Prueba todas las maneras de configurar una pantalla LCD alfanumérica en diferentes puertos
Dependencies: FRDM_TSI TextLCD mbed
main.cpp
- Committer:
- Antulius
- Date:
- 2019-05-08
- Revision:
- 8:39219ab1efd9
- Parent:
- 7:af295ac5f904
- Child:
- 9:26618de199fc
File content as of revision 8:39219ab1efd9:
/* ########################################################################### ** Archivo : main.c ** Proyecto : FRDM-KL46Z_LCD_Test ** Procesador : MKL46Z256VLL4 ** Herramienta : Mbed ** Version : Driver 01.01 ** Compilador : GNU C Compiler ** Fecha/Hora : 14-07-2015, 11:48, # CodeGen: 0 ** Descripción : ** Este proyecto hace... ** This module contains user's application code. ** Componentes : GPIO, Timer, etc . ** Configuraciones : Includes, Stacks y Drivers externos ** Autores : ** ATEAM Development Group: ** - Antulio Morgado Valle ** ** Versión : Beta ** Revisión : A ** Release : 0 ** Date : 20/10/2019 ** Bugs & Fixes : ** Added support for Led_RGB ** 22/09/2018 ** Added LCD Menu, Beta version (with bugs) ** ** ###########################################################################*/ /* :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: : Includes :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: */ #include "mbed.h" #include "I2C.h" #include "SPI.h" #include "Serial.h" #include "TextLCD.h" #include "stdio.h" /* :............................................................................... : Definiciones :............................................................................... */ #define Ticker_Rate 1000 // Periodo de interrupción (us) #define LCD_Filas 4 // Número de Renglones del LCD #define LCD_Columnas 20 // Número de Caracteres x Renglón del LCD #define Buzz_On 1 // Estado para Buzzer Encendido #define Buzz_Off 0 // Estado para Buzzer Apagado #define on 0 // Estado para botón presionado #define off 1 // Estado para botón sin presionar #define hold 2 // Estado para botón mantenido presionado #define release 3 // Estado para botón al liberarse /* +------------------------------------------------------------------------------- | Configuración de Puertos +------------------------------------------------------------------------------- */ Ticker TimerInt; // Inicializa la Interrupción por Timer DigitalOut led_monitor(LED2); // Inicializa el LED Monitor DigitalOut buzzer (PTE31); // Inicializa el Buzzer Piezo Eléctrico //PwmOut buzzer (PTE31); // PWM Control del Elemento Calefactor /* ** ------------------------------------------------------------------- ** Inicialización de los Pines de Funciones Especiales. ** ------------------------------------------------------------------- */ /************************************************* * Host PC Communication channels **************************************************/ Serial terminal(USBTX, USBRX); // Inicializa la Comunicación Serial a la PC //Serial terminal(PTA2,PTA1); // Terminal Serial //Serial terminal(PTE0, PTE1); // Tx, Rx Using MAX3232 or BlueTooth /************************************************* * Bluetooth Communication support ************************************************** * Initialize the library with the numbers of the interface pins * Board Freedom FRDM-KL46Z * IDE Mbed On Line Compiler ***************************************************/ Serial bluetooth(PTE0, PTE1); // Tx, Rx /************************************************* * I2C Communication ************************************************** * Initialize the library with the numbers of the interface pins * Board Freedom FRDM-KL46Z * IDE Mbed On Line Compiler * LCD I2C PCF8574A * Pin Board LCD * I2C_SCL SCL (white) + resistance pull-up 4.7k * I2C_SDA SDA (blue) + resistance pull-up 4.7k * 5V 5V (red) * GND GND (black) ***************************************************/ //I2C i2c_lcd(PTC2,PTC1); // SDA, SCL /************************************************* * SPI Communication ************************************************** * Initialize the library with the numbers of the interface pins * Board Freedom FRDM-KL46Z * IDE Mbed On Line Compiler * LCD SPI SN74HC595 * Pin Board LCD * SPI_MOSI SER (white) * SPI_MISO none (blue) * SPI_CLK SRCLK * SPI_PCS RCLK * 5V 5V (red) * GND GND (black) ***************************************************/ SPI spi_lcd(PTD6,PTD7,PTD5,PTD4); // MOSI, MISO, SCLK, SSEL /************************************************* * LCD instantiation **************************************************/ //TextLCD LCD(PTC5, PTC6, PTC8, PTC9, PTC10, PCT11, TextLCD::LCD20x2); // 4bit bus: rs, e, d4-d7 //TextLCD_I2C lcd(&i2c_lcd, 0x7E, TextLCD::LCD20x4); // I2C bus, PCF8574A Arduino Shield, LCD Type TextLCD_SPI lcd(&spi_lcd, PTD4, TextLCD::LCD16x4, TextLCD::HD44780); // SPI bus, SN74595 expander, CS pin, LCD Type /* ** =================================================================== ** Variables Globales del Programa ** =================================================================== */ uint16_t Rate=Ticker_Rate/2; // Velocidad de barrido (500us = 0.5ms) uint16_t counter=250; // Cuenta inicial de 250us int16_t N_Interrupciones; // Contador de Overrunig /* ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | Definición de Funciones Prototipo y Rutinas de los Vectores de Interrupción ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ */ void setup(void); // Rutina de Inicialización para el Hardware void Ticker_OnInterrupt(void); // Rutina de Atención para el Ticker void buzzer_beep(void); // Pitidos del Buzzer //void I2C_scanner(void); // Busca dispositivos conectados al bus I2C void test_LCD(void); // Prueba la operación del LCD void blinking_led(void); // Rutina de Parpadeo del Led monitor /* #=============================================================================== | | P R O G R A M A P R I N C I P A L | #=============================================================================== */ int main() { // Inicialización de variables, puertos e interrupciones terminal.baud(115200); // Se configura la velocidad de transmisión e inicia la comunicación serial. terminal.printf(" System is Wake Up!.\n\r"); setup(); //Inicializa el Hardware Principal while (true) // El Lazo del Programa principal está aquí !!! { lcd.cls(); lcd.locate(0,0); lcd.printf("Bienvenidos Sean"); // El LCD saluda al Mundo lcd.printf(" a la \n"); // y a la // lcd.setInvert(on); lcd.printf("Gloriosa ESIME !\n"); // Gloriosa ESIME ! // lcd.setInvert(off); lcd.locate(0,4); lcd.printf("Flashings: %d",N_Interrupciones); // Led Flasings Transcurridos wait(0.5); // Blinking_Led(); // Parapadeo del LED por Software } } /* END main */ /* ................................................................................ : Rutinas de los Vectores de Interrupción ................................................................................ */ void Ticker_OnInterrupt() // Rutina de Atención al Ticker { counter--; // Aquí va la Rutina de Servicio ! if (!counter) { terminal.printf("Counter Finish! \r\n"); led_monitor = !led_monitor; // Parapadeo del LED por Interrupción (Toggle the LED) N_Interrupciones++; counter = Rate; // Restablece el contador } } /* END Events */ /* ________________________________________________________________________________ | | Funciones Prototipo |_______________________________________________________________________________ */ // Las Funciones Prototipo van aquí ! void setup() // Inicialización del Hardware del Sistema { /* Inicia la comunicación la Terminal */ /* 115200 Bauds, 8 bits, 1 stop, N parity */ terminal.baud(115200); // Se inicia la comunicación serial. terminal.printf(" System is Wake Up!.\n\r"); /* Inicialización del Bluetooth */ bluetooth.baud(115200); // Se inicia la comunicación Bluetooth. // bluetooth.scanf("%s", buf); //Lee un carácter desde el Bluetooth // bluetooth.printf("recv: %s", buf); //Hace eco al Bluetooth // terminal.printf("recv: %s\r\n", buf); //Imprime en la Terminal el caracter recibido bluetooth.printf("Bluetooth Starting OK! ... \n\r"); terminal.printf("Bluetooth Starting OK! ... \n\r"); /* Prueba del Buzzer */ terminal.printf("Testing Buzzer... \n\r"); buzzer_beep(); /* Configufración del Display LCD */ /* Mucho OjO !!! */ /* LCD Utilizando el SPI */ spi_lcd.frequency(1000000); // Frecuencia de operación para el SPI spi_lcd.format(8,0); // Modo de Operación para el SPI /* LCD Utilizando el I2C */ // I2C_scanner(); // Busca Dispositivos I2C conectados al Bus /* i2c_lcd.frequency(100000); // Frecuencia de operación para el I2C (100KHz) i2c_lcd.start(); // Inicio de operación para el I2C // lcd.setBacklight(LightOn ); // Enciende la luz de fondo del LCD terminal.printf("I2C Initialized...