Introduction¶

This Wiki page describes how to use the sample code to evaluate JDI_MIP. For JDI_MIP, please refer to the following Wiki page

https://os.mbed.com/teams/JapanDisplayInc/wiki/MIP-Reflective-type-Color-Display

https://os.mbed.com/teams/JapanDisplayInc/wiki/SPI_MIP8

Constitution¶

• FRDM-K64F(NXP)
• JDI_MIP Panel
• JDI_MIP Interface board.

Usage¶

1. Get MIP-panel, and JDI_MIP Interface Board, FRDM-K64F(NXP).

2. Import into compiler & Compile Program.

/media/uploads/JDI_Mbed_Team/anordertodownloadthesamplecodecompilerunonthetargetboard_u3lVTcw.pdf

3. Copy Setting File and Image to micro SD-CARD.

a) Download the following file corresponding to the target panel, and rename file identifier (.bin -> .zip), and unzip the file on micro SD Card's root directory.

• LPM013M126x (176x176) :/media/uploads/JDI_Mbed_Team/sdcard_176x176.bin
• LPM027M128x (400x240) :/media/uploads/JDI_Mbed_Team/sdcard_400x240.bin
• LPM044M141x (640x480) & TX11D200 : /media/uploads/JDI_Mbed_Team/sdcard_640x480.bin

ex.) in case of LPM044M141x (640x480) :

b) Insert micro SD-CARD to FRDM-K64F.

4. Upload binary file to FRDM-K64F.and push Reset Button.

Interface board¶

• Get from Switch Science
• Schematic/Parts list
• Gerber data(rename bin->zup, and unzip)

/media/uploads/STakayama/jdi_mip8_lcd_last.pdf

/media/uploads/STakayama/jdi-mip-pcb_partslist.pdf

/media/uploads/STakayama/jdi_mip8_lcd_last.bin

• Rename .bin to .zip,and unzip -> gerber data files.

FRDM Pin(Port) assign¶

Program Overview¶

Sample Code (.bin)¶

/media/uploads/JDI_Mbed_Team/mip8f_frdm_sample.k64f.bin

• MIP8f_FRDM_sample demo

Special Thanks¶

• ARM mbed team
• NXP for FRDM-K64F
• Switch Science for Interface Board
• Adafruit Industries for Adafruit_LEDBackpack.
• Neil Thiessen for SDFileSystem.
• MikroElektronika for GLCD Font
• Many developers