Diff: libs/spirit1/SPIRIT1_Library/Src/SPIRIT_LinearFifo.c

Revision:

0:4fb29d9ee571

Child:

5:c9c5bc673c64

diff -r 000000000000 -r 4fb29d9ee571 libs/spirit1/SPIRIT1_Library/Src/SPIRIT_LinearFifo.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_LinearFifo.c	Thu Oct 13 15:41:39 2016 +0200
@@ -0,0 +1,338 @@
+/**
+  ******************************************************************************
+  * @file    SPIRIT_LinearFifo.c
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+  * @brief   Configuration and management of SPIRIT Fifo.
+  * @details
+  *
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_LinearFifo.h"
+#include "MCU_Interface.h"
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @addtogroup SPIRIT_LinearFifo
+ * @{
+ */
+
+
+/**
+ * @defgroup LinearFifo_Private_TypesDefinitions        Linear FIFO Private Types Definitions
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup LinearFifo_Private_Defines                 Linear FIFO Private Defines
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup LinearFifo_Private_Macros                  Linear FIFO Private Macros
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup LinearFifo_Private_Variables               Linear FIFO Private Variables
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup LinearFifo_Private_FunctionPrototypes      Linear FIFO Private Function Prototypes
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup LinearFifo_Private_Functions               Linear FIFO Private Functions
+ * @{
+ */
+
+/**
+ * @brief  Returns the number of elements in the Rx FIFO.
+ * @param  None.
+ * @retval uint8_t Number of elements in the Rx FIFO.
+ */
+uint8_t SpiritLinearFifoReadNumElementsRxFifo(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(LINEAR_FIFO_STATUS0_BASE, 1, &tempRegValue);
+
+  /* Build and return value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Returns the number of elements in the Tx FIFO.
+ * @param  None.
+ * @retval uint8_t Number of elements in the Tx FIFO.
+ */
+uint8_t SpiritLinearFifoReadNumElementsTxFifo(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the number of elements in TX FIFO and return the value */
+  g_xStatus = SpiritSpiReadRegisters(LINEAR_FIFO_STATUS1_BASE, 1, &tempRegValue);
+
+  /* Build and return value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Sets the almost full threshold for the Rx FIFO. When the number of elements in RX FIFO reaches this value an interrupt can be generated to the MCU.
+ * @note   The almost full threshold is encountered from the top of the FIFO. For example, if it is set to 7 the almost
+ *         full FIFO irq will be raised when the number of elements is equals to 96-7 = 89.
+ * @param  cThrRxFifo almost full threshold.
+ * 	   This parameter is an uint8_t.
+ * @retval None.
+ */
+void SpiritLinearFifoSetAlmostFullThresholdRx(uint8_t cThrRxFifo)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_FIFO_THR(cThrRxFifo));
+
+  /* Build the register value */
+  tempRegValue = cThrRxFifo & 0x7F;
+
+  /* Writes the Almost Full threshold for RX in the corresponding register */
+  g_xStatus = SpiritSpiWriteRegisters(FIFO_CONFIG3_RXAFTHR_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the almost full threshold for RX FIFO.
+ * @note   The almost full threshold is encountered from the top of the FIFO. For example, if it is 7 the almost
+ *         full FIFO irq will be raised when the number of elements is equals to 96-7 = 89.
+ * @param  None.
+ * @retval uint8_t Almost full threshold for Rx FIFO.
+ */
+uint8_t SpiritLinearFifoGetAlmostFullThresholdRx(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the almost full threshold for RX FIFO and return the value */
+  g_xStatus = SpiritSpiReadRegisters(FIFO_CONFIG3_RXAFTHR_BASE, 1, &tempRegValue);
+
+  /* Build and return value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Sets the almost empty threshold for the Rx FIFO. When the number of elements in RX FIFO reaches this value an interrupt can be generated to the MCU.
