This is a library for the MAX17055 Li+ Battery Fuel Gauge.
Dependents: Low_Power_Long_Distance_IR_Vision_Robot MAX17055_EZconfig MAX17055_EZconfig_Sample Low_Power_Long_Distance_IR_Vision_Robot
Fork of max17055 by
Diff: max17055.cpp
- Revision:
- 19:20590e00feab
- Parent:
- 18:37bca022d144
- Child:
- 20:dcb0e5893677
diff -r 37bca022d144 -r 20590e00feab max17055.cpp --- a/max17055.cpp Wed Oct 10 00:35:12 2018 +0000 +++ b/max17055.cpp Tue Oct 23 17:30:14 2018 +0000 @@ -166,32 +166,26 @@ * @retval 0 on success * @retval non-0 for errors */ -int MAX17055::write_and_verify_reg(Registers_e reg_addr, uint16_t reg_data) +int MAX17055::write_and_verify_reg(Registers_e reg_addr, uint16_t reg_data2write) { - int retries = 8; + int retries = 0; int ret; int statusRead; int statusWrite; uint16_t read_data; + do { - statusWrite = writeReg(reg_addr, reg_data); + statusWrite = writeReg(reg_addr, reg_data2write); if (statusWrite != F_SUCCESS_0) - ret = F_ERROR_1; - wait_ms(3); + return F_ERROR_1; + wait_ms(1); statusRead = readReg(reg_addr, read_data); if (statusRead != F_SUCCESS_0) - ret = F_ERROR_1; - if (read_data != reg_data) { - ret = F_ERROR_3; - retries--; - } - } while (retries && read_data != reg_data); - - if (ret!=F_SUCCESS_0) - return ret; - else - return F_SUCCESS_0; + return F_ERROR_1; + } while (reg_data2write != read_data && retries++<3); + + return F_SUCCESS_0; } /** @@ -208,13 +202,15 @@ int ret; int time_out = 10; + int32_t status; uint16_t hibcfg_value; + uint16_t read_data; -// status = readReg(VERSION_REG, read_data); -// if (status != F_SUCCESS_0) -// return status; - + status = readReg(VERSION_REG, read_data); + if (status != F_SUCCESS_0) + return status; + printf("Version REG = %X \r\n", read_data); ///STEP 0. Check for POR (Skip load model if POR bit is cleared) if (check_POR_func() == F_ERROR_5) @@ -225,28 +221,35 @@ if (ret < F_SUCCESS_0) { return ret; } + printf("STEP 1\r\n"); ///STEP 1.2. Force exit from hibernate hibcfg_value = forcedExitHiberMode(); + printf("STEP 1.2\r\n"); ///STEP 2. Initialize configuration ///STEP 2.1. Load EZ Config EZconfig(des_data); + printf("STEP 2\r\n"); ///STEP 2.2. Poll ModelCFG.ModelRefresh bit for clear ret = poll_flag_clear(MODELCFG_REG, MAX17055_MODELCFG_REFRESH, time_out); if(ret < F_SUCCESS_0) { return ret; } + printf("STEP 2.2\r\n"); ///STEP3. Restore original HibCfg writeReg(HIBCFG_REG, hibcfg_value); + printf("STEP 3\r\n"); /* Clear Status.POR */ ret = clear_POR_bit(); if (ret < F_SUCCESS_0) return ret; //See errors + printf("Clear POR bit\r\n"); return F_SUCCESS_0; + } /** @@ -264,7 +267,7 @@ uint16_t read_data; readReg(STATUS_REG, read_data); - printf("STATUS REF = %X \r\n", read_data); +// printf("STATUS REF = %X \r\n", read_data); if (!(read_data & MAX17055_STATUS_POR ) ) { return F_ERROR_5; //POR not detected. } else @@ -313,15 +316,19 @@ int ret; do { - wait_ms(1); + wait_ms(50); ret = readReg(reg_addr, data); +// printf("read reg %X\r\n", data); +// printf("mask %X\r\n", mask); if(ret < F_SUCCESS_0) return F_ERROR_1; + if(!(data & mask)) return F_SUCCESS_0; timeout -= 1; +// printf("end timeout %d \r\n", timeout); } while(timeout > 0); return F_ERROR_4; @@ -406,19 +413,21 @@ const int param_EZ_FG1 = 0x8400; // Sets config bit for the charge voltage for the m5 const int param_EZ_FG2 = 0x8000; uint16_t dpacc, ret; + const int DIV_32 = 5;//DesignCap divide by 32 for EZ config + const int DIV_16 = 4;//DesignCap divide by 16 only for custom ini files ///STEP 2.1.2 Store the EZ Config values into the appropriate registers. ret = writeReg(DESIGNCAP_REG, des_data.designcap); - ret = writeReg(DQACC_REG, des_data.designcap >> 5); //DesignCap divide by 32 + ret = writeReg(DQACC_REG, des_data.designcap >> DIV_32); ret = writeReg(ICHGTERM_REG, des_data.ichgterm); ret = writeReg(VEMPTY_REG, des_data.vempty); if (des_data.vcharge > charger_th) { - dpacc = (des_data.designcap >> 5) * chg_V_high / des_data.designcap; + dpacc = (des_data.designcap >> DIV_32) * chg_V_high / des_data.designcap; ret = writeReg(DPACC_REG, dpacc); ret = writeReg(MODELCFG_REG, param_EZ_FG1); // } else { - dpacc = (des_data.designcap >> 5) * chg_V_low / des_data.designcap; + dpacc = (des_data.designcap >> DIV_32) * chg_V_low / des_data.designcap; ret = writeReg(DPACC_REG, dpacc); ret = writeReg(MODELCFG_REG, param_EZ_FG2); }