 | 32
- * 1 | 0 | 1 | 64
- * 1 | 1 | 0 | 128
- * 1 | 1 | 1 | 256
- *
- * 2:0 AVGH2-AVGH0: Humidity internal average.
- * AVGH2 | AVGH1 | AVGH0 | Nr. Internal Average
- * ------------------------------------------------------
- * 0 | 0 | 0 | 4
- * 0 | 0 | 1 | 8
- * 0 | 1 | 0 | 16
- * 0 | 1 | 1 | 32
- * 1 | 0 | 0 | 64
- * 1 | 0 | 1 | 128
- * 1 | 1 | 0 | 256
- * 1 | 1 | 1 | 512
- *
- * \endcode
- */
+/**
+ * @brief Humidity resolution Register
+ * \code
+ * Read/write
+ * Default value: 0x1B
+ * 7:6 RFU
+ * 5:3 AVGT2-AVGT0: Temperature internal average.
+ * AVGT2 | AVGT1 | AVGT0 | Nr. Internal Average
+ * ------------------------------------------------------
+ * 0 | 0 | 0 | 2
+ * 0 | 0 | 1 | 4
+ * 0 | 1 | 0 | 8
+ * 0 | 1 | 1 | 16
+ * 1 | 0 | 0 | 32
+ * 1 | 0 | 1 | 64
+ * 1 | 1 | 0 | 128
+ * 1 | 1 | 1 | 256
+ *
+ * 2:0 AVGH2-AVGH0: Humidity internal average.
+ * AVGH2 | AVGH1 | AVGH0 | Nr. Internal Average
+ * ------------------------------------------------------
+ * 0 | 0 | 0 | 4
+ * 0 | 0 | 1 | 8
+ * 0 | 1 | 0 | 16
+ * 0 | 1 | 1 | 32
+ * 1 | 0 | 0 | 64
+ * 1 | 0 | 1 | 128
+ * 1 | 1 | 0 | 256
+ * 1 | 1 | 1 | 512
+ *
+ * \endcode
+ */
#define HTS221_RES_CONF_ADDR 0x10
- /**
- * @brief INFO Register (LSB data)
- * \code
- * Read/write
- * Default value: 0x00
- * 7:0 INFO7-INFO0: Lower part of the INFO reference
- * used for traceability of the sample.
- * \endcode
- */
+/**
+* @brief INFO Register (LSB data)
+* \code
+* Read/write
+* Default value: 0x00
+* 7:0 INFO7-INFO0: Lower part of the INFO reference
+* used for traceability of the sample.
+* \endcode
+*/
#define HTS221_INFO_L_ADDR 0x1E
- /**
- * @brief INFO & Calibration Version Register (LSB data)
- * \code
- * Read/write
- * Default value: 0x00
- * 7:6 CALVER1:CALVER0
- * 5:0 INFO13-INFO8: Higher part of the INFO reference
- * used for traceability of the sample.
- * \endcode
- */
+/**
+* @brief INFO & Calibration Version Register (LSB data)
+* \code
+* Read/write
+* Default value: 0x00
+* 7:6 CALVER1:CALVER0
+* 5:0 INFO13-INFO8: Higher part of the INFO reference
+* used for traceability of the sample.
+* \endcode
+*/
#define HTS221_INFO_H_ADDR 0x1F
- /**
- * @brief Humidity sensor control register 1
- * \code
- * Read/write
- * Default value: 0x00
- * 7 PD: power down control. 0 - disable; 1 - enable
- * 6:3 RFU
- * 2 BDU: block data update. 0 - disable; 1 - enable
- * 1:0 RFU
- * \endcode
- */
+/**
+* @brief Humidity sensor control register 1
+* \code
+* Read/write
+* Default value: 0x00
+* 7 PD: power down control. 0 - disable; 1 - enable
+* 6:3 RFU
+* 2 BDU: block data update. 0 - disable; 1 - enable
+* 1:0 RFU
+* \endcode
+*/
#define HTS221_CTRL_REG1_ADDR 0x20
- /**
- * @brief Humidity sensor control register 2
- * \code
- * Read/write
- * Default value: 0x00
- * 7 BOOT: Reboot memory content. 0: normal mode; 1: reboot memory content
- * 6:3 Reserved.