+ * @param  cThrRxFifo almost empty threshold.
+ * 	   This parameter is an uint8_t.
+ * @retval None.
+ */
+void SpiritLinearFifoSetAlmostEmptyThresholdRx(uint8_t cThrRxFifo)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_FIFO_THR(cThrRxFifo));
+
+  /* Build the register value */
+  tempRegValue = cThrRxFifo & 0x7F;
+
+  /* Writes the Almost Empty threshold for RX in the corresponding register */
+  g_xStatus = SpiritSpiWriteRegisters(FIFO_CONFIG2_RXAETHR_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the almost empty threshold for Rx FIFO.
+ * @param  None.
+ * @retval uint8_t Almost empty threshold for Rx FIFO.
+ */
+uint8_t SpiritLinearFifoGetAlmostEmptyThresholdRx(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the almost empty threshold for RX FIFO and returns the value */
+  g_xStatus = SpiritSpiReadRegisters(FIFO_CONFIG2_RXAETHR_BASE, 1, &tempRegValue);
+
+  /* Build and return value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Sets the almost full threshold for the Tx FIFO. When the number of elements in TX FIFO reaches this value an interrupt can be generated to the MCU.
+ * @note   The almost full threshold is encountered from the top of the FIFO. For example, if it is set to 7 the almost
+ *         full FIFO irq will be raised when the number of elements is equals to 96-7 = 89.
+ * @param  cThrTxFifo almost full threshold.
+ * 	   This parameter is an uint8_t.
+ * @retval None.
+ */
+void SpiritLinearFifoSetAlmostFullThresholdTx(uint8_t cThrTxFifo)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_FIFO_THR(cThrTxFifo));
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(FIFO_CONFIG1_TXAFTHR_BASE, 1, &tempRegValue);
+
+  /* Build the register value */
+  tempRegValue &= 0x80;
+  tempRegValue |= cThrTxFifo;
+
+  /* Writes the Almost Full threshold for Tx in the corresponding register */
+  g_xStatus = SpiritSpiWriteRegisters(FIFO_CONFIG1_TXAFTHR_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the almost full threshold for Tx FIFO.
+ * @note   The almost full threshold is encountered from the top of the FIFO. For example, if it is set to 7 the almost
+ *         full FIFO irq will be raised when the number of elements is equals to 96-7 = 89.
+ * @param  None.
+ * @retval uint8_t Almost full threshold for Tx FIFO.
+ */
+uint8_t SpiritLinearFifoGetAlmostFullThresholdTx(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the almost full threshold for Tx FIFO and returns the value */
+  g_xStatus = SpiritSpiReadRegisters(FIFO_CONFIG1_TXAFTHR_BASE, 1, &tempRegValue);
+
+  /* Build and returns value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Sets the almost empty threshold for the Tx FIFO. When the number of elements in Tx FIFO reaches this value an interrupt can can be generated to the MCU.
+ * @param  cThrTxFifo: almost empty threshold.
+ *         This parameter is an uint8_t.
+ * @retval None.
+ */
+void SpiritLinearFifoSetAlmostEmptyThresholdTx(uint8_t cThrTxFifo)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_FIFO_THR(cThrTxFifo));
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(FIFO_CONFIG0_TXAETHR_BASE, 1, &tempRegValue);
+
+  /* Build the register value */
+  tempRegValue &= 0x80;
+  tempRegValue |= cThrTxFifo;
+
+  /* Writes the Almost Empty threshold for Tx in the corresponding register */
+  g_xStatus = SpiritSpiWriteRegisters(FIFO_CONFIG0_TXAETHR_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the almost empty threshold for Tx FIFO.
+ * @param  None.
+ * @retval uint8_t Almost empty threshold for Tx FIFO.
+ */
+uint8_t SpiritLinearFifoGetAlmostEmptyThresholdTx(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the almost empty threshold for TX FIFO and returns the value */
+  g_xStatus = SpiritSpiReadRegisters(FIFO_CONFIG0_TXAETHR_BASE, 1, &tempRegValue);
+
+  /* Build and return value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ *@}
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/