\n\r"); */ /* Prueba de operación del LCD */ terminal.printf("LCD Test, please wait...\n\r"); test_LCD(); // Rutina de pueba del LCD terminal.printf("LCD Initialized Succesfuly...\n\r"); /* Arranque de la interrupción por el Ticker */ terminal.printf("Ticker Starting Now...\n\r"); TimerInt.attach_us(&Ticker_OnInterrupt, Ticker_Rate); // Le asigna el periodo de barrido de 1ms (Ticker_Rate=1000) } void test_LCD() { lcd.cls(); lcd.printf("Hello World!\n"); // El LCD saluda al Mundo! lcd.setInvert(on); lcd.printf("Hola Mundo!\n"); // El LCD saluda al Mundo! lcd.setInvert(off); lcd.printf("Ciao Mondo!\n"); // El LCD saluda al Mundo! lcd.setInvert(on); lcd.printf("Bonjour le Monde"); // El LCD saluda al Mundo! wait(10); lcd.cls(); // Limpia el Display LCD lcd.setBacklight(TextLCD::LightOff); // Apaga la Iluminación de Fondo Timer Elpased_Time; //Inicializa el Tiempo a Transcurrir Elpased_Time.start(); for (int row=0; row<lcd.rows(); row++)// Prueba toda la Pantalla { uint16_t col=0; lcd.putc('0' + row); for (col=1; col<lcd.columns()-1; col++) { lcd.putc('*'); // Llena lalinea con el carácter "*" } lcd.putc('+'); // Al final pone el carácter "+" } Elpased_Time.start(); // Calcula el tiempo transcurrido terminal.printf("All my hard work took %f sec\r\n", Elpased_Time.read()); wait(1); terminal.printf("LCD Display and TextLCD Enhanced Test Completed.\n\r"); lcd.cls(); lcd.setCursor(TextLCD::CurOff_BlkOn); // // Set and show user defined characters. A maximum of 8 UDCs are supported by the HD44780. // They are defined by a 5x7 bitpattern. lcd.setUDC(0, (char *) udc_0); // Muestra el cursor |> lcd.putc(0); terminal.printf("LCD Starting OK! ... \n\r"); } void buzzer_beep() { buzzer = Buzz_On; wait_ms(750); buzzer = Buzz_Off; wait_ms(125); buzzer = Buzz_On; wait_ms(250); buzzer = Buzz_Off; wait_ms(125); buzzer = Buzz_On; wait_ms(500); buzzer = Buzz_Off; } void blinking_led() // Software Blinking routine for LED { // The on-board LED is connected, via a resistor, to +3.3V (not to GND). // So to turn the LED on or off we have to set it to 0 or 1 respectively led_monitor = 0; // turn the LED on wait_ms(200); // 200 millisecond led_monitor = 1; // turn the LED off wait_ms(1000); // 1000 millisecond } /* void I2C_scanner() { terminal.printf ("I2C scanner. Scanning ..."); uint8_t count = 0; char test[] = { 0b00000000, 0b00000000, // RS=0, EN=1,0, LED+=1, NC, DB4=DB5=DB6=DB7=0 en datos 0b01101100, 0b00101100, // RS=0, EN=1,0, LED+=1, NC, DB4=DB5=1 en datos, 0b01101100, 0b00101100, // RS=0, EN=1,0, LED+=1, NC, DB4=DB5=1 en datos, 0b01101100, 0b00101100, // RS=0, EN=1,0, LED+=1, NC, DB4=DB5=1 en datos, 0b01100100, 0b00100100, // RS=0, EN=1,0, LED+=1, NC, DB5=1 en datos, 0b01100100, 0b00100100, // RS=0, EN=1,0, LED+=1, NC, DB5=1 en datos, 0b01100110, 0b00100001, // RS=0, EN=1,0, LED+=1, NC, DB7=N=1 2 líneas, DB6=F=0 5x7puntos, 0b01100000, 0b00100000, // => Display ON/OFF Control. 0b01100001, 0b00100001, // RS=0, EN=1,0, LED+=1, NC, DB7=1 (Display off, cursor off, blink off) 0b01100000, 0b00100000, // => Display Clear. 0b01101000, 0b00101000};// RS=0, EN=1,0, LED+=1, NC, DB4=1 en datos, (Cursor Home}; // Patrón de Prueba // char test[2] = {0x55,0xAA};// Patrón de Prueba i2c_lcd.frequency(100000); // Frecuencia de operación para el I2C (100KHz) i2c_lcd.start(); // Inicio de operación para el I2C for (int i = 8; i < 128; i++) { uint8_t acknoledge = i2c_lcd.write (i,test,22,1); //(dirección, ap_datos, N°_datos, repetición) if (acknoledge == 0) { terminal.printf ("\n\rFound address: "); terminal.printf ("%u DEC",i); // Valor de la dirección en Decimal terminal.printf (" (0x%x HEX)\n\r",i); // Valor de la dirección en Hexadecimal // terminal.printf (" (0x%hd HEX)\n\r",i); // Valor de la dirección en Hexadecimal count++; wait (1); // maybe unneeded? } // end of good response led_monitor = !led_monitor; // Parapadeo del LED } // end of for loop led_monitor = 1; // Apaga el LED i2c_lcd.stop(); // Fin de operación para el I2C terminal.printf ("\n\rDone.\n\r"); terminal.printf ("Found %d Device(s)\n\r",count); } // end of setup */ /* END Program */ /* END Mbed */