BSP driver for DISCO_L496AG
Dependents: DISCO_L496AG-LCD-prova_1 DISCO_L496AG-LCD-prova_2 DISCO_L496AG-LCD-demo DISCO_L496AG-SRAM-demo
Diff: Drivers/BSP/Components/mfxstm32l152/mfxstm32l152.c
- Revision:
- 0:d83f1c8ca282
- Child:
- 2:106c7b82e064
diff -r 000000000000 -r d83f1c8ca282 Drivers/BSP/Components/mfxstm32l152/mfxstm32l152.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Drivers/BSP/Components/mfxstm32l152/mfxstm32l152.c Mon Mar 26 10:28:18 2018 +0200 @@ -0,0 +1,1584 @@ +/** + ****************************************************************************** + * @file mfxstm32l152.c + * @author MCD Application Team + * @version V2.0.0 + * @date 24-June-2015 + * @brief This file provides a set of functions needed to manage the MFXSTM32L152 + * IO Expander devices. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "mfxstm32l152.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Component + * @{ + */ + +/** @defgroup MFXSTM32L152 + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ + +/** @defgroup MFXSTM32L152_Private_Types_Definitions + * @{ + */ + +/* Private define ------------------------------------------------------------*/ + +/** @defgroup MFXSTM32L152_Private_Defines + * @{ + */ +#define MFXSTM32L152_MAX_INSTANCE 3 + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup MFXSTM32L152_Private_Macros + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ + +/** @defgroup MFXSTM32L152_Private_Variables + * @{ + */ + +/* Touch screen driver structure initialization */ +TS_DrvTypeDef mfxstm32l152_ts_drv = +{ + mfxstm32l152_Init, + mfxstm32l152_ReadID, + mfxstm32l152_Reset, + + mfxstm32l152_TS_Start, + mfxstm32l152_TS_DetectTouch, + mfxstm32l152_TS_GetXY, + + mfxstm32l152_TS_EnableIT, + mfxstm32l152_TS_ClearIT, + mfxstm32l152_TS_ITStatus, + mfxstm32l152_TS_DisableIT, +}; + +/* IO driver structure initialization */ +IO_DrvTypeDef mfxstm32l152_io_drv = +{ + mfxstm32l152_Init, + mfxstm32l152_ReadID, + mfxstm32l152_Reset, + + mfxstm32l152_IO_Start, + mfxstm32l152_IO_Config, + mfxstm32l152_IO_WritePin, + mfxstm32l152_IO_ReadPin, + + mfxstm32l152_IO_EnableIT, + mfxstm32l152_IO_DisableIT, + mfxstm32l152_IO_ITStatus, + mfxstm32l152_IO_ClearIT, +}; + +/* IDD driver structure initialization */ +IDD_DrvTypeDef mfxstm32l152_idd_drv = +{ + mfxstm32l152_Init, + mfxstm32l152_DeInit, + mfxstm32l152_ReadID, + mfxstm32l152_Reset, + mfxstm32l152_LowPower, + mfxstm32l152_WakeUp, + + mfxstm32l152_IDD_Start, + mfxstm32l152_IDD_Config, + mfxstm32l152_IDD_GetValue, + + mfxstm32l152_IDD_EnableIT, + mfxstm32l152_IDD_ClearIT, + mfxstm32l152_IDD_GetITStatus, + mfxstm32l152_IDD_DisableIT, + + mfxstm32l152_Error_EnableIT, + mfxstm32l152_Error_ClearIT, + mfxstm32l152_Error_GetITStatus, + mfxstm32l152_Error_DisableIT, + mfxstm32l152_Error_ReadSrc, + mfxstm32l152_Error_ReadMsg +}; + + +/* mfxstm32l152 instances by address */ +uint8_t mfxstm32l152[MFXSTM32L152_MAX_INSTANCE] = {0}; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup MFXSTM32L152_Private_Function_Prototypes + * @{ + */ +static uint8_t mfxstm32l152_GetInstance(uint16_t DeviceAddr); +static uint8_t mfxstm32l152_ReleaseInstance(uint16_t DeviceAddr); +static void mfxstm32l152_reg24_setPinValue(uint16_t DeviceAddr, uint8_t RegisterAddr, uint32_t PinPosition, uint8_t PinValue ); + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup MFXSTM32L152_Private_Functions + * @{ + */ + +/** + * @brief Initialize the mfxstm32l152 and configure the needed hardware resources + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_Init(uint16_t DeviceAddr) +{ + uint8_t instance; + uint8_t empty; + + /* Check if device instance already exists */ + instance = mfxstm32l152_GetInstance(DeviceAddr); + + /* To prevent double initialization */ + if(instance == 0xFF) + { + /* Look for empty instance */ + empty = mfxstm32l152_GetInstance(0); + + if(empty < MFXSTM32L152_MAX_INSTANCE) + { + /* Register the current device instance */ + mfxstm32l152[empty] = DeviceAddr; + + /* Initialize IO BUS layer */ + MFX_IO_Init(); + } + } + + mfxstm32l152_SetIrqOutPinPolarity(DeviceAddr, MFXSTM32L152_OUT_PIN_POLARITY_HIGH); + mfxstm32l152_SetIrqOutPinType(DeviceAddr, MFXSTM32L152_OUT_PIN_TYPE_PUSHPULL); +} + +/** + * @brief DeInitialize the mfxstm32l152 and unconfigure the needed hardware resources + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_DeInit(uint16_t DeviceAddr) +{ + uint8_t instance; + + /* release existing instance */ + instance = mfxstm32l152_ReleaseInstance(DeviceAddr); + + /* De-Init only if instance was previously registered */ + if(instance != 0xFF) + { + /* De-Initialize IO BUS layer */ + MFX_IO_DeInit(); + } +} + +/** + * @brief Reset the mfxstm32l152 by Software. + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_Reset(uint16_t DeviceAddr) +{ + /* Soft Reset */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL, MFXSTM32L152_SWRST); + + /* Wait for a delay to ensure registers erasing */ + MFX_IO_Delay(10); +} + +/** + * @brief Put mfxstm32l152 Device in Low Power standby mode + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_LowPower(uint16_t DeviceAddr) +{ + /* Enter standby mode */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL, MFXSTM32L152_STANDBY); + + /* enable wakeup pin */ + MFX_IO_EnableWakeupPin(); +} + +/** + * @brief WakeUp mfxstm32l152 from standby mode + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_WakeUp(uint16_t DeviceAddr) +{ + uint8_t instance; + + /* Check if device instance already exists */ + instance = mfxstm32l152_GetInstance(DeviceAddr); + + /* if instance does not exist, first initialize pins*/ + if(instance == 0xFF) + { + /* enable wakeup pin */ + MFX_IO_EnableWakeupPin(); + } + + /* toggle wakeup pin */ + MFX_IO_Wakeup(); +} + +/** + * @brief Read the MFXSTM32L152 IO Expander device ID. + * @param DeviceAddr: Device address on communication Bus. + * @retval The Device ID (two bytes). + */ +uint16_t mfxstm32l152_ReadID(uint16_t