GraphicsDisplay
Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Dependents: testUniGraphic_150217 maze_TFT_MMA8451Q TFT_test_frdm-kl25z TFT_test_NUCLEO-F411RE ... more
Diff: Inits/IST3020.h
- Revision:
- 0:75ec1b3cde17
- Child:
- 1:ff019d22b275
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Inits/IST3020.h Thu Feb 12 22:22:47 2015 +0000
@@ -0,0 +1,53 @@
+#ifndef MBED_IST3020_H
+#define MBED_IST3020_H
+
+
+
+#include "mbed.h"
+#include "LCD.h"
+
+/** Class for IST3020 display controller
+* to be copypasted and adapted for other controllers
+*/
+class IST3020 : public LCD
+{
+
+ public:
+
+ /** Create a PAR_8 display interface
+ * @param displayproto PAR_8 or PAR_16
+ * @param port GPIO port name to use
+ * @param CS pin connected to CS of display
+ * @param reset pin connected to RESET of display
+ * @param DC pin connected to data/command of display
+ * @param WR pin connected to SDI of display
+ * @param RD pin connected to RS of display
+ * @param name The name used by the parent class to access the interface
+ */
+ IST3020(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name);
+
+ /** Create an SPI_8 display interface
+ * @param displayproto SPI_8 or SPI_16
+ * @param mosi SPI pin
+ * @param miso SPI pin
+ * @param sclk SPI pin
+ * @param CS pin connected to CS of display
+ * @param reset pin connected to RESET of display
+ * @param DC pin connected to data/command of display
+ * @param name The name used by the parent class to access the interface
+ */
+ IST3020(proto_t displayproto, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name);
+
+
+
+protected:
+
+
+ /** Init command sequence
+ */
+ void init();
+
+
+
+};
+#endif
\ No newline at end of file
