ST / X_NUCLEO_IHM06A1

Library to handle the X-NUCLEO-IHM06A1 Motor Control Expansion Board based on the STSPIN220 component.

Dependencies:   ST_INTERFACES

Dependents:   HelloWorld_IHM06A1

Fork of X-NUCLEO-IHM06A1 by ST Expansion SW Team

Homepage

Table of Contents

  1. Motor Control Library
  2. Platform compatibility

Motor Control Library

Library to handle the X-NUCLEO-IHM06A1 Motor Control Expansion Board based on the STSPIN220 component.

It features the:

  • Read and write of the device parameters; GPIO, PWM and IRQ configuration; microstepping, direction position, speed, acceleration, deceleration and torque controls
  • Automatic full-step switch management; high impedance or hold stop mode selection; enable and standby management
  • Fault interrupts handling (over current, short-circuit and over temperature)
  • Command locking until the device completes movement

The API allows to easily:

  • perform various positioning, moves and stops
  • get/set or monitor the motor positions
  • set the home position and mark another position
  • get/set the minimum and maximum speed
  • get the current speed
  • get/set the acceleration and deceleration
  • get/set the stop mode (hold, hiz or standby)
  • get/set the torque
  • get/set the torque boost
  • get/set the step mode (up to 1/256)

Platform compatibility

Compatible platforms have been tested with the configurations provided by the HelloWorld_IHM06A1 example.

All wikipages