DeviceAddr) +{ + uint8_t id; + + /* Wait for a delay to ensure the state of registers */ + MFX_IO_Delay(1); + + /* Initialize IO BUS layer */ + MFX_IO_Init(); + + id = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_ID); + + /* Return the device ID value */ + return (id); +} + +/** + * @brief Read the MFXSTM32L152 device firmware version. + * @param DeviceAddr: Device address on communication Bus. + * @retval The Device FW version (two bytes). + */ +uint16_t mfxstm32l152_ReadFwVersion(uint16_t DeviceAddr) +{ + uint8_t data[2]; + + MFX_IO_ReadMultiple((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_FW_VERSION_MSB, data, sizeof(data)) ; + + /* Recompose MFX firmware value */ + return ((data[0] << 8) | data[1]); +} + +/** + * @brief Enable the interrupt mode for the selected IT source + * @param DeviceAddr: Device address on communication Bus. + * @param Source: The interrupt source to be configured, could be: + * @arg MFXSTM32L152_IRQ_GPIO: IO interrupt + * @arg MFXSTM32L152_IRQ_IDD : IDD interrupt + * @arg MFXSTM32L152_IRQ_ERROR : Error interrupt + * @arg MFXSTM32L152_IRQ_TS_DET : Touch Screen Controller Touch Detected interrupt + * @arg MFXSTM32L152_IRQ_TS_NE : Touch Screen FIFO Not Empty + * @arg MFXSTM32L152_IRQ_TS_TH : Touch Screen FIFO threshold triggered + * @arg MFXSTM32L152_IRQ_TS_FULL : Touch Screen FIFO Full + * @arg MFXSTM32L152_IRQ_TS_OVF : Touch Screen FIFO Overflow + * @retval None + */ +void mfxstm32l152_EnableITSource(uint16_t DeviceAddr, uint8_t Source) +{ + uint8_t tmp = 0; + + /* Get the current value of the INT_EN register */ + tmp = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_SRC_EN); + + /* Set the interrupts to be Enabled */ + tmp |= Source; + + /* Set the register */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_SRC_EN, tmp); +} + +/** + * @brief Disable the interrupt mode for the selected IT source + * @param DeviceAddr: Device address on communication Bus. + * @param Source: The interrupt source to be configured, could be: + * @arg MFXSTM32L152_IRQ_GPIO: IO interrupt + * @arg MFXSTM32L152_IRQ_IDD : IDD interrupt + * @arg MFXSTM32L152_IRQ_ERROR : Error interrupt + * @arg MFXSTM32L152_IRQ_TS_DET : Touch Screen Controller Touch Detected interrupt + * @arg MFXSTM32L152_IRQ_TS_NE : Touch Screen FIFO Not Empty + * @arg MFXSTM32L152_IRQ_TS_TH : Touch Screen FIFO threshold triggered + * @arg MFXSTM32L152_IRQ_TS_FULL : Touch Screen FIFO Full + * @arg MFXSTM32L152_IRQ_TS_OVF : Touch Screen FIFO Overflow + * @retval None + */ +void mfxstm32l152_DisableITSource(uint16_t DeviceAddr, uint8_t Source) +{ + uint8_t tmp = 0; + + /* Get the current value of the INT_EN register */ + tmp = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_SRC_EN); + + /* Set the interrupts to be Enabled */ + tmp &= ~Source; + + /* Set the register */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_SRC_EN, tmp); +} + + +/** + * @brief Returns the selected Global interrupt source pending bit value + * @param DeviceAddr: Device address on communication Bus. + * @param Source: the Global interrupt source to be checked, could be: + * @arg MFXSTM32L152_IRQ_GPIO: IO interrupt + * @arg MFXSTM32L152_IRQ_IDD : IDD interrupt + * @arg MFXSTM32L152_IRQ_ERROR : Error interrupt + * @arg MFXSTM32L152_IRQ_TS_DET : Touch Screen Controller Touch Detected interrupt + * @arg MFXSTM32L152_IRQ_TS_NE : Touch Screen FIFO Not Empty + * @arg MFXSTM32L152_IRQ_TS_TH : Touch Screen FIFO threshold triggered + * @arg MFXSTM32L152_IRQ_TS_FULL : Touch Screen FIFO Full + * @arg MFXSTM32L152_IRQ_TS_OVF : Touch Screen FIFO Overflow + * @retval The value of the checked Global interrupt source status. + */ +uint8_t mfxstm32l152_GlobalITStatus(uint16_t DeviceAddr, uint8_t Source) +{ + /* Return the global IT source status (pending or not)*/ + return((MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_PENDING) & Source)); +} + +/** + * @brief Clear the selected Global interrupt pending bit(s) + * @param DeviceAddr: Device address on communication Bus. + * @param Source: the Global interrupt source to be cleared, could be any combination + * of the below values. The acknowledge signal for MFXSTM32L152_GPIOs configured in input + * with interrupt is not on this register but in IRQ_GPI_ACK1, IRQ_GPI_ACK2 registers. + * @arg MFXSTM32L152_IRQ_IDD : IDD interrupt + * @arg MFXSTM32L152_IRQ_ERROR : Error interrupt + * @arg MFXSTM32L152_IRQ_TS_DET : Touch Screen Controller Touch Detected interrupt + * @arg MFXSTM32L152_IRQ_TS_NE : Touch Screen FIFO Not Empty + * @arg MFXSTM32L152_IRQ_TS_TH : Touch Screen FIFO threshold triggered + * @arg MFXSTM32L152_IRQ_TS_FULL : Touch Screen FIFO Full + * @arg MFXSTM32L152_IRQ_TS_OVF : Touch Screen FIFO Overflow + * /\/\ IMPORTANT NOTE /\/\ must not use MFXSTM32L152_IRQ_GPIO as argument, see IRQ_GPI_ACK1 and IRQ_GPI_ACK2 registers + * @retval None + */ +void mfxstm32l152_ClearGlobalIT(uint16_t DeviceAddr, uint8_t Source) +{ + /* Write 1 to the bits that have to be cleared */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_ACK, Source); +} + +/** + * @brief Set the global interrupt Polarity of IRQ_OUT_PIN. + * @param DeviceAddr: Device address on communication Bus. + * @param Polarity: the IT mode polarity, could be one of the following values: + * @arg MFXSTM32L152_OUT_PIN_POLARITY_LOW: Interrupt output line is active Low edge + * @arg MFXSTM32L152_OUT_PIN_POLARITY_HIGH: Interrupt line output is active High edge + * @retval None + */ +void mfxstm32l152_SetIrqOutPinPolarity(uint16_t DeviceAddr, uint8_t Polarity) +{ + uint8_t tmp = 0; + + /* Get the current register value */ + tmp = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_MFX_IRQ_OUT); + + /* Mask the polarity bits */ + tmp &= ~(uint8_t)0x02; + + /* Modify the Interrupt Output line configuration */ + tmp |= Polarity; + + /* Set the new register value */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_MFX_IRQ_OUT, tmp); + + /* Wait