- * 2 Reserved.
- * 1 Reserved.
- * 0 ONE_SHOT: One shot enable. 0: waiting for start of conversion; 1: start for a new dataset
- * \endcode
- */
+/**
+* @brief Humidity sensor control register 2
+* \code
+* Read/write
+* Default value: 0x00
+* 7 BOOT: Reboot memory content. 0: normal mode; 1: reboot memory content
+* 6:3 Reserved.
+* 2 Reserved.
+* 1 Reserved.
+* 0 ONE_SHOT: One shot enable. 0: waiting for start of conversion; 1: start for a new dataset
+* \endcode
+*/
#define HTS221_CTRL_REG2_ADDR 0x21
-
- /**
- * @brief Humidity sensor control register 3
- * \code
- * Read/write
- * Default value: 0x00
- * [7] DRDY_H_L: Data Ready output signal active high, low (0: active high -default;1: active low)
- * [6] PP_OD: Push-pull / Open Drain selection on pin 3 (DRDY) (0: push-pull - default; 1: open drain)
- * [5:3] Reserved
- * [2] DRDY_EN: Data Ready enable (0: Data Ready disabled - default;1: Data Ready signal available on pin 3)
- * [1:0] Reserved
- * \endcode
- */
+
+/**
+* @brief Humidity sensor control register 3
+* \code
+* Read/write
+* Default value: 0x00
+* [7] DRDY_H_L: Data Ready output signal active high, low (0: active high -default;1: active low)
+* [6] PP_OD: Push-pull / Open Drain selection on pin 3 (DRDY) (0: push-pull - default; 1: open drain)
+* [5:3] Reserved
+* [2] DRDY_EN: Data Ready enable (0: Data Ready disabled - default;1: Data Ready signal available on pin 3)
+* [1:0] Reserved
+* \endcode
+*/
#define HTS221_CTRL_REG3_ADDR 0x22
-
-
- /**
- * @brief Status Register
- * \code
- * Read
- * Default value: 0x00
- * 7:2 RFU
- * 1 H_DA: Humidity data available. 0: new data for Humidity is not yet available; 1: new data for Humidity is available.
- * 0 T_DA: Temperature data available. 0: new data for temperature is not yet available; 1: new data for temperature is available.
- * \endcode
- */
+
+
+/**
+* @brief Status Register
+* \code
+* Read
+* Default value: 0x00
+* 7:2 RFU
+* 1 H_DA: Humidity data available. 0: new data for Humidity is not yet available; 1: new data for Humidity is available.
+* 0 T_DA: Temperature data available. 0: new data for temperature is not yet available; 1: new data for temperature is available.
+* \endcode
+*/
#define HTS221_STATUS_REG_ADDR 0x27
- /**
- * @brief Humidity data (LSB).
- * \code
- * Read
- * Default value: 0x00.
- * POUT7 - POUT0: Humidity data LSB (2's complement) => signed 16 bits
- * RAW Humidity output data: Hout(%)=(HUMIDITY_OUT_H & HUMIDITY_OUT_L).
- * \endcode
- */
+/**
+* @brief Humidity data (LSB).
+* \code
+* Read
+* Default value: 0x00.
+* POUT7 - POUT0: Humidity data LSB (2's complement) => signed 16 bits
+* RAW Humidity output data: Hout(%)=(HUMIDITY_OUT_H & HUMIDITY_OUT_L).
+* \endcode
+*/
#define HTS221_HUMIDITY_OUT_L_ADDR 0x28
- /**
- * @brief Humidity data (MSB).
- * \code
- * Read
- * Default value: 0x00.
- * POUT7 - POUT0: Humidity data LSB (2's complement) => signed 16 bits
- * RAW Humidity output data: Hout(%)=(HUMIDITY_OUT_H & HUMIDITY_OUT_L).
- * \endcode
- */
+/**
+* @brief Humidity data (MSB).
+* \code
+* Read
+* Default value: 0x00.
+* POUT7 - POUT0: Humidity data LSB (2's complement) => signed 16 bits
+* RAW Humidity output data: Hout(%)=(HUMIDITY_OUT_H & HUMIDITY_OUT_L).
