Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Dependents: testUniGraphic_150217 maze_TFT_MMA8451Q TFT_test_frdm-kl25z TFT_test_NUCLEO-F411RE ... more
Inits/ILI932x.h
- Committer:
- Geremia
- Date:
- 2015-03-31
- Revision:
- 21:ae0a4eedfc90
- Parent:
- 20:14daa48ffd4c
- Child:
- 30:87855d03d91a
File content as of revision 21:ae0a4eedfc90:
#ifndef MBED_ILI932x_H #define MBED_ILI932x_H #include "mbed.h" #include "TFT932x.h" /** Class for ILI932x tft display controller * to be copypasted and adapted for other controllers */ class ILI932x : public TFT932x { public: /** Create a PAR display interface * @param displayproto PAR_8 or PAR_16 * @param port GPIO port name to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI932x(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 320); /** Create a BUS display interface * @param displayproto BUS_8 or BUS_16 * @param buspins array of PinName to group as Bus * , i.e. PinName buspins[8]={PC_0,PC_1,PC_2,PC_3,D9,D8,D7,D6}; * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI932x(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 320); /** Create an SPI display interface * @param displayproto SPI_8 or SPI_16 * @param Hz SPI speed in Hz * @param mosi SPI pin * @param miso SPI pin * @param sclk SPI pin * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI932x(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, const char* name, unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y= 320); protected: /** Init command sequence */ void init9325(); }; #endif