for 1 ms for MFX to change IRQ_out pin config, before activate it */ + MFX_IO_Delay(1); + +} + +/** + * @brief Set the global interrupt Type of IRQ_OUT_PIN. + * @param DeviceAddr: Device address on communication Bus. + * @param Type: Interrupt line activity type, could be one of the following values: + * @arg MFXSTM32L152_OUT_PIN_TYPE_OPENDRAIN: Open Drain output Interrupt line + * @arg MFXSTM32L152_OUT_PIN_TYPE_PUSHPULL: Push Pull output Interrupt line + * @retval None + */ +void mfxstm32l152_SetIrqOutPinType(uint16_t DeviceAddr, uint8_t Type) +{ + uint8_t tmp = 0; + + /* Get the current register value */ + tmp = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_MFX_IRQ_OUT); + + /* Mask the type bits */ + tmp &= ~(uint8_t)0x01; + + /* Modify the Interrupt Output line configuration */ + tmp |= Type; + + /* Set the new register value */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_MFX_IRQ_OUT, tmp); + + /* Wait for 1 ms for MFX to change IRQ_out pin config, before activate it */ + MFX_IO_Delay(1); + +} + + +/* ------------------------------------------------------------------ */ +/* ----------------------- GPIO ------------------------------------- */ +/* ------------------------------------------------------------------ */ + + +/** + * @brief Start the IO functionality used and enable the AF for selected IO pin(s). + * @param DeviceAddr: Device address on communication Bus. + * @param AF_en: 0 to disable, else enabled. + * @retval None + */ +void mfxstm32l152_IO_Start(uint16_t DeviceAddr, uint32_t IO_Pin) +{ + uint8_t mode; + + /* Get the current register value */ + mode = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL); + + /* Set the IO Functionalities to be Enabled */ + mode |= MFXSTM32L152_GPIO_EN; + + /* Enable ALTERNATE functions */ + /* AGPIO[0..3] can be either IDD or GPIO */ + /* AGPIO[4..7] can be either TS or GPIO */ + /* if IDD or TS are enabled no matter the value this bit GPIO are not available for those pins */ + /* however the MFX will waste some cycles to to handle these potential GPIO (pooling, etc) */ + /* so if IDD and TS are both active it is better to let ALTERNATE off (0) */ + /* if however IDD or TS are not connected then set it on gives more GPIOs availability */ + /* remind that AGPIO are less efficient then normal GPIO (They use pooling rather then EXTI */ + if (IO_Pin > 0xFFFF) + { + mode |= MFXSTM32L152_ALTERNATE_GPIO_EN; + } + else + { + mode &= ~MFXSTM32L152_ALTERNATE_GPIO_EN; + } + + /* Write the new register value */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL, mode); + + /* Wait for 1 ms for MFX to change IRQ_out pin config, before activate it */ + MFX_IO_Delay(1); +} + +/** + * @brief Configures the IO pin(s) according to IO mode structure value. + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The output pin to be set or reset. This parameter can be one + * of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: where x can be from 0 to 23. + * @param IO_Mode: The IO pin mode to configure, could be one of the following values: + * @arg IO_MODE_INPUT + * @arg IO_MODE_OUTPUT + * @arg IO_MODE_IT_RISING_EDGE + * @arg IO_MODE_IT_FALLING_EDGE + * @arg IO_MODE_IT_LOW_LEVEL + * @arg IO_MODE_IT_HIGH_LEVEL + * @arg IO_MODE_INPUT_PU, + * @arg IO_MODE_INPUT_PD, + * @arg IO_MODE_OUTPUT_OD_PU, + * @arg IO_MODE_OUTPUT_OD_PD, + * @arg IO_MODE_OUTPUT_PP_PU, + * @arg IO_MODE_OUTPUT_PP_PD, + * @arg IO_MODE_IT_RISING_EDGE_PU + * @arg IO_MODE_IT_FALLING_EDGE_PU + * @arg IO_MODE_IT_LOW_LEVEL_PU + * @arg IO_MODE_IT_HIGH_LEVEL_PU + * @arg IO_MODE_IT_RISING_EDGE_PD + * @arg IO_MODE_IT_FALLING_EDGE_PD + * @arg IO_MODE_IT_LOW_LEVEL_PD + * @arg IO_MODE_IT_HIGH_LEVEL_PD + * @retval None + */ +uint8_t mfxstm32l152_IO_Config(uint16_t DeviceAddr, uint32_t IO_Pin, IO_ModeTypedef IO_Mode) +{ + uint8_t error_code = 0; + + /* Configure IO pin according to selected IO mode */ + switch(IO_Mode) + { + case IO_MODE_OFF: /* Off or analog mode */ + case IO_MODE_ANALOG: /* Off or analog mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITHOUT_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + break; + + case IO_MODE_INPUT: /* Input mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITHOUT_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + break; + + case IO_MODE_INPUT_PU: /* Input mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + break; + + case IO_MODE_INPUT_PD: /* Input mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + break; + + case IO_MODE_OUTPUT: /* Output mode */ + case IO_MODE_OUTPUT_PP_PD: /* Output mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_OUT); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPO_PUSH_PULL); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + break; + + case IO_MODE_OUTPUT_PP_PU: /* Output mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_OUT); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPO_PUSH_PULL); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + break; + + case IO_MODE_OUTPUT_OD_PD: /* Output mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_OUT); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPO_OPEN_DRAIN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + break; + + case IO_MODE_OUTPUT_OD_PU: /* Output mode */ + mfxstm32l152_IO_DisablePinIT(DeviceAddr, IO_Pin); /* first disable IT */ + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_OUT); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPO_OPEN_DRAIN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + break; + + case IO_MODE_IT_RISING_EDGE: /* Interrupt rising edge mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITHOUT_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_EDGE); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_HLRE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_RISING_EDGE_PU: /* Interrupt rising edge mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_EDGE); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_HLRE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_RISING_EDGE_PD: /* Interrupt rising edge mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_EDGE); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_HLRE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_FALLING_EDGE: /* Interrupt falling edge mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITHOUT_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_EDGE); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_LLFE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_FALLING_EDGE_PU: /* Interrupt falling edge mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_EDGE); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_LLFE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_FALLING_EDGE_PD: /* Interrupt falling edge mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_EDGE); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_LLFE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_LOW_LEVEL: /* Low level interrupt mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITHOUT_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_LEVEL); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_LLFE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_LOW_LEVEL_PU: /* Low level interrupt mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_LEVEL); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_LLFE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_LOW_LEVEL_PD: /* Low level interrupt mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_LEVEL); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_LLFE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_HIGH_LEVEL: /* High level interrupt mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITHOUT_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_LEVEL); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_HLRE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_HIGH_LEVEL_PU: /* High level interrupt mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_UP); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_LEVEL); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_HLRE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + case IO_MODE_IT_HIGH_LEVEL_PD: /* High level interrupt mode */ + mfxstm32l152_IO_EnableIT(DeviceAddr); + mfxstm32l152_IO_InitPin(DeviceAddr, IO_Pin, MFXSTM32L152_GPIO_DIR_IN); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_TYPE1, IO_Pin, MFXSTM32L152_GPI_WITH_PULL_RESISTOR); + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_PUPD1, IO_Pin, MFXSTM32L152_GPIO_PULL_DOWN); + mfxstm32l152_IO_SetIrqEvtMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_EVT_LEVEL); + mfxstm32l152_IO_SetIrqTypeMode(DeviceAddr, IO_Pin, MFXSTM32L152_IRQ_GPI_TYPE_HLRE); + mfxstm32l152_IO_EnablePinIT(DeviceAddr, IO_Pin); /* last to do: enable IT */ + break; + + default: + error_code = (uint8_t) IO_Mode; + break; + } + + return error_code; +} + +/** + * @brief Initialize the selected IO pin direction. + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The IO pin to be configured. This parameter could be any + * combination of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: Where x can be from 0 to 23. + * @param Direction: could be MFXSTM32L152_GPIO_DIR_IN or MFXSTM32L152_GPIO_DIR_OUT. + * @retval None + */ +void mfxstm32l152_IO_InitPin(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t Direction) +{ + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_DIR1, IO_Pin, Direction); +} + +/** + * @brief Set the global interrupt Type. + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The IO pin to be configured. This parameter could be any + * combination of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: Where x can be from 0 to 23. + * @param Evt: Interrupt line activity type, could be one of the following values: + * @arg MFXSTM32L152_IRQ_GPI_EVT_LEVEL: Interrupt line is active in level model + * @arg MFXSTM32L152_IRQ_GPI_EVT_EDGE: Interrupt line is active in edge model + * @retval None + */ +void mfxstm32l152_IO_SetIrqEvtMode(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t Evt) +{ + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_EVT1, IO_Pin, Evt); + MFX_IO_Delay(1); +} + +/** + * @brief Configure the Edge for which a transition is detectable for the + * selected pin. + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The IO pin to be configured. This parameter could be any + * combination of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: Where x can be from 0 to 23. + * @param Evt: Interrupt line activity type, could be one of the following values: + * @arg MFXSTM32L152_IRQ_GPI_TYPE_LLFE: Interrupt line is active in Low Level or Falling Edge + * @arg MFXSTM32L152_IRQ_GPI_TYPE_HLRE: Interrupt line is active in High Level or Rising Edge + * @retval None + */ +void mfxstm32l152_IO_SetIrqTypeMode(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t Type) +{ + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_TYPE1, IO_Pin, Type); + MFX_IO_Delay(1); +} + +/** + * @brief When GPIO is in output mode, puts the corresponding GPO in High (1) or Low (0) level. + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The output pin to be set or reset. This parameter can be one + * of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: where x can be from 0 to 23. + * @param PinState: The new IO pin state. + * @retval None + */ +void mfxstm32l152_IO_WritePin(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t PinState) +{ + /* Apply the bit value to the selected pin */ + if (PinState != 0) + { + /* Set the SET register */ + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPO_SET1, IO_Pin, 1); + } + else + { + /* Set the CLEAR register */ + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_GPO_CLR1, IO_Pin, 1); + } +} + +/** + * @brief Return the state