ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: source/libs/Contiki_STM32_Library/platform-conf.h

Revision:
67:93bec0baf1de
Parent:
34:edda6a7238ec
--- a/source/libs/Contiki_STM32_Library/platform-conf.h	Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/Contiki_STM32_Library/platform-conf.h	Thu Jul 06 11:13:31 2017 +0200
@@ -1,197 +1,197 @@
-/**
-******************************************************************************
-* @file    platform/stm32nucleo-spirit1/platform-conf.h
-* @author  System LAB 
-* @version V1.0.0
-* @date    17-May-2015
-* @brief   Configuration parameters
-******************************************************************************
-* @attention
-*
-* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*   1. Redistributions of source code must retain the above copyright notice,
-*      this list of conditions and the following disclaimer.
-*   2. Redistributions in binary form must reproduce the above copyright notice,
-*      this list of conditions and the following disclaimer in the documentation
-*      and/or other materials provided with the distribution.
-*   3. Neither the name of STMicroelectronics nor the names of its contributors
-*      may be used to endorse or promote products derived from this software
-*      without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************
-*/
-/*---------------------------------------------------------------------------*/
-/**
- * \addtogroup stm32nucleo-spirit1
- * @{
- *
- * \defgroup stm32nucleo-spirit1-peripherals User Button on STM32 Nucleo
- *
- * Defines some of the platforms capabilities
- * @{
- *
- * \file
- * Header file for the stm32nucleo-spirit1 platform configuration
- */
-/*---------------------------------------------------------------------------*/
-#ifndef __PLATFORM_CONF_H__
-#define __PLATFORM_CONF_H__
-/*---------------------------------------------------------------------------*/
-#ifdef USE_STM32L1XX_NUCLEO
-#include <inttypes.h>
-#include <string.h>
-/*---------------------------------------------------------------------------*/
-#define PLATFORM_HAS_LEDS 1
-#define PLATFORM_HAS_BUTTON 1
-#define PLATFORM_HAS_RADIO 1
-
-#define LEDS_GREEN  1 /*Nucleo LED*/
-#define LEDS_RED    2 /*SPIRIT1 LED*/
-
-#ifdef COMPILE_SENSORS
-#define LEDS_CONF_ALL 1 /*Can't use SPIRIT1 LED in this case*/
-#else
-#define LEDS_CONF_ALL 3 /*No sensors -> we can use SPIRIT1 LED in this case*/
-#endif /*COMPILE_SENSORS*/
-/*---------------------------------------------------------------------------*/
-#define F_CPU                   32000000ul
-#define RTIMER_ARCH_SECOND              32768   
-#define PRESCALER       ((F_CPU / (RTIMER_ARCH_SECOND*2)))
-
-#define UART1_CONF_TX_WITH_INTERRUPT        0
-#define WITH_SERIAL_LINE_INPUT              1
-#define TELNETD_CONF_NUMLINES               6
-#define NETSTACK_CONF_RADIO                 spirit_radio_driver
-#define NETSTACK_RADIO_MAX_PAYLOAD_LEN      96 /* spirit1-config.h */
-
-#if WITH_IP64
-#include "ip64-conf.h"
-#define WITH_SLIP 1
-#ifndef UIP_FALLBACK_INTERFACE
-#define UIP_FALLBACK_INTERFACE ip64_uip_fallback_interface
-#endif
-#endif /* WITH_IP64 */
-
-/*---------------------------------------------------------------------------*/
-/* define ticks/second for slow and fast clocks. Notice that these should be a
-  power of two, eg 64,128,256,512 etc, for efficiency as POT's can be optimized
-  well. */
-#define CLOCK_CONF_SECOND             128
-#define RELOAD_VALUE        ((F_CPU/CLOCK_CONF_SECOND) - 1)
-/* One tick: 62.5 ms */
-
-#define RTIMER_CLOCK_LT(a,b)     ((signed short)((a)-(b)) < 0)
-/*---------------------------------------------------------------------------*/
-typedef unsigned long clock_time_t;     
-typedef unsigned long long rtimer_clock_t; 
-/*---------------------------------------------------------------------------*/
-#define CC_CONF_REGISTER_ARGS          0
-#define CC_CONF_FUNCTION_POINTER_ARGS  1
-#define CC_CONF_FASTCALL
