Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Dependents: testUniGraphic_150217 maze_TFT_MMA8451Q TFT_test_frdm-kl25z TFT_test_NUCLEO-F411RE ... more
Inits/UC1608.h
- Committer:
- Geremia
- Date:
- 2015-02-12
- Revision:
- 0:75ec1b3cde17
- Child:
- 1:ff019d22b275
File content as of revision 0:75ec1b3cde17:
#ifndef MBED_UC1608_H #define MBED_UC1608_H #include "mbed.h" #include "LCD.h" /** Class for UC1608 display controller * to be copypasted and adapted for other controllers */ class UC1608 : public LCD { public: /** Create a PAR_8 display interface * @param displayproto PAR_8 or PAR_16 * @param port GPIO port name to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface */ UC1608(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name); /** Create an SPI_8 display interface * @param displayproto SPI_8 or SPI_16 * @param mosi SPI pin * @param miso SPI pin * @param sclk SPI pin * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param name The name used by the parent class to access the interface */ UC1608(proto_t displayproto, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name); /** set the contrast of the screen * @note here overrided because of not standard command * @param o contrast 0-63 */ virtual void set_contrast(int o); /** Set ChipSelect high or low * @note here overriding the std one, cause CS inverted * @param enable 0/1 */ virtual void BusEnable(bool enable); protected: /** Init command sequence */ void init(); /** set mirror mode * @note here overriding the LCD class default one because of not standard commands * @param mode NONE, X, Y, XY */ virtual void mirrorXY(mirror_t mode); }; #endif