ST / stm-spirit1-rf-driver

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: libs/Contiki_STM32_Library/spirit1-arch.h

Revision:
3:0df38cfb1e53
Parent:
2:45642c5198a2
Child:
4:07537ca85c66
--- a/libs/Contiki_STM32_Library/spirit1-arch.h	Fri Oct 14 10:42:56 2016 +0200
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/*
- * Copyright (c) 2012, STMicroelectronics.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Institute nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * This file is part of the Contiki operating system.
- *
- */
-/*---------------------------------------------------------------------------*/
-#ifndef __SPIRIT1_ARCH_H__
-#define __SPIRIT1_ARCH_H__
-/*---------------------------------------------------------------------------*/
-#include "string.h"
-#include "SPIRIT_Management.h"
-#include "radio_gpio.h"
-#include "radio_spi.h"
-#include "st-lib.h"
-/*---------------------------------------------------------------------------*/
-#define IRQ_ENABLE()             st_lib_radio_gpio_interrupt_cmd(RADIO_GPIO_IRQ,0x0F,0x0F,ENABLE);
-#define IRQ_DISABLE()            st_lib_radio_gpio_interrupt_cmd(RADIO_GPIO_IRQ,0x0F,0x0F,DISABLE); 
-#define spirit_spi_busy()        (!(RADIO_SPI_CS_PORT->IDR & RADIO_SPI_CS_PIN))
-#define SPIRIT1_STATUS()       (spirit1_arch_refresh_status() & SPIRIT1_STATE_STATEBITS)
-/*---------------------------------------------------------------------------*/
-uint16_t spirit1_arch_refresh_status(void);
-/*---------------------------------------------------------------------------*/
-#endif /* __SPIRIT1_ARCH_H__ */