Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4
in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4
- Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5
defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
source/libs/Contiki_STM32_Library/ip64-conf.h
- Committer:
- Wolfgang Betz
- Date:
- 2018-01-18
- Revision:
- 77:a9a9807bf3ed
- Parent:
- 34:edda6a7238ec
File content as of revision 77:a9a9807bf3ed:
/* * Copyright (c) 2012, Thingsquare, http://www.thingsquare.com/. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef IP64_CONF_H #define IP64_CONF_H /* #include "ip64-tap-driver.h" #include "ip64-eth-interface.h" #define IP64_CONF_UIP_FALLBACK_INTERFACE ip64_eth_interface #define IP64_CONF_INPUT ip64_eth_interface_input #define IP64_CONF_ETH_DRIVER ip64_tap_driver #undef UIP_FALLBACK_INTERFACE #define UIP_FALLBACK_INTERFACE ip64_uip_fallback_interface */ #ifdef MY_DRIVERS #include <my_wifi_interface.h> #include <my_wifi_driver.h> #define IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP 0 #define IP64_CONF_UIP_FALLBACK_INTERFACE my_wifi_interface #define IP64_CONF_INPUT my_wifi_interface_input #define IP64_CONF_ETH_DRIVER my_wifi_driver #undef UIP_CONF_ND6_RA_RDNSS #define UIP_CONF_ND6_RA_RDNSS 1 #undef UIP_CONF_ND6_SEND_RA #define UIP_CONF_ND6_SEND_RA 1 #undef UIP_CONF_ROUTER #define UIP_CONF_ROUTER 1 #ifndef QUEUEBUF_CONF_NUM #define QUEUEBUF_CONF_NUM 16 #endif #else #include "net/ip64/ip64-slip-interface.h" #include "net/ip64/ip64-null-driver.h" #define IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP 1 #define IP64_CONF_UIP_FALLBACK_INTERFACE ip64_slip_interface #define IP64_CONF_INPUT ip64_slip_interface_input #define IP64_CONF_ETH_DRIVER ip64_null_driver #undef UIP_CONF_ND6_RA_RDNSS #define UIP_CONF_ND6_RA_RDNSS 1 #undef UIP_CONF_ND6_SEND_RA #define UIP_CONF_ND6_SEND_RA 1 #undef UIP_CONF_ROUTER #define UIP_CONF_ROUTER 1 #ifndef QUEUEBUF_CONF_NUM #define QUEUEBUF_CONF_NUM 16 #endif #endif//MY_DRIVERS #endif /* IP64_CONF_H */