-#define CC_CONF_VA_ARGS                1
-#define CC_CONF_INLINE                 inline
-
-#define CCIF
-#define CLIF
-/*---------------------------------------------------------------------------*/
-typedef uint8_t         u8_t;
-typedef uint16_t        u16_t;
-typedef uint32_t        u32_t;
-typedef  int32_t        s32_t;
-typedef unsigned short  uip_stats_t;
-/*---------------------------------------------------------------------------*/
-#define MULTICHAN_CONF_SET_CHANNEL(x)
-#define MULTICHAN_CONF_READ_RSSI(x) 0
-/*---------------------------------------------------------------------------*/
-#endif//USE_STM32L1XX_NUCLEO
-
-#ifdef USE_STM32F4XX_NUCLEO
-#include <inttypes.h>
-#include <string.h>
-#include "main.h"
-/*---------------------------------------------------------------------------*/
-#define PLATFORM_HAS_LEDS 1
-#define PLATFORM_HAS_BUTTON 1
-#define PLATFORM_HAS_RADIO 1
-
-#define LEDS_GREEN  1 /*Nucleo LED*/
-#define LEDS_RED    2 /*SPIRIT1 LED*/
-
-#ifdef COMPILE_SENSORS
-#define LEDS_CONF_ALL 1 /*Can't use SPIRIT1 LED in this case*/
-#else
-#define LEDS_CONF_ALL 3 /*No sensors -> we can use SPIRIT1 LED in this case*/
-#endif /*COMPILE_SENSORS*/
-/*---------------------------------------------------------------------------*/
-#define F_CPU                   	84000000ul
-#define RTIMER_ARCH_SECOND          96000//32678
-//#define PRESCALER       			uwPrescalerValue
-
-#define UART1_CONF_TX_WITH_INTERRUPT        0
-#define WITH_SERIAL_LINE_INPUT              1
-#define TELNETD_CONF_NUMLINES               6
-#define NETSTACK_CONF_RADIO                 spirit_radio_driver
-#define NETSTACK_RADIO_MAX_PAYLOAD_LEN      96 /* spirit1-config.h */
-
-#if WITH_IP64
-#include "ip64-conf.h"
-#define WITH_SLIP 1
-#ifndef UIP_FALLBACK_INTERFACE
-#define UIP_FALLBACK_INTERFACE ip64_uip_fallback_interface
-#endif
-#endif /* WITH_IP64 */
-
-/*---------------------------------------------------------------------------*/
-/* define ticks/second for slow and fast clocks. Notice that these should be a
-  power of two, eg 64,128,256,512 etc, for efficiency as POT's can be optimized
-  well. */
-#define CLOCK_CONF_SECOND             512
-#define RELOAD_VALUE        ((F_CPU/CLOCK_CONF_SECOND) - 1)
-
-/* One tick: 62.5 ms */
-
-#define RTIMER_CLOCK_LT(a,b)     ((signed short)((a)-(b)) < 0)
-/*---------------------------------------------------------------------------*/
-typedef unsigned long clock_time_t;
-typedef unsigned long long rtimer_clock_t;
-/*---------------------------------------------------------------------------*/
-#define CC_CONF_REGISTER_ARGS          0
-#define CC_CONF_FUNCTION_POINTER_ARGS  1
-#define CC_CONF_FASTCALL
-#define CC_CONF_VA_ARGS                1
-#define CC_CONF_INLINE                 inline
-
-#define CCIF
-#define CLIF
-/*---------------------------------------------------------------------------*/
-typedef uint8_t         u8_t;
-typedef uint16_t        u16_t;
-typedef uint32_t        u32_t;
-typedef  int32_t        s32_t;
-typedef unsigned short  uip_stats_t;
-/*---------------------------------------------------------------------------*/
-#define MULTICHAN_CONF_SET_CHANNEL(x)
-#define MULTICHAN_CONF_READ_RSSI(x) 0
-/*---------------------------------------------------------------------------*/
-#endif//USE_STM32F4XX_NUCLEO
-
-#endif /* __PLATFORM_CONF_H__ */
-/*---------------------------------------------------------------------------*/
-/**
- * @}
- * @}
- */
+/**
+******************************************************************************
+* @file    platform/stm32nucleo-spirit1/platform-conf.h
+* @author  System LAB 
+* @version V1.0.0
+* @date    17-May-2015
+* @brief   Configuration parameters
+******************************************************************************
+* @attention
+*
+* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*   1. Redistributions of source code must retain the above copyright notice,
+*      this list of conditions and the following disclaimer.
