Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4
in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4
- Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5
defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h
- Revision:
- 34:edda6a7238ec
- Child:
- 67:93bec0baf1de
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h Tue Nov 22 11:40:10 2016 +0100 @@ -0,0 +1,120 @@ +/** +****************************************************************************** +* @file radio_shield_config.h +* @author System Lab - NOIDA +* @version V1.0.0 +* @date 15-May-2014 +* @brief This file contains definitions for: +* - LEDs and push-button available on RF shields +****************************************************************************** +* @attention +* +* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> +* +* Redistribution and use in source and binary forms, with or without modification, +* are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* 3. Neither the name of STMicroelectronics nor the names of its contributors +* may be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +****************************************************************************** +*/ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __RADIO_SHIELD_CONFIG_H +#define __RADIO_SHIELD_CONFIG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#ifdef USE_STM32L1XX_NUCLEO +// #include "stm32l1xx_hal.h" +#endif + +#ifdef USE_STM32F4XX_NUCLEO +// #include "stm32f4xx_hal.h" +#endif + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup X-NUCLEO-IDS02Ax + * @{ + */ + +/** @addtogroup RADIO_SHILED_LOW_LEVEL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +typedef enum +{ + RADIO_SHIELD_LED = 0 +} Led_t; + + + +/* Exported constants --------------------------------------------------------*/ + + +/* Exported macro ------------------------------------------------------------*/ + /** @addtogroup RF_SHIELD_CONFIG_LOW_LEVEL_LED + * @{ + */ +#define RADIO_SHIELD_LEDn ((uint8_t)1) + +#define RADIO_SHIELD_LED_GPIO_PIN GPIO_PIN_4 /*Rx Indicator LED*/ +#define RADIO_SHIELD_LED_GPIO_PORT GPIOB +#define RADIO_SHIELD_LED_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() +#define RADIO_SHIELD_LED_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE() + + +/* Exported Variables ------------------------------------------------------------*/ + + +/* Exported functions ------------------------------------------------------- */ +void RadioShieldLedInit(Led_t Led); +void RadioShieldLedOn(Led_t Led); +void RadioShieldLedOff(Led_t Led); +void RadioShieldLedToggle(Led_t Led); + + + +#ifdef __cplusplus +} +#endif + +#endif /* __RADIO_SHIELD_CONFIG_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +