HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.

Dependencies:   mbed

Fork of HelloWorld_IDS01A5_Program by rosarium pila

mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.

EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1

Revision:
0:2ddc0583bcec
Child:
1:cf2e2f85bf8d
diff -r 000000000000 -r 2ddc0583bcec main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu May 25 16:38:55 2017 +0000
@@ -0,0 +1,163 @@
+/**
+ ******************************************************************************
+ * @file    main.cpp
+ * @author  Rosarium PILA, STMicroelectronics
+ * @version V1.0.0
+ * @date    May 17th, 2017
+ * @brief   mbed HelloWorld P2P example for the STMicroelectronics X-NUCLEO-IDB01A4/5
+ *          Spirit1 Expansion Board
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#include "mbed.h"
+#include "SimpleSpirit1.h"
+
+#define TEST_STR_LEN (32)  //512
+static uint8_t send_buf[TEST_STR_LEN] ={'S','P','I','R','I','T','1',' ','H','E','L','L','O',' ','W','O','R','L','D',' ','P','2','P',' ','D','E','M','O'};
+static uint8_t read_buf[TEST_STR_LEN] ={'0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0'};
+
+#define PCKT_MARGIN (2) //32
+
+//#define SIGNAL_BIT (0x1)                                                      //RPi //Removed OS dependency for mbed classic
+//static osThreadId main_thread_id;                                             //RPi //Removed OS dependency for mbed classic
+
+          
+static SimpleSpirit1 &myspirit = SimpleSpirit1::CreateInstance(D11, D12, D3, D9, D10, D2); //RPi
+bool SIGNAL_BIT = 0; //RPi
+static int curr_len = 0;
+unsigned char myValue = 0;
+
+InterruptIn event(USER_BUTTON);                                                 //RPi //Added interrupt event to give userinterface to send pkt.
+
+static void callback_func(int event) 
+{
+	if(event == SimpleSpirit1::RX_DONE) {
+//		osSignalSet(main_thread_id, SIGNAL_BIT);                        //RPi //Removed OS dependency for mbed classic                
+          SIGNAL_BIT = 1;
+	} else if (event != SimpleSpirit1::TX_DONE) {
+		printf("Got unexpected event %d\r\n", event);
+	} else {
+		printf("TX done!\n\r\n");
+	}
+}
+
+void send_data(void)
+{
+  int cnt = 0;
+  cnt++;
+  if(cnt >= MAX_PACKET_LEN) cnt = 0;
+  
+  printf("\r\n***Sending a packet***\r\nSent string ='%s' (len=%d)\n\r", send_buf, strlen((const char*)send_buf) + 1);  
+  
+  uint32_t before_cca = us_ticker_read();
+  while(myspirit.is_receiving()); // wait for ongoing RX ends
+  uint32_t after_cca = us_ticker_read();
+  
+  curr_len = strlen((const char*)send_buf) + 1;
+  myspirit.send(send_buf, curr_len);
+  uint32_t after_send = us_ticker_read();
+  
+  printf("CCA time: %uus\n", (unsigned int)(after_cca - before_cca));
+  printf("Send time: %uus\n\r", (unsigned int)(after_send - after_cca));
+}
+
+int main() 
+{
+  //	osStatus ret;                                                           //RPi //Removed OS dependency for mbed classic
+
+  unsigned int pckts_fails = 0;
+  unsigned int first_failed_packet = 0;
+  unsigned int last_failed_packet = 0;
+  int validate_cnt = -1;
+  
+  //	main_thread_id = Thread::gettid();                                      //RPi //Removed OS dependency for mbed classic
+  
+  
+  DigitalOut TestLED = D5; //RPi //LED of IDS01A4/5
+  TestLED = 0; //RPi //LED off
+  
+  myspirit.attach_irq_callback(callback_func);
+  
+  myspirit.on();
+  
+  printf("\n**************HelloWorld mbed demo for Spirit1 (X-NUCLEO-IDS01A4/5)**************\r\n");
+  printf("\nPress User Button on one of the two boards to send a packaet to the other and the LED D1 on the receiver X-NUCLEO-IDS01A4/5 should toggle \n\r\n");
+  
+  while(1) 
+  {
+    
+    event.rise(&send_data); //RPi // Added User button interrupt trigger to send data
+    
+    if(SIGNAL_BIT) //RPi //Data pkt received
+    {
+      SIGNAL_BIT = 0; 
+      
+      for(unsigned int flush_count = 0; flush_count < TEST_STR_LEN; flush_count++) read_buf[flush_count] = 0 ;//RPi//clear the read buffer
+      
+      int ret = myspirit.read(read_buf, sizeof(read_buf));
+      
+      myValue = 1 - myValue; //RPi //Toggle LED at the receiver
+      TestLED = myValue;     //RPi //Toggle LED at the receiver
+      
+      if(ret == 0) {
+        printf("\nNothing to read\n\r");
+        continue;
+      }
+      int len = strlen((const char*)read_buf) + 1;
+      if(validate_cnt < 0) {
+        validate_cnt = ret;
+      } else {
+        validate_cnt++;
+        if(validate_cnt > MAX_PACKET_LEN) validate_cnt = 1;
+      }
+
+      if(ret != len) {
+        pckts_fails++;
+        if((ret > (int)(first_failed_packet + PCKT_MARGIN) || (ret < (int)(first_failed_packet - PCKT_MARGIN)))) {
+          first_failed_packet = ret;
+        }
+        last_failed_packet = ret;
+      }
+
+      printf("\r\n***Received a packet***\r\n\rReceived string = '%s' (len=%d) \n\r", read_buf, ret); 
+      printf("RSSI: %f, LQI: %u\r\n", myspirit.get_last_rssi_dbm(), (unsigned int)myspirit.get_last_sqi());
+      printf("Packets failed:\t%d\t(ff=%d, lf=%d)\r\n", pckts_fails, first_failed_packet, last_failed_packet);
+      
+      while(myspirit.is_receiving()); // wait for ongoing RX ends
+    } 
+  }
+  
+  myspirit.off();
+  
+  return 0;
+}
+
+
+