+* \endcode
+*/
#define HTS221_HUMIDITY_OUT_H_ADDR 0x29
- /**
- * @brief Temperature data (LSB).
- * \code
- * Read
- * Default value: 0x00.
- * TOUT7 - TOUT0: temperature data LSB (2's complement) => signed 16 bits
- * RAW Temperature output data: Tout (LSB)=(TEMP_OUT_H & TEMP_OUT_L).
- * \endcode
- */
+/**
+* @brief Temperature data (LSB).
+* \code
+* Read
+* Default value: 0x00.
+* TOUT7 - TOUT0: temperature data LSB (2's complement) => signed 16 bits
+* RAW Temperature output data: Tout (LSB)=(TEMP_OUT_H & TEMP_OUT_L).
+* \endcode
+*/
#define HTS221_TEMP_OUT_L_ADDR 0x2A
- /**
- * @brief Temperature data (MSB).
- * \code
- * Read
- * Default value: 0x00.
- * TOUT15 - TOUT8: temperature data MSB (2's complement) => signed 16 bits
- * RAW Temperature output data: Tout (LSB)=(TEMP_OUT_H & TEMP_OUT_L).
- * \endcode
- */
+/**
+* @brief Temperature data (MSB).
+* \code
+* Read
+* Default value: 0x00.
+* TOUT15 - TOUT8: temperature data MSB (2's complement) => signed 16 bits
+* RAW Temperature output data: Tout (LSB)=(TEMP_OUT_H & TEMP_OUT_L).
+* \endcode
+*/
#define HTS221_TEMP_OUT_H_ADDR 0x2B
- /**
- *@brief Humidity 0 Register in %RH with sensitivity=2
- *\code
- * Read
- * Value: (Unsigned 8 Bit)/2
- *\endcode
- */
+/**
+*@brief Humidity 0 Register in %RH with sensitivity=2
+*\code
+* Read
+* Value: (Unsigned 8 Bit)/2
+*\endcode
+*/
#define HTS221_H0_RH_X2_ADDR 0x30
- /**
- *@brief Humidity 1 Register in %RH with sensitivity=2
- *\code
- * Read
- * Value: (Unsigned 8 Bit)/2
- *\endcode
- */
+/**
+*@brief Humidity 1 Register in %RH with sensitivity=2
+*\code
+* Read
+* Value: (Unsigned 8 Bit)/2
+*\endcode
+*/
#define HTS221_H1_RH_X2_ADDR 0x31
- /**
- *@brief Temperature 0 Register in deg with sensitivity=8
- *\code
- * Read
- * Value: (Unsigned 16 Bit)/2
- *\endcode
- */
+/**
+*@brief Temperature 0 Register in deg with sensitivity=8
+*\code
+* Read
+* Value: (Unsigned 16 Bit)/2
+*\endcode
+*/
#define HTS221_T0_degC_X8_ADDR 0x32
- /**
- *@brief Temperature 1 Register in deg with sensitivity=8
- *\code
- * Read
- * Value: (Unsigned 16 Bit)/2
- *\endcode
- */
+/**
+*@brief Temperature 1 Register in deg with sensitivity=8
+*\code
+* Read
+* Value: (Unsigned 16 Bit)/2
+*\endcode
+*/
#define HTS221_T1_degC_X8_ADDR 0x33
- /**
- *@brief Temperature 1/0 MSB Register in deg with sensitivity=8
- *\code
- * Read
- * Value: (Unsigned 16 Bit)/2
- * 3:2 T1(9):T1(8) MSB T1_degC_X8 bits
- * 1:0 T0(9):T0(8) MSB T0_degC_X8 bits
- *\endcode
- */
+/**
+*@brief Temperature 1/0 MSB Register in deg with sensitivity=8
+*\code
+* Read
+* Value: (Unsigned 16 Bit)/2
+* 3:2 T1(9):T1(8) MSB T1_degC_X8 bits
+* 1:0 T0(9):T0(8) MSB T0_degC_X8 bits
+*\endcode
+*/
#define HTS221_T1_T0_MSB_X8_ADDR 0x35
- /**
- *@brief Humidity LOW CALIBRATION Register
- *\code
- * Read
- * Default value: 0x00.
