JapanDisplayInc
Number charactors count up sample with MIP8F_SPI_Ver30
Dependencies: MIP8F_SPI_Ver30 mbed
Number charactors count up sample like a speed meter of a car with MIP8F_SPI_Ver30
Introduction
Mumber charactors count up sample like a speed meter of a car with MIP8F_SPI_Ver30
Only for LPM027M128x (400x240) ,JDI DIsplay.
Other information , please refer to https://os.mbed.com/teams/JapanDisplayInc/code/MIP8f_FRDM_sample/
Usage
Copy Setting File and Image to micro SD-CARD. you can NOT use same sample color images of OTHER VERSION SAMPLE.
a) Download the following file corresponding to the target panel, and rename file identifier (.bin -> .zip), and unzip the file on micro SD Card's root directory.
LPM027M128x (400x240) :/media/uploads/JDI_Mbed_Team/400x240_ver30.bin
b) Insert micro SD-CARD to FRDM-K64F. c) Upload binary file to FRDM-K64F.and push Reset Button.
Other information
refer to Usage on https://os.mbed.com/teams/JapanDisplayInc/code/MIP8f_FRDM_sample/
this Sample Code (.bin)
/media/uploads/JDI_Mbed_Team/mip8f_frdm_sample_countupdigit.k64f.bin
Diff: SDFileSystem/FATFileSystem/ChaN/diskio.h
- Revision:
- 0:33fe30a2b785
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem/FATFileSystem/ChaN/diskio.h Tue Sep 04 06:44:01 2018 +0000
@@ -0,0 +1,80 @@
+/*-----------------------------------------------------------------------/
+/ Low level disk interface modlue include file (C)ChaN, 2014 /
+/-----------------------------------------------------------------------*/
+
+#ifndef _DISKIO_DEFINED
+#define _DISKIO_DEFINED
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define _USE_WRITE 1 /* 1: Enable disk_write function */
+#define _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */
+
+#include "integer.h"
+
+
+/* Status of Disk Functions */
+typedef BYTE DSTATUS;
+
+/* Results of Disk Functions */
+typedef enum {
+ RES_OK = 0, /* 0: Successful */
+ RES_ERROR, /* 1: R/W Error */
+ RES_WRPRT, /* 2: Write Protected */
+ RES_NOTRDY, /* 3: Not Ready */
+ RES_PARERR /* 4: Invalid Parameter */
+} DRESULT;
+
+
+/*---------------------------------------*/
+/* Prototypes for disk control functions */
+
+
+DSTATUS disk_initialize (BYTE pdrv);
+DSTATUS disk_status (BYTE pdrv);
+DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
+DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
+DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff);
+
+
+/* Disk Status Bits (DSTATUS) */
+
+#define STA_NOINIT 0x01 /* Drive not initialized */
+#define STA_NODISK 0x02 /* No medium in the drive */
+#define STA_PROTECT 0x04 /* Write protected */
+
+
+/* Command code for disk_ioctrl fucntion */
+
+/* Generic command (Used by FatFs) */
+#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */
+#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */
+#define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */
+#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */
+#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */
+
+/* Generic command (Not used by FatFs) */
+#define CTRL_POWER 5 /* Get/Set power status */
+#define CTRL_LOCK 6 /* Lock/Unlock media removal */
+#define CTRL_EJECT 7 /* Eject media */
+#define CTRL_FORMAT 8 /* Create physical format on the media */
+
+/* MMC/SDC specific ioctl command */
+#define MMC_GET_TYPE 10 /* Get card type */
+#define MMC_GET_CSD 11 /* Get CSD */
+#define MMC_GET_CID 12 /* Get CID */
+#define MMC_GET_OCR 13 /* Get OCR */
+#define MMC_GET_SDSTAT 14 /* Get SD status */
+
+/* ATA/CF specific ioctl command */
+#define ATA_GET_REV 20 /* Get F/W revision */
+#define ATA_GET_MODEL 21 /* Get model name */
+#define ATA_GET_SN 22 /* Get serial number */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif