Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4
in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4
- Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5
defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
source/libs/Contiki_STM32_Library/spirit1-config.h@34:edda6a7238ec, 2016-11-22 (annotated)
- Committer:
- Wolfgang Betz
- Date:
- Tue Nov 22 11:40:10 2016 +0100
- Revision:
- 34:edda6a7238ec
- Child:
- 43:a512f909514a
Perform re-naming
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Wolfgang Betz |
34:edda6a7238ec | 1 | /* |
Wolfgang Betz |
34:edda6a7238ec | 2 | * Copyright (c) 2012, STMicroelectronics. |
Wolfgang Betz |
34:edda6a7238ec | 3 | * All rights reserved. |
Wolfgang Betz |
34:edda6a7238ec | 4 | * |
Wolfgang Betz |
34:edda6a7238ec | 5 | * Redistribution and use in source and binary forms, with or without |
Wolfgang Betz |
34:edda6a7238ec | 6 | * modification, are permitted provided that the following conditions |
Wolfgang Betz |
34:edda6a7238ec | 7 | * are met: |
Wolfgang Betz |
34:edda6a7238ec | 8 | * 1. Redistributions of source code must retain the above copyright |
Wolfgang Betz |
34:edda6a7238ec | 9 | * notice, this list of conditions and the following disclaimer. |
Wolfgang Betz |
34:edda6a7238ec | 10 | * 2. Redistributions in binary form must reproduce the above copyright |
Wolfgang Betz |
34:edda6a7238ec | 11 | * notice, this list of conditions and the following disclaimer in the |
Wolfgang Betz |
34:edda6a7238ec | 12 | * documentation and/or other materials provided with the distribution. |
Wolfgang Betz |
34:edda6a7238ec | 13 | * 3. Neither the name of the Institute nor the names of its contributors |
Wolfgang Betz |
34:edda6a7238ec | 14 | * may be used to endorse or promote products derived from this software |
Wolfgang Betz |
34:edda6a7238ec | 15 | * without specific prior written permission. |
Wolfgang Betz |
34:edda6a7238ec | 16 | * |
Wolfgang Betz |
34:edda6a7238ec | 17 | * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND |
Wolfgang Betz |
34:edda6a7238ec | 18 | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
Wolfgang Betz |
34:edda6a7238ec | 19 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
Wolfgang Betz |
34:edda6a7238ec | 20 | * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE |
Wolfgang Betz |
34:edda6a7238ec | 21 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
Wolfgang Betz |
34:edda6a7238ec | 22 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
Wolfgang Betz |
34:edda6a7238ec | 23 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
Wolfgang Betz |
34:edda6a7238ec | 24 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
Wolfgang Betz |
34:edda6a7238ec | 25 | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
Wolfgang Betz |
34:edda6a7238ec | 26 | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
Wolfgang Betz |
34:edda6a7238ec | 27 | * SUCH DAMAGE. |
Wolfgang Betz |
34:edda6a7238ec | 28 | * |
Wolfgang Betz |
34:edda6a7238ec | 29 | * This file is part of the Contiki operating system. |
Wolfgang Betz |
34:edda6a7238ec | 30 | * |
Wolfgang Betz |
34:edda6a7238ec | 31 | */ |
Wolfgang Betz |
34:edda6a7238ec | 32 | /*---------------------------------------------------------------------------*/ |
Wolfgang Betz |
34:edda6a7238ec | 33 | #ifndef __SPIRIT1_CONFIG_H__ |
Wolfgang Betz |
34:edda6a7238ec | 34 | #define __SPIRIT1_CONFIG_H__ |
