ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: source/libs/Contiki_STM32_Library/spirit1.h

Revision:
75:8dc65c09af67
Parent:
67:93bec0baf1de
diff -r 7672516efa2a -r 8dc65c09af67 source/libs/Contiki_STM32_Library/spirit1.h
--- a/source/libs/Contiki_STM32_Library/spirit1.h	Fri Jul 21 15:30:53 2017 +0200
+++ b/source/libs/Contiki_STM32_Library/spirit1.h	Fri Sep 01 08:51:04 2017 +0200
@@ -91,7 +91,13 @@
 
 /* Exported constants --------------------------------------------------------*/
 
-/*  Radio configuration parameters  */
+/* Radio configuration parameters  */
+/* General Remarks:
+ * Two SPSGRF modules will only communicate when both are having same frequency , same channel number,
+ * same modulation scheme, same data rate, etc.
+ * For example, the SPSGRF-915 module supports frequencies 902 to 928 MHz. User can select any frequency
+ * between this band.
+ */
 #define XTAL_OFFSET_PPM             0
 #define INFINITE_TIMEOUT            0.0
 
@@ -104,8 +110,7 @@
 #endif
 
 #ifdef USE_SPIRIT1_915MHz
-//#define BASE_FREQUENCY              915.0e6
-#define BASE_FREQUENCY              902.0e6
+#define BASE_FREQUENCY              915.0e6
 #endif