+*   2. Redistributions in binary form must reproduce the above copyright notice,
+*      this list of conditions and the following disclaimer in the documentation
+*      and/or other materials provided with the distribution.
+*   3. Neither the name of STMicroelectronics nor the names of its contributors
+*      may be used to endorse or promote products derived from this software
+*      without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup stm32nucleo-spirit1
+ * @{
+ *
+ * \defgroup stm32nucleo-spirit1-peripherals User Button on STM32 Nucleo
+ *
+ * Defines some of the platforms capabilities
+ * @{
+ *
+ * \file
+ * Header file for the stm32nucleo-spirit1 platform configuration
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef __PLATFORM_CONF_H__
+#define __PLATFORM_CONF_H__
+/*---------------------------------------------------------------------------*/
+#ifdef USE_STM32L1XX_NUCLEO
+#include <inttypes.h>
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+#define PLATFORM_HAS_LEDS 1
+#define PLATFORM_HAS_BUTTON 1
+#define PLATFORM_HAS_RADIO 1
+
+#define LEDS_GREEN  1 /*Nucleo LED*/
+#define LEDS_RED    2 /*SPIRIT1 LED*/
+
+#ifdef COMPILE_SENSORS
+#define LEDS_CONF_ALL 1 /*Can't use SPIRIT1 LED in this case*/
+#else
+#define LEDS_CONF_ALL 3 /*No sensors -> we can use SPIRIT1 LED in this case*/
+#endif /*COMPILE_SENSORS*/
+/*---------------------------------------------------------------------------*/
+#define F_CPU                   32000000ul
+#define RTIMER_ARCH_SECOND              32768   
+#define PRESCALER       ((F_CPU / (RTIMER_ARCH_SECOND*2)))
+
+#define UART1_CONF_TX_WITH_INTERRUPT        0
+#define WITH_SERIAL_LINE_INPUT              1
+#define TELNETD_CONF_NUMLINES               6
+#define NETSTACK_CONF_RADIO                 spirit_radio_driver
+#define NETSTACK_RADIO_MAX_PAYLOAD_LEN      96 /* spirit1-config.h */
+
+#if WITH_IP64
+#include "ip64-conf.h"
+#define WITH_SLIP 1
+#ifndef UIP_FALLBACK_INTERFACE
+#define UIP_FALLBACK_INTERFACE ip64_uip_fallback_interface
+#endif
+#endif /* WITH_IP64 */
+
+/*---------------------------------------------------------------------------*/
+/* define ticks/second for slow and fast clocks. Notice that these should be a
+  power of two, eg 64,128,256,512 etc, for efficiency as POT's can be optimized
+  well. */
+#define CLOCK_CONF_SECOND             128
+#define RELOAD_VALUE        ((F_CPU/CLOCK_CONF_SECOND) - 1)
+/* One tick: 62.5 ms */
+
+#define RTIMER_CLOCK_LT(a,b)     ((signed short)((a)-(b)) < 0)
+/*---------------------------------------------------------------------------*/
+typedef unsigned long clock_time_t;     
+typedef unsigned long long rtimer_clock_t; 
+/*---------------------------------------------------------------------------*/
+#define CC_CONF_REGISTER_ARGS          0
+#define CC_CONF_FUNCTION_POINTER_ARGS  1
+#define CC_CONF_FASTCALL
+#define CC_CONF_VA_ARGS                1
+#define CC_CONF_INLINE                 inline
+
+#define CCIF
+#define CLIF
+/*---------------------------------------------------------------------------*/
+typedef uint8_t         u8_t;
+typedef uint16_t        u16_t;