Wolfgang Betz |
34:edda6a7238ec | 35 | /*---------------------------------------------------------------------------*/ |
Wolfgang Betz |
34:edda6a7238ec | 36 | #include "radio.h" |
Wolfgang Betz |
34:edda6a7238ec | 37 | #include "SPIRIT_Config.h" |
Wolfgang Betz |
34:edda6a7238ec | 38 | #include "spirit1-const.h" |
Wolfgang Betz |
34:edda6a7238ec | 39 | /*---------------------------------------------------------------------------*/ |
Wolfgang Betz |
34:edda6a7238ec | 40 | #define CCA_THRESHOLD -98.0 /* dBm */ |
Wolfgang Betz |
34:edda6a7238ec | 41 | #define XTAL_FREQUENCY 50000000 /* Hz */ |
Wolfgang Betz |
34:edda6a7238ec | 42 | #define SPIRIT_MAX_FIFO_LEN (96) // betzw - WAS: 600 |
Wolfgang Betz |
34:edda6a7238ec | 43 | /*---------------------------------------------------------------------------*/ |
Wolfgang Betz |
34:edda6a7238ec | 44 | |
Wolfgang Betz |
34:edda6a7238ec | 45 | /* Define beyond macro when your network includes a platform - like the K64F from |
Wolfgang Betz |
34:edda6a7238ec | 46 | * Freescale - which suffers from a not yet analyzed (HW) bug in delivering/receiving |
Wolfgang Betz |
34:edda6a7238ec | 47 | * further interrupts by/from Spirit after having reached the RX FIFO threshold and |
Wolfgang Betz |
34:edda6a7238ec | 48 | * elaborated the corresponding 'IRQ_RX_FIFO_ALMOST_FULL' interrupt. |
Wolfgang Betz |
34:edda6a7238ec | 49 | * Furthermore, enable this macro if you want to use CSMA/CA. |
Wolfgang Betz |
34:edda6a7238ec | 50 | * NOTE: this enables just a workaround!!! |
Wolfgang Betz |
34:edda6a7238ec | 51 | */ |
Wolfgang Betz |
34:edda6a7238ec | 52 | #define RX_FIFO_THR_AO_CSMA_WA |
Wolfgang Betz |
34:edda6a7238ec | 53 | |
Wolfgang Betz |
34:edda6a7238ec | 54 | /** |
Wolfgang Betz |
34:edda6a7238ec | 55 | * The MAX_PACKET_LEN is an arbitrary value used to define the two array |
Wolfgang Betz |
34:edda6a7238ec | 56 | * spirit_txbuf and spirit_rxbuf. |
Wolfgang Betz |
34:edda6a7238ec | 57 | * The SPIRIT1 supports with its packet handler a length of 65,535 bytes, |
Wolfgang Betz |
34:edda6a7238ec | 58 | * and in direct mode (without packet handler) there is no limit of data. |
Wolfgang Betz |
34:edda6a7238ec | 59 | */ |
Wolfgang Betz |
34:edda6a7238ec | 60 | #ifdef RX_FIFO_THR_AO_CSMA_WA |
Wolfgang Betz |
34:edda6a7238ec | 61 | #define MAX_PACKET_LEN (SPIRIT_MAX_FIFO_LEN-1) |
Wolfgang Betz |
34:edda6a7238ec | 62 | #else |
Wolfgang Betz |
34:edda6a7238ec | 63 | #define MAX_PACKET_LEN (255) // betzw - WAS: SPIRIT_MAX_FIFO_LEN, but LEN_WIDTH is set to 7 so the variable payload length is from 0 to 255 bytes |
Wolfgang Betz |
34:edda6a7238ec | 64 | #endif |
Wolfgang Betz |
34:edda6a7238ec | 65 | |
Wolfgang Betz |
34:edda6a7238ec | 66 | /*---------------------------------------------------------------------------*/ |
Wolfgang Betz |
34:edda6a7238ec | 67 | /** |
Wolfgang Betz |
34:edda6a7238ec | 68 | * Spirit1 IC version |
Wolfgang Betz |
34:edda6a7238ec | 69 | */ |
Wolfgang Betz |
34:edda6a7238ec | 70 | #define SPIRIT1_VERSION SPIRIT_VERSION_3_0 |
Wolfgang Betz |
34:edda6a7238ec | 71 | /*---------------------------------------------------------------------------*/ |
Wolfgang Betz |
34:edda6a7238ec | 72 | #endif /* __SPIRIT1_CONFIG_H__ */ |
Wolfgang Betz |
34:edda6a7238ec | 73 | /*---------------------------------------------------------------------------*/ |