of the selected IO pin(s). + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The output pin to be set or reset. This parameter can be one + * of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: where x can be from 0 to 23. + * @retval IO pin(s) state. + */ +uint32_t mfxstm32l152_IO_ReadPin(uint16_t DeviceAddr, uint32_t IO_Pin) +{ + uint8_t tmp1; + uint16_t tmp2; + uint32_t tmp3; + + tmp1 = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_STATE1); + tmp2 = (uint16_t) MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_STATE2); + tmp3 = (uint32_t) MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_GPIO_STATE3); + tmp3 = tmp1 + (tmp2 << 8) + (tmp3 << 16); + + return(tmp3 & IO_Pin); +} + +/** + * @brief Enable the global IO interrupt source. + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_IO_EnableIT(uint16_t DeviceAddr) +{ + MFX_IO_ITConfig(); + + /* Enable global IO IT source */ + mfxstm32l152_EnableITSource(DeviceAddr, MFXSTM32L152_IRQ_GPIO); +} + +/** + * @brief Disable the global IO interrupt source. + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_IO_DisableIT(uint16_t DeviceAddr) +{ + /* Disable global IO IT source */ + mfxstm32l152_DisableITSource(DeviceAddr, MFXSTM32L152_IRQ_GPIO); +} + +/** + * @brief Enable interrupt mode for the selected IO pin(s). + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The IO interrupt to be enabled. This parameter could be any + * combination of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: where x can be from 0 to 23. + * @retval None + */ +void mfxstm32l152_IO_EnablePinIT(uint16_t DeviceAddr, uint32_t IO_Pin) +{ + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_SRC1, IO_Pin, 1); +} + +/** + * @brief Disable interrupt mode for the selected IO pin(s). + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The IO interrupt to be disabled. This parameter could be any + * combination of the following values: + * @arg MFXSTM32L152_GPIO_PIN_x: where x can be from 0 to 23. + * @retval None + */ +void mfxstm32l152_IO_DisablePinIT(uint16_t DeviceAddr, uint32_t IO_Pin) +{ + mfxstm32l152_reg24_setPinValue(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_SRC1, IO_Pin, 0); +} + + +/** + * @brief Check the status of the selected IO interrupt pending bit + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: The IO interrupt to be checked could be: + * @arg MFXSTM32L152_GPIO_PIN_x Where x can be from 0 to 23. + * @retval Status of the checked IO pin(s). + */ +uint32_t mfxstm32l152_IO_ITStatus(uint16_t DeviceAddr, uint32_t IO_Pin) +{ + /* Get the Interrupt status */ + uint8_t tmp1; + uint16_t tmp2; + uint32_t tmp3; + + tmp1 = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_PENDING1); + tmp2 = (uint16_t) MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_PENDING2); + tmp3 = (uint32_t) MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_PENDING3); + tmp3 = tmp1 + (tmp2 << 8) + (tmp3 << 16); + + return(tmp3 & IO_Pin); +} + +/** + * @brief Clear the selected IO interrupt pending bit(s). It clear automatically also the general MFXSTM32L152_REG_ADR_IRQ_PENDING + * @param DeviceAddr: Device address on communication Bus. + * @param IO_Pin: the IO interrupt to be cleared, could be: + * @arg MFXSTM32L152_GPIO_PIN_x: Where x can be from 0 to 23. + * @retval None + */ +void mfxstm32l152_IO_ClearIT(uint16_t DeviceAddr, uint32_t IO_Pin) +{ + /* Clear the IO IT pending bit(s) by acknowledging */ + /* it cleans automatically also the Global IRQ_GPIO */ + /* normally this function is called under interrupt */ + uint8_t pin_0_7, pin_8_15, pin_16_23; + + pin_0_7 = IO_Pin & 0x0000ff; + pin_8_15 = IO_Pin >> 8; + pin_8_15 = pin_8_15 & 0x00ff; + pin_16_23 = IO_Pin >> 16; + + if (pin_0_7) + { + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_ACK1, pin_0_7); + } + if (pin_8_15) + { + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_ACK2, pin_8_15); + } + if (pin_16_23) + { + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_IRQ_GPI_ACK3, pin_16_23); + } +} + + +/** + * @brief Enable the AF for aGPIO. + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_IO_EnableAF(uint16_t DeviceAddr) +{ + uint8_t mode; + + /* Get the current register value */ + mode = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL); + + /* Enable ALTERNATE functions */ + /* AGPIO[0..3] can be either IDD or GPIO */ + /* AGPIO[4..7] can be either TS or GPIO */ + /* if IDD or TS are enabled no matter the value this bit GPIO are not available for those pins */ + /* however the MFX will waste some cycles to to handle these potential GPIO (pooling, etc) */ + /* so if IDD and TS are both active it is better to let ALTERNATE disabled (0) */ + /* if however IDD or TS are not connected then set it on gives more GPIOs availability */ + /* remind that AGPIO are less efficient then normal GPIO (they use pooling rather then EXTI) */ + mode |= MFXSTM32L152_ALTERNATE_GPIO_EN; + + /* Write the new register value */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL, mode); +} + +/** + * @brief Disable the AF for aGPIO. + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ + void mfxstm32l152_IO_DisableAF(uint16_t DeviceAddr) +{ + uint8_t mode; + + /* Get the current register value */ + mode = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL); + + /* Enable ALTERNATE functions */ + /* AGPIO[0..3] can be either IDD or GPIO */ + /* AGPIO[4..7] can be either TS or GPIO */ + /* if IDD or TS are enabled no matter the value this bit GPIO are not available for those pins */ + /* however the MFX will waste some cycles to to handle these potential GPIO (pooling, etc) */ + /* so if IDD and TS are both active it is better to let ALTERNATE disabled (0) */ + /* if however IDD or TS are not connected then set it on gives more GPIOs availability */ + /* remind that AGPIO are less efficient then normal GPIO (they use pooling rather then EXTI) */ + mode &= ~MFXSTM32L152_ALTERNATE_GPIO_EN; + + /* Write the new register value */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL, mode); + +} + + +/* ------------------------------------------------------------------ */ +/* --------------------- TOUCH SCREEN ------------------------------- */ +/* ------------------------------------------------------------------ */ + +/** + * @brief Configures the touch Screen Controller (Single point detection) + * @param DeviceAddr: Device address on communication Bus. + * @retval None. + */ +void mfxstm32l152_TS_Start(uint16_t DeviceAddr) +{ + uint8_t mode; + + /* Get the current register value */ + mode = MFX_IO_Read(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL); + + /* Set the Functionalities to be Enabled */ + mode |= MFXSTM32L152_TS_EN; + + /* Set the new register value */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL, mode); + + /* Wait for 2 ms */ + MFX_IO_Delay(2); + + /* Select 2 nF filter capacitor */ + /* Configuration: + - Touch average control : 4 samples + - Touch delay time : 500 uS + - Panel driver setting time: 500 uS + */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_TS_SETTLING, 0x32); + MFX_IO_Write(DeviceAddr, MFXSTM32L152_TS_TOUCH_DET_DELAY, 0x5); + MFX_IO_Write(DeviceAddr, MFXSTM32L152_TS_AVE, 0x04); + + /* Configure the Touch FIFO threshold: single point reading */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_TS_FIFO_TH, 0x01); + + /* Clear the FIFO memory content. */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_TS_FIFO_TH, MFXSTM32L152_TS_CLEAR_FIFO); + + /* Touch screen control configuration : + - No window tracking index + */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_TS_TRACK, 0x00); + + + /* Clear all the IT status pending bits if any */ + mfxstm32l152_IO_ClearIT(DeviceAddr, 0xFFFFFF); + + /* Wait for 1 ms delay */ + MFX_IO_Delay(1); +} + +/** + * @brief Return if there is touch detected or not. + * @param DeviceAddr: Device address on communication Bus. + * @retval Touch detected state. + */ +uint8_t mfxstm32l152_TS_DetectTouch(uint16_t DeviceAddr) +{ + uint8_t state; + uint8_t ret = 0; + + state = MFX_IO_Read(DeviceAddr, MFXSTM32L152_TS_FIFO_STA); + state = ((state & (uint8_t)MFXSTM32L152_TS_CTRL_STATUS) == (uint8_t)MFXSTM32L152_TS_CTRL_STATUS); + + if(state > 0) + { + if(MFX_IO_Read(DeviceAddr, MFXSTM32L152_TS_FIFO_LEVEL) > 0) + { + ret = 1; + } + } + + return ret; +} + +/** + * @brief Get the touch screen X and Y positions values + * @param DeviceAddr: Device address on communication Bus. + * @param X: Pointer to X position value + * @param Y: Pointer to Y position value + * @retval None. + */ +void mfxstm32l152_TS_GetXY(uint16_t DeviceAddr, uint16_t *X, uint16_t *Y) +{ + uint8_t data_xy[3]; + + MFX_IO_ReadMultiple(DeviceAddr, MFXSTM32L152_TS_XY_DATA, data_xy, sizeof(data_xy)) ; + + /* Calculate positions values */ + *X = (data_xy[1]<<4) + (data_xy[0]>>4); + *Y = (data_xy[2]<<4) + (data_xy[0]&4); + + /* Reset the FIFO memory content. */ + MFX_IO_Write(DeviceAddr, MFXSTM32L152_TS_FIFO_TH, MFXSTM32L152_TS_CLEAR_FIFO); +} + +/** + * @brief Configure the selected source to generate a global interrupt or not + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_TS_EnableIT(uint16_t DeviceAddr) +{ + MFX_IO_ITConfig(); + + /* Enable global TS IT source */ + mfxstm32l152_EnableITSource(DeviceAddr, MFXSTM32L152_IRQ_TS_DET); +} + +/** + * @brief Configure the selected source to generate a global interrupt or not + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_TS_DisableIT(uint16_t DeviceAddr) +{ + /* Disable global TS IT source */ + mfxstm32l152_DisableITSource(DeviceAddr, MFXSTM32L152_IRQ_TS_DET); +} + +/** + * @brief Configure the selected source to generate a global interrupt or not + * @param DeviceAddr: Device address on communication Bus. + * @retval TS interrupts status + */ +uint8_t mfxstm32l152_TS_ITStatus(uint16_t DeviceAddr) +{ + /* Return TS interrupts status */ + return(mfxstm32l152_GlobalITStatus(DeviceAddr, MFXSTM32L152_IRQ_TS)); +} + +/** + * @brief Configure the selected source to generate a global interrupt or not + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_TS_ClearIT(uint16_t DeviceAddr) +{ + /* Clear the global TS IT source */ + mfxstm32l152_ClearGlobalIT(DeviceAddr, MFXSTM32L152_IRQ_TS); +} + +/* ------------------------------------------------------------------ */ +/* --------------------- IDD MEASUREMENT ---------------------------- */ +/* ------------------------------------------------------------------ */ + +/** + * @brief Launch IDD current measurement + * @param DeviceAddr: Device address on communication Bus + * @retval None. + */ +void mfxstm32l152_IDD_Start(uint16_t DeviceAddr) +{ + uint8_t mode = 0; + + /* Get the current register value */ + mode = MFX_IO_Read((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_CTRL); + + /* Set the Functionalities to be enabled */ + mode |= MFXSTM32L152_IDD_CTRL_REQ; + + /* Start measurement campaign */ + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_CTRL, mode); +} + +/** + * @brief Configures the IDD current measurement + * @param DeviceAddr: Device address on communication Bus. + * @param MfxIddConfig: Parameters depending on hardware config. + * @retval None + */ +void mfxstm32l152_IDD_Config(uint16_t DeviceAddr, IDD_ConfigTypeDef MfxIddConfig) +{ + uint8_t value = 0; + uint8_t mode = 0; + + /* Get the current register value */ + mode = MFX_IO_Read((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL); + + if((mode & MFXSTM32L152_IDD_EN) != MFXSTM32L152_IDD_EN) + { + /* Set the Functionalities to be enabled */ + mode |= MFXSTM32L152_IDD_EN; + + /* Set the new register value */ + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_SYS_CTRL, mode); + } + + /* Control register setting: number of shunts */ + value = ((MfxIddConfig.ShuntNbUsed << 1) & MFXSTM32L152_IDD_CTRL_SHUNT_NB); + value |= (MfxIddConfig.VrefMeasurement & MFXSTM32L152_IDD_CTRL_VREF_DIS); + value |= (MfxIddConfig.Calibration & MFXSTM32L152_IDD_CTRL_CAL_DIS); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_CTRL, value); + + /* Idd pre delay configuration: unit and value*/ + value = (MfxIddConfig.PreDelayUnit & MFXSTM32L152_IDD_PREDELAY_UNIT) | + (MfxIddConfig.PreDelayValue & MFXSTM32L152_IDD_PREDELAY_VALUE); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_PRE_DELAY, value); + + /* Shunt 0 register value: MSB then LSB */ + value = (uint8_t) (MfxIddConfig.Shunt0Value >> 8); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT0_MSB, value); + value = (uint8_t) (MfxIddConfig.Shunt0Value); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT0_LSB, value); + + /* Shunt 1 register value: MSB then LSB */ + value = (uint8_t) (MfxIddConfig.Shunt1Value >> 8); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT1_MSB, value); + value = (uint8_t) (MfxIddConfig.Shunt1Value); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT1_LSB, value); + + /* Shunt 2 register value: MSB then LSB */ + value = (uint8_t) (MfxIddConfig.Shunt2Value >> 8); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT2_MSB, value); + value = (uint8_t) (MfxIddConfig.Shunt2Value); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT2_LSB, value); + + /* Shunt 3 register value: MSB then LSB */ + value = (uint8_t) (MfxIddConfig.Shunt3Value >> 8); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT3_MSB, value); + value = (uint8_t) (MfxIddConfig.Shunt3Value); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT3_LSB, value); + + /* Shunt 4 register value: MSB then LSB */ + value = (uint8_t) (MfxIddConfig.Shunt4Value >> 8); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT4_MSB, value); + value = (uint8_t) (MfxIddConfig.Shunt4Value); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT4_LSB, value); + + /* Shunt 0 stabilization delay */ + value = MfxIddConfig.Shunt0StabDelay; + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SH0_STABILIZATION, value); + + /* Shunt 1 stabilization delay */ + value = MfxIddConfig.Shunt1StabDelay; + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SH1_STABILIZATION, value); + + /* Shunt 2 stabilization delay */ + value = MfxIddConfig.Shunt2StabDelay; + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SH2_STABILIZATION, value); + + /* Shunt 3 stabilization delay */ + value = MfxIddConfig.Shunt3StabDelay; + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SH3_STABILIZATION, value); + + /* Shunt 4 stabilization delay */ + value = MfxIddConfig.Shunt4StabDelay; + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SH4_STABILIZATION, value); + + /* Idd ampli gain value: MSB then LSB */ + value = (uint8_t) (MfxIddConfig.AmpliGain >> 8); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_GAIN_MSB, value); + value = (uint8_t) (MfxIddConfig.AmpliGain); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_GAIN_LSB, value); + + /* Idd VDD min value: MSB then LSB */ + value = (uint8_t) (MfxIddConfig.VddMin >> 8); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_VDD_MIN_MSB, value); + value = (uint8_t) (MfxIddConfig.VddMin); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_VDD_MIN_LSB, value); + + /* Idd number of measurements */ + value = MfxIddConfig.MeasureNb; + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_NBR_OF_MEAS, value); + + /* Idd delta delay configuration: unit and value */ + value = (MfxIddConfig.DeltaDelayUnit & MFXSTM32L152_IDD_DELTADELAY_UNIT) | + (MfxIddConfig.DeltaDelayValue & MFXSTM32L152_IDD_DELTADELAY_VALUE); + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_MEAS_DELTA_DELAY, value); + + /* Idd number of shut on board */ + value = MfxIddConfig.ShuntNbOnBoard; + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNTS_ON_BOARD, value); +} + +/** + * @brief This function allows to modify number of shunt used for a measurement + * @param DeviceAddr: Device address on communication Bus + * @retval None. + */ +void mfxstm32l152_IDD_ConfigShuntNbLimit(uint16_t DeviceAddr, uint8_t ShuntNbLimit) +{ + uint8_t mode = 0; + + /* Get the current register value */ + mode = MFX_IO_Read((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_CTRL); + + /* Clear number of shunt limit */ + mode &= ~(MFXSTM32L152_IDD_CTRL_SHUNT_NB); + + /* Clear number of shunt limit */ + mode |= ((ShuntNbLimit << 1) & MFXSTM32L152_IDD_CTRL_SHUNT_NB); + + /* Write noewx desired limit */ + MFX_IO_Write((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_CTRL, mode); +} + +/** + * @brief Get Idd current value + * @param DeviceAddr: Device address on communication Bus + * @param ReadValue: Pointer on value to be read + * @retval Idd value in 10 nA. + */ +void mfxstm32l152_IDD_GetValue(uint16_t DeviceAddr, uint32_t *ReadValue) +{ + uint8_t data[3]; + + MFX_IO_ReadMultiple((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_VALUE_MSB, data, sizeof(data)) ; + + /* Recompose Idd current value */ + *ReadValue = (data[0] << 16) | (data[1] << 8) | data[2]; + +} + +/** + * @brief Get Last shunt used for measurement + * @param DeviceAddr: Device address on communication Bus + * @retval Last shunt used + */ +uint8_t mfxstm32l152_IDD_GetShuntUsed(uint16_t DeviceAddr) +{ + return(MFX_IO_Read((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_IDD_SHUNT_USED)); +} + +/** + * @brief Configure mfx to enable Idd interrupt + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_IDD_EnableIT(uint16_t DeviceAddr) +{ + MFX_IO_ITConfig(); + + /* Enable global IDD interrupt source */ + mfxstm32l152_EnableITSource(DeviceAddr, MFXSTM32L152_IRQ_IDD); +} + +/** + * @brief Clear Idd global interrupt + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_IDD_ClearIT(uint16_t DeviceAddr) +{ + /* Clear the global IDD interrupt source */ + mfxstm32l152_ClearGlobalIT(DeviceAddr, MFXSTM32L152_IRQ_IDD); +} + +/** + * @brief get Idd interrupt status + * @param DeviceAddr: