Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4
in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4
- Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5
defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
mbed_lib.json@52:053dbc4b570f, 2017-02-23 (annotated)
- Committer:
- Wolfgang Betz
- Date:
- Thu Feb 23 13:29:35 2017 +0100
- Revision:
- 52:053dbc4b570f
- Parent:
- 36:cc14f5a17bd4
Simplify Spirit1 Mac address specification
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Wolfgang Betz |
36:cc14f5a17bd4 | 1 | { |
Wolfgang Betz |
36:cc14f5a17bd4 | 2 | "name": "spirit1", |
Wolfgang Betz |
36:cc14f5a17bd4 | 3 | "config": { |
Wolfgang Betz |
52:053dbc4b570f | 4 | "mac-address": "{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}" |
Wolfgang Betz |
36:cc14f5a17bd4 | 5 | }, |
Wolfgang Betz |
36:cc14f5a17bd4 | 6 | "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"] |
Wolfgang Betz |
36:cc14f5a17bd4 | 7 | } |