- * H0_T0_TOUT7 - H0_T0_TOUT0: HUMIDITY data lSB (2's complement) => signed 16 bits
- *\endcode
- */
+/**
+*@brief Humidity LOW CALIBRATION Register
+*\code
+* Read
+* Default value: 0x00.
+* H0_T0_TOUT7 - H0_T0_TOUT0: HUMIDITY data lSB (2's complement) => signed 16 bits
+*\endcode
+*/
#define HTS221_H0_T0_OUT_L_ADDR 0x36
- /**
- *@brief Humidity LOW CALIBRATION Register
- *\code
- * Read
- * Default value: 0x00.
- * H0_T0_TOUT15 - H0_T0_TOUT8: HUMIDITY data mSB (2's complement) => signed 16 bits
- *\endcode
- */
+/**
+*@brief Humidity LOW CALIBRATION Register
+*\code
+* Read
+* Default value: 0x00.
+* H0_T0_TOUT15 - H0_T0_TOUT8: HUMIDITY data mSB (2's complement) => signed 16 bits
+*\endcode
+*/
#define HTS221_H0_T0_OUT_H_ADDR 0x37
- /**
- *@brief Humidity HIGH CALIBRATION Register
- *\code
- * Read
- * Default value: 0x00.
- * H1_T0_TOUT7 - H1_T0_TOUT0: HUMIDITY data lSB (2's complement) => signed 16 bits
- *\endcode
- */
+/**
+*@brief Humidity HIGH CALIBRATION Register
+*\code
+* Read
+* Default value: 0x00.
+* H1_T0_TOUT7 - H1_T0_TOUT0: HUMIDITY data lSB (2's complement) => signed 16 bits
+*\endcode
+*/
#define HTS221_H1_T0_OUT_L_ADDR 0x3A
- /**
- *@brief Humidity HIGH CALIBRATION Register
- *\code
- * Read
- * Default value: 0x00.
- * H1_T0_TOUT15 - H1_T0_TOUT8: HUMIDITY data mSB (2's complement) => signed 16 bits
- *\endcode
- */
+/**
+*@brief Humidity HIGH CALIBRATION Register
+*\code
+* Read
+* Default value: 0x00.
+* H1_T0_TOUT15 - H1_T0_TOUT8: HUMIDITY data mSB (2's complement) => signed 16 bits
+*\endcode
+*/
#define HTS221_H1_T0_OUT_H_ADDR 0x3B
- /**
- * @brief Low Calibration Temperature Register (LSB).
- * \code
- * Read
- * Default value: 0x00.
- * T0_OUT7 - T0_OUT0: temperature data LSB (2's complement) => signed 16 bits
- * RAW LOW Calibration data: T0_OUT (LSB)=(T0_OUT_H & T0_OUT_L).
- * \endcode
- */
+/**
+* @brief Low Calibration Temperature Register (LSB).
+* \code
+* Read
+* Default value: 0x00.
+* T0_OUT7 - T0_OUT0: temperature data LSB (2's complement) => signed 16 bits
+* RAW LOW Calibration data: T0_OUT (LSB)=(T0_OUT_H & T0_OUT_L).
+* \endcode
+*/
#define HTS221_T0_OUT_L_ADDR 0x3C
- /**
- * @brief Low Calibration Temperature Register (MSB)
- * \code
- * Read
- * Default value: 0x00.
- * T0_OUT15 - T0_OUT8: temperature data MSB (2's complement) => signed 16 bits
- * RAW LOW Calibration data: T0_OUT (LSB)=(T0_OUT_H & T0_OUT_L).
- * \endcode
- */
+/**
+* @brief Low Calibration Temperature Register (MSB)
+* \code
+* Read
+* Default value: 0x00.
+* T0_OUT15 - T0_OUT8: temperature data MSB (2's complement) => signed 16 bits
+* RAW LOW Calibration data: T0_OUT (LSB)=(T0_OUT_H & T0_OUT_L).
+* \endcode
+*/
#define HTS221_T0_OUT_H_ADDR 0x3D
- /**
- * @brief Low Calibration Temperature Register (LSB).
