Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   testUniGraphic_150217 maze_TFT_MMA8451Q TFT_test_frdm-kl25z TFT_test_NUCLEO-F411RE ... more

Revision:
2:713844a55c4e
Child:
4:12ba0ecc2c1f
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Inits/ILI9341.cpp	Fri Feb 13 23:17:55 2015 +0000
@@ -0,0 +1,152 @@
+#include "Protocols.h"
+#include "ILI9341.h"
+
+//////////////////////////////////////////////////////////////////////////////////
+// display settings ///////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////
+
+#define LCDSIZE_X       240 // display X pixels, TFTs are usually portrait view
+#define LCDSIZE_Y       320  // display Y pixels
+
+
+
+ILI9341::ILI9341(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char *name)
+    : TFT(displayproto, port, CS, reset, DC, WR, RD, LCDSIZE_X, LCDSIZE_Y, name)
+{
+    hw_reset();
+    BusEnable(true);
+    init();
+    cls();
+    set_orientation(0);
+    locate(0,0); 
+}
+ILI9341::ILI9341(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char *name)
+    : TFT(displayproto, Hz, mosi, miso, sclk, CS, reset, DC, LCDSIZE_X, LCDSIZE_Y, name)
+{
+    hw_reset(); //TFT class forwards to Protocol class
+    BusEnable(true); //TFT class forwards to Protocol class
+    init(); // per display custom init cmd sequence, implemented here
+    cls();
+    set_orientation(1); //TFT class does for MIPI standard and some ILIxxx
+    locate(0,0); 
+}
+// reset and init the lcd controller
+void ILI9341::init()
+{
+    /* Start Initial Sequence ----------------------------------------------------*/
+    
+    wr_cmd8(0xCB);  // POWER_ON_SEQ_CONTROL             
+     wr_data8(0x39);
+     wr_data8(0x2C);
+     wr_data8(0x00);
+     wr_data8(0x34);
+     wr_data8(0x02);
+     
+    wr_cmd8(0xCF);  // POWER_CONTROL_B              
+     wr_data8(0x00);
+     wr_data8(0xC1);  // Applic Notes 81, was 83, C1 enables PCEQ: PC and EQ operation for power saving
+     wr_data8(0x30);
+     
+     wr_cmd8(0xE8);  // DRIVER_TIMING_CONTROL_A               
+     wr_data8(0x85);
+     wr_data8(0x00);  // AN 10, was 01
+     wr_data8(0x78);  // AN 7A, was 79
+     
+     wr_cmd8(0xEA);  // DRIVER_TIMING_CONTROL_B                    
+     wr_data8(0x00);
+     wr_data8(0x00);
+     
+     wr_cmd8(0xED);                     
+     wr_data8(0x64);
+     wr_data8(0x03);
+     wr_data8(0x12);
+     wr_data8(0x81);
+     
+     wr_cmd8(0xF7);  // PUMP_RATIO_CONTROL                   
+     wr_data8(0x20);
+     
+     wr_cmd8(0xC0);                     // POWER_CONTROL_1
+     wr_data8(0x23);  // AN 21, was 26
+     
+     wr_cmd8(0xC1);                     // POWER_CONTROL_2
+     wr_data8(0x10);  // AN 11, was 11
+     
+     wr_cmd8(0xC5);                     // VCOM_CONTROL_1
+     wr_data8(0x3E);  // AN 3F, was 35
+     wr_data8(0x28);  // AN 3C, was 3E
+     
+     wr_cmd8(0xC7);                     // VCOM_CONTROL_2
+     wr_data8(0x86);  // AN A7, was BE
+     
+     wr_cmd8(0x36);                     // MEMORY_ACCESS_CONTROL
+     wr_data8(0x48);
+     
+     wr_cmd8(0x3A);                     // COLMOD_PIXEL_FORMAT_SET, not present in AN
+     wr_data8(0x55);                 // 16 bit pixel 
+     
+     wr_cmd8(0xB1);                     // Frame Rate
+     wr_data8(0x00);
+     wr_data8(0x18);  // AN 1B, was 1B  1B=70hz             
+     
+     wr_cmd8(0xB6);                       // display function control, INTERESTING
+     wr_data8(0x08);  // AN 0A, was 0A
+     wr_data8(0x82);  // AN A2
+     wr_data8(0x27);  // AN not present
+  //   wr_data8(0x00);  // was present
+     
+     wr_cmd8(0xF2);                     // Gamma Function Disable
+     wr_data8(0x00);  // AN 00, was 08
+     
+     wr_cmd8(0x26);                     
+     wr_data8(0x01);                 // gamma set for curve 01/2/04/08
+     
+     wr_cmd8(0xE0);                     // positive gamma correction
+     wr_data8(0x0F); 
+     wr_data8(0x31); 
+     wr_data8(0x2B); 
+     wr_data8(0x0C); 
+     wr_data8(0x0E); 
+     wr_data8(0x08); 
+     wr_data8(0x4E); 
+     wr_data8(0xF1); 
+     wr_data8(0x37); 
+     wr_data8(0x07); 
+     wr_data8(0x10); 
+     wr_data8(0x03); 
+     wr_data8(0x0E);
+     wr_data8(0x09); 
+     wr_data8(0x00);
+     
+     wr_cmd8(0xE1);                     // negativ gamma correction
+     wr