Diff: pot.h

Revision:

3:ae45e29f5d4f

Parent:

1:e116808d8b00

Child:

4:710464cb44fc

diff -r b0274df58f4c -r ae45e29f5d4f pot.h
--- a/pot.h	Fri Jan 05 04:37:54 2018 +0000
+++ b/pot.h	Sat Jan 13 11:49:18 2018 +0000
@@ -17,7 +17,6 @@
 /*Pin defination for PWM based brightness control */
 #define _PWM                 PB_7   
 
-
 /*Pin defination for alarm drivers  */
 #define BUZ                 PC_6
 #define HTR                 PC_8 
@@ -49,21 +48,8 @@
 
 /*UART buffer settings */
 #define RX_BUFFER_SIZE      0x19           //25 bytes or char to be stored
+#define TX_BUFFER_SIZE      0x19
+
 #define NO_MAX_POT          0x08           //maximum no. of of eot devices to be connected
 #define NMEA_END_CHAR_1     '\n'
 #define NMEA_MAX_LENGTH     30
-
-                    //digit0, 1,   2,   3
-char print_FH[5]     = {0x40,0x00,0x37,0x47};
-char print_HH[5]     = {0x40,0x00,0x37,0x37};
-char print_SH[5]     = {0x40,0x00,0x37,0x5b};
-char print_DSH[5]    = {0x40,0x37,0x5b,0x3d};
-char print_FS[5]     = {0x08,0x00,0x5b,0x47};
-char print_HS[5]     = {0x08,0x00,0x5b,0x37};
-char print_SS[5]     = {0x08,0x00,0x5b,0x5b};
-char print_DSS[5]    = {0x08,0x5b,0x5b,0x3d};
-char print_FWE[5]    = {0x00,0x4f,0x5d,0x47};
-char print_STOP[5]   = {0x67,0x1d,0x0f,0x5b};
-char print_STBY[5]   = {0x33,0x1f,0x0f,0x5b};
-
-char *commands[11] = {print_FH,print_HH,print_SH,print_DSH,print_FS,print_HS,print_SS,print_DSS,print_FWE,print_STOP,print_STBY};