Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4
in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4
- Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5
defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: mbed_lib.json
- Revision:
- 36:cc14f5a17bd4
- Child:
- 52:053dbc4b570f
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed_lib.json Tue Nov 22 14:05:39 2016 +0100 @@ -0,0 +1,14 @@ +{ + "name": "spirit1", + "config": { + "mac-address-0": "0x0", + "mac-address-1": "0x0", + "mac-address-2": "0x0", + "mac-address-3": "0x0", + "mac-address-4": "0x0", + "mac-address-5": "0x0", + "mac-address-6": "0x0", + "mac-address-7": "0x0" + }, + "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"] +}