ST / stm-spirit1-rf-driver

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: source/libs/Contiki_STM32_Library/hw-config.h

Revision:
78:65de72417cd3
Parent:
77:a9a9807bf3ed
Child:
81:b16caa776548
--- a/source/libs/Contiki_STM32_Library/hw-config.h	Thu Jan 18 15:07:23 2018 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,125 +0,0 @@
- /**
-  ******************************************************************************
-  * @file    hw-config.h
-  * @author  System LAB 
- * @version V1.0.0
- * @date    17-May-2015
-  * @brief   Header file for Hardware Configuration & Setup
-  ******************************************************************************
-  * @attention
-  *
- * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
-  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-/*---------------------------------------------------------------------------*/
-#ifndef __HW_CONFIG_H
-#define __HW_CONFIG_H
-/*---------------------------------------------------------------------------*/
-#include "stm32l-spirit1-config.h"
-/*---------------------------------------------------------------------------*/
-#define UART_RxBufferSize    512
-/*---------------------------------------------------------------------------*/    
-#define I2Cx                            I2C1
-#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
-#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
-#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 
-/*---------------------------------------------------------------------------*/
-#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
-#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()
-/*---------------------------------------------------------------------------*/
-/* Definition for I2Cx Pins */
-#define I2Cx_SCL_PIN                    GPIO_PIN_8
-#define I2Cx_SCL_GPIO_PORT              GPIOB
-#define I2Cx_SDA_PIN                    GPIO_PIN_9
-#define I2Cx_SDA_GPIO_PORT              GPIOB
-#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1
-
-/* Definition for I2Cx's NVIC */
-#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
-#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
-#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
-#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler
-
-  
-#define I2Cx                            I2C1
-#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
-#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
-#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 
-
-#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
-#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()
-
-/* Definition for I2Cx Pins */
-#define I2Cx_SCL_PIN                    GPIO_PIN_8
-#define I2Cx_SCL_GPIO_PORT              GPIOB
-#define I2Cx_SDA_PIN                    GPIO_PIN_9
-#define I2Cx_SDA_GPIO_PORT              GPIOB
-#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1
-
-/* Definition for I2Cx's NVIC */
-#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
-#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
-#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
-#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler
-
-/* User can use this section to tailor USARTx/UARTx instance used and associated
-   resources */
-/* Definition for USARTx clock resources */
-#define USARTx                           USART2
-#define USARTx_CLK_ENABLE()              __USART2_CLK_ENABLE();
-#define DMAx_CLK_ENABLE()                __DMA1_CLK_ENABLE()
-#define USARTx_RX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()
-#define USARTx_TX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()
-
-#define USARTx_FORCE_RESET()             __USART2_FORCE_RESET()
-#define USARTx_RELEASE_RESET()           __USART2_RELEASE_RESET()
-
-/* Definition for USARTx Pins */
-#define USARTx_TX_PIN                    GPIO_PIN_2
-#define USARTx_TX_GPIO_PORT              GPIOA
-
-#define USARTx_RX_PIN                    GPIO_PIN_3
-#define USARTx_RX_GPIO_PORT              GPIOA
-
-     /* Definition for USARTx's NVIC */
-#define USARTx_IRQn                      USART2_IRQn
-#define USARTx_IRQHandler                USART2_IRQHandler
-
-#define USARTx_TX_AF                     GPIO_AF7_USART2 
-#define USARTx_RX_AF                     GPIO_AF7_USART2
-
-
-  /* Enable sensor mask */
-#define PRESSURE_SENSOR                         0x00000001
-#define TEMPERATURE_SENSOR                      0x00000002
-#define HUMIDITY_SENSOR                         0x00000004
-#define UV_SENSOR                               0x00000008  
-#define ACCELEROMETER_SENSOR                    0x00000010  
-#define GYROSCOPE_SENSOR                        0x00000020
-#define MAGNETIC_SENSOR                         0x00000040      
-/*---------------------------------------------------------------------------*/
-#endif  /*__HW_CONFIG_H*/
-/*---------------------------------------------------------------------------*/