Device address on communication Bus. + * @retval IDD interrupts status + */ +uint8_t mfxstm32l152_IDD_GetITStatus(uint16_t DeviceAddr) +{ + /* Return IDD interrupt status */ + return(mfxstm32l152_GlobalITStatus(DeviceAddr, MFXSTM32L152_IRQ_IDD)); +} + +/** + * @brief disable Idd interrupt + * @param DeviceAddr: Device address on communication Bus. + * @retval None. + */ +void mfxstm32l152_IDD_DisableIT(uint16_t DeviceAddr) +{ + /* Disable global IDD interrupt source */ + mfxstm32l152_DisableITSource(DeviceAddr, MFXSTM32L152_IRQ_IDD); +} + + +/* ------------------------------------------------------------------ */ +/* --------------------- ERROR MANAGEMENT --------------------------- */ +/* ------------------------------------------------------------------ */ + +/** + * @brief Read Error Source. + * @param DeviceAddr: Device address on communication Bus. + * @retval Error message code with error source + */ +uint8_t mfxstm32l152_Error_ReadSrc(uint16_t DeviceAddr) +{ + /* Get the current source register value */ + return(MFX_IO_Read((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_ERROR_SRC)); +} + +/** + * @brief Read Error Message + * @param DeviceAddr: Device address on communication Bus. + * @retval Error message code with error source + */ +uint8_t mfxstm32l152_Error_ReadMsg(uint16_t DeviceAddr) +{ + /* Get the current message register value */ + return(MFX_IO_Read((uint8_t) DeviceAddr, MFXSTM32L152_REG_ADR_ERROR_MSG)); +} + +/** + * @brief Enable Error global interrupt + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ + +void mfxstm32l152_Error_EnableIT(uint16_t DeviceAddr) +{ + MFX_IO_ITConfig(); + + /* Enable global Error interrupt source */ + mfxstm32l152_EnableITSource(DeviceAddr, MFXSTM32L152_IRQ_ERROR); +} + +/** + * @brief Clear Error global interrupt + * @param DeviceAddr: Device address on communication Bus. + * @retval None + */ +void mfxstm32l152_Error_ClearIT(uint16_t DeviceAddr) +{ + /* Clear the global Error interrupt source */ + mfxstm32l152_ClearGlobalIT(DeviceAddr, MFXSTM32L152_IRQ_ERROR); +} + +/** + * @brief get Error interrupt status + * @param DeviceAddr: Device address on communication Bus. + * @retval Error interrupts status + */ +uint8_t mfxstm32l152_Error_GetITStatus(uint16_t DeviceAddr) +{ + /* Return Error interrupt status */ + return(mfxstm32l152_GlobalITStatus(DeviceAddr, MFXSTM32L152_IRQ_ERROR)); +} + +/** + * @brief disable Error interrupt + * @param DeviceAddr: Device address on communication Bus. + * @retval None. + */ +void mfxstm32l152_Error_DisableIT(uint16_t DeviceAddr) +{ + /* Disable global Error interrupt source */ + mfxstm32l152_DisableITSource(DeviceAddr, MFXSTM32L152_IRQ_ERROR); +} + +/** + * @brief FOR DEBUG ONLY + */ +uint8_t mfxstm32l152_ReadReg(uint16_t DeviceAddr, uint8_t RegAddr) +{ + /* Get the current register value */ + return(MFX_IO_Read((uint8_t) DeviceAddr, RegAddr)); +} + +void mfxstm32l152_WriteReg(uint16_t DeviceAddr, uint8_t RegAddr, uint8_t Value) +{ + /* set the current register value */ + MFX_IO_Write((uint8_t) DeviceAddr, RegAddr, Value); +} + +/* ------------------------------------------------------------------ */ +/* ----------------------- Private functions ------------------------ */ +/* ------------------------------------------------------------------ */ +/** + * @brief Check if the device instance of the selected address is already registered + * and return its index + * @param DeviceAddr: Device address on communication Bus. + * @retval Index of the device instance if registered, 0xFF if not. + */ +static uint8_t mfxstm32l152_GetInstance(uint16_t DeviceAddr) +{ + uint8_t idx = 0; + + /* Check all the registered instances */ + for(idx = 0; idx < MFXSTM32L152_MAX_INSTANCE ; idx ++) + { + if(mfxstm32l152[idx] == DeviceAddr) + { + return idx; + } + } + + return 0xFF; +} + +/** + * @brief Release registered device instance + * @param DeviceAddr: Device address on communication Bus. + * @retval Index of released device instance, 0xFF if not. + */ +static uint8_t mfxstm32l152_ReleaseInstance(uint16_t DeviceAddr) +{ + uint8_t idx = 0; + + /* Check for all the registered instances */ + for(idx = 0; idx < MFXSTM32L152_MAX_INSTANCE ; idx ++) + { + if(mfxstm32l152[idx] == DeviceAddr) + { + mfxstm32l152[idx] = 0; + return idx; + } + } + return 0xFF; +} + +/** + * @brief Internal routine + * @param DeviceAddr: Device address on communication Bus. + * @param RegisterAddr: Register Address + * @param PinPosition: Pin [0:23] + * @param PinValue: 0/1 + * @retval None + */ +void mfxstm32l152_reg24_setPinValue(uint16_t DeviceAddr, uint8_t RegisterAddr, uint32_t PinPosition, uint8_t PinValue ) +{ + uint8_t tmp = 0; + uint8_t pin_0_7, pin_8_15, pin_16_23; + + pin_0_7 = PinPosition & 0x0000ff; + pin_8_15 = PinPosition >> 8; + pin_8_15 = pin_8_15 & 0x00ff; + pin_16_23 = PinPosition >> 16; + + if (pin_0_7) + { + /* Get the current register value */ + tmp = MFX_IO_Read(DeviceAddr, RegisterAddr); + + /* Set the selected pin direction */ + if (PinValue != 0) + { + tmp |= (uint8_t)pin_0_7; + } + else + { + tmp &= ~(uint8_t)pin_0_7; + } + + /* Set the new register value */ + MFX_IO_Write(DeviceAddr, RegisterAddr, tmp); + } + + if (pin_8_15) + { + /* Get the current register value */ + tmp = MFX_IO_Read(DeviceAddr, RegisterAddr+1); + + /* Set the selected pin direction */ + if (PinValue != 0) + { + tmp |= (uint8_t)pin_8_15; + } + else + { + tmp &= ~(uint8_t)pin_8_15; + } + + /* Set the new register value */ + MFX_IO_Write(DeviceAddr, RegisterAddr+1, tmp); + } + + if (pin_16_23) + { + /* Get the current register value */ + tmp = MFX_IO_Read(DeviceAddr, RegisterAddr+2); + + /* Set the selected pin direction */ + if (PinValue != 0) + { + tmp |= (uint8_t)pin_16_23; + } + else + { + tmp &= ~(uint8_t)pin_16_23; + } + + /* Set the new register value */ + MFX_IO_Write(DeviceAddr, RegisterAddr+2, tmp); + } +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/