- * \code
- * Read
- * Default value: 0x00.
- * T1_OUT7 - T1_OUT0: temperature data LSB (2's complement) => signed 16 bits
- * RAW LOW Calibration data: T1_OUT (LSB)=(T1_OUT_H & T1_OUT_L).
- * \endcode
- */
+/**
+* @brief Low Calibration Temperature Register (LSB).
+* \code
+* Read
+* Default value: 0x00.
+* T1_OUT7 - T1_OUT0: temperature data LSB (2's complement) => signed 16 bits
+* RAW LOW Calibration data: T1_OUT (LSB)=(T1_OUT_H & T1_OUT_L).
+* \endcode
+*/
#define HTS221_T1_OUT_L_ADDR 0x3E
- /**
- * @brief Low Calibration Temperature Register (MSB)
- * \code
- * Read
- * Default value: 0x00.
- * T1_OUT15 - T1_OUT8: temperature data MSB (2's complement) => signed 16 bits
- * RAW LOW Calibration data: T1_OUT (LSB)=(T1_OUT_H & T1_OUT_L).
- * \endcode
- */
+/**
+* @brief Low Calibration Temperature Register (MSB)
+* \code
+* Read
+* Default value: 0x00.
+* T1_OUT15 - T1_OUT8: temperature data MSB (2's complement) => signed 16 bits
+* RAW LOW Calibration data: T1_OUT (LSB)=(T1_OUT_H & T1_OUT_L).
+* \endcode
+*/
#define HTS221_T1_OUT_H_ADDR 0x3F
@@ -404,9 +404,9 @@
/**
* @brief Multiple Byte. Mask for enabling multiple byte read/write command.
- */
+ */
#define HTS221_I2C_MULTIPLEBYTE_CMD ((uint8_t)0x80)
-
+
/**
* @brief Device Identifier. Default value of the WHO_AM_I register.
*/
@@ -422,7 +422,7 @@
#define HTS221_MODE_MASK ((uint8_t)0x80)
/**
* @}
- */
+ */
/** @defgroup HTS221_Block_Data_Update_Mode_Selection_CTRL_REG1 HTS221_Block_Data_Update_Mode_Selection_CTRL_REG1
@@ -459,7 +459,7 @@
#define HTS221_BOOT_MASK ((uint8_t)0x80)
/**
* @}
- */
+ */
/** @defgroup HTS221_One_Shot_Selection_CTRL_REG2 HTS221_One_Shot_Selection_CTRL_REG2
@@ -540,26 +540,28 @@
/* Data resolution */
#define HUM_DECIMAL_DIGITS (2)
#define TEMP_DECIMAL_DIGITS (2)
-
+
/**
* @}
*/
-
+
/** @defgroup HTS221_Imported_Functions HTS221_Imported_Functions
* @{
*/
/* HUM_TEMP sensor IO functions */
extern HUM_TEMP_StatusTypeDef HTS221_IO_Init(void);
-extern HUM_TEMP_StatusTypeDef HTS221_IO_Write(uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr, uint16_t NumByteToWrite);
-extern HUM_TEMP_StatusTypeDef HTS221_IO_Read(uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr, uint16_t NumByteToRead);
+extern HUM_TEMP_StatusTypeDef HTS221_IO_Write(uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr,
+ uint16_t NumByteToWrite);
+extern HUM_TEMP_StatusTypeDef HTS221_IO_Read(uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr,
+ uint16_t NumByteToRead);
extern void HTS221_IO_ITConfig( void );
/**
* @}
*/
-/* ------------------------------------------------------- */
+/* ------------------------------------------------------- */
/* Here you should declare the internal struct of */
/* extended features of HTS221. See the example of */
/* LSM6DS3 in lsm6ds3.h */
@@ -573,25 +575,25 @@
extern HUM_TEMP_DrvExtTypeDef Hts221Drv_ext;
/**
* @}
- */
-
+ */
+
/**
* @}
- */
+ */
/**
* @}
- */
+ */
/**
* @}
- */
-
+ */
+
#ifdef __cplusplus
- }
+}
#endif
-
+
#endif /* __HTS221_H */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/