ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

mbed_lib.json

Committer:
Wolfgang Betz
Date:
2017-09-01
Revision:
75:8dc65c09af67
Parent:
52:053dbc4b570f

File content as of revision 75:8dc65c09af67:

{
    "name": "spirit1",
    "config": {
	"mac-address": "{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}"
    },
    "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"]
}