+typedef uint32_t        u32_t;
+typedef  int32_t        s32_t;
+typedef unsigned short  uip_stats_t;
+/*---------------------------------------------------------------------------*/
+#define MULTICHAN_CONF_SET_CHANNEL(x)
+#define MULTICHAN_CONF_READ_RSSI(x) 0
+/*---------------------------------------------------------------------------*/
+#endif//USE_STM32L1XX_NUCLEO
+
+#ifdef USE_STM32F4XX_NUCLEO
+#include <inttypes.h>
+#include <string.h>
+#include "main.h"
+/*---------------------------------------------------------------------------*/
+#define PLATFORM_HAS_LEDS 1
+#define PLATFORM_HAS_BUTTON 1
+#define PLATFORM_HAS_RADIO 1
+
+#define LEDS_GREEN  1 /*Nucleo LED*/
+#define LEDS_RED    2 /*SPIRIT1 LED*/
+
+#ifdef COMPILE_SENSORS
+#define LEDS_CONF_ALL 1 /*Can't use SPIRIT1 LED in this case*/
+#else
+#define LEDS_CONF_ALL 3 /*No sensors -> we can use SPIRIT1 LED in this case*/
+#endif /*COMPILE_SENSORS*/
+/*---------------------------------------------------------------------------*/
+#define F_CPU                   	84000000ul
+#define RTIMER_ARCH_SECOND          96000//32678
+//#define PRESCALER       			uwPrescalerValue
+
+#define UART1_CONF_TX_WITH_INTERRUPT        0
+#define WITH_SERIAL_LINE_INPUT              1
+#define TELNETD_CONF_NUMLINES               6
+#define NETSTACK_CONF_RADIO                 spirit_radio_driver
+#define NETSTACK_RADIO_MAX_PAYLOAD_LEN      96 /* spirit1-config.h */
+
+#if WITH_IP64
+#include "ip64-conf.h"
+#define WITH_SLIP 1
+#ifndef UIP_FALLBACK_INTERFACE
+#define UIP_FALLBACK_INTERFACE ip64_uip_fallback_interface
+#endif
+#endif /* WITH_IP64 */
+
+/*---------------------------------------------------------------------------*/
+/* define ticks/second for slow and fast clocks. Notice that these should be a
+  power of two, eg 64,128,256,512 etc, for efficiency as POT's can be optimized
+  well. */
+#define CLOCK_CONF_SECOND             512
+#define RELOAD_VALUE        ((F_CPU/CLOCK_CONF_SECOND) - 1)
+
+/* One tick: 62.5 ms */
+
+#define RTIMER_CLOCK_LT(a,b)     ((signed short)((a)-(b)) < 0)
+/*---------------------------------------------------------------------------*/
+typedef unsigned long clock_time_t;
+typedef unsigned long long rtimer_clock_t;
+/*---------------------------------------------------------------------------*/
+#define CC_CONF_REGISTER_ARGS          0
+#define CC_CONF_FUNCTION_POINTER_ARGS  1
+#define CC_CONF_FASTCALL
+#define CC_CONF_VA_ARGS                1
+#define CC_CONF_INLINE                 inline
+
+#define CCIF
+#define CLIF
+/*---------------------------------------------------------------------------*/
+typedef uint8_t         u8_t;
+typedef uint16_t        u16_t;
+typedef uint32_t        u32_t;
+typedef  int32_t        s32_t;
+typedef unsigned short  uip_stats_t;
+/*---------------------------------------------------------------------------*/
+#define MULTICHAN_CONF_SET_CHANNEL(x)
+#define MULTICHAN_CONF_READ_RSSI(x) 0
+/*---------------------------------------------------------------------------*/
+#endif//USE_STM32F4XX_NUCLEO
+
+#endif /* __PLATFORM_CONF_H__ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */