ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: source/NanostackRfPhySpirit1.cpp

Revision:
58:4208689e447e
Parent:
53:b036a3a850e6
Child:
59:5dbfc9faf1c5
diff -r 8cc871dc6cac -r 4208689e447e source/NanostackRfPhySpirit1.cpp
--- a/source/NanostackRfPhySpirit1.cpp	Fri Apr 28 14:11:53 2017 +0200
+++ b/source/NanostackRfPhySpirit1.cpp	Mon May 15 14:59:13 2017 +0200
@@ -91,8 +91,10 @@
 
     /*Check if transmitter is busy*/
     if(rf_device->is_receiving()) { /* betzw - WAS: (rf_device->channel_clear() != 0)), do NOT use this but rather study and enable automatic CCA */
+#ifdef HEAVY_TRACING
 	tr_debug("%s (%d)", __func__, __LINE__);
-
+#endif
+	
 	/* Release Lock */
 	rf_if_unlock();
 
@@ -632,7 +634,9 @@
 	    /*Send the packet*/
 	    rf_device->send((uint8_t*)buffer, 3);
 
+#ifdef HEAVY_TRACING
 	    tr_debug("%s (%d), hdr=%x, nr=%x", __func__, __LINE__, buffer[0], ptr[0]);
+#endif
 	}
 
 	if(signals & RF_SIG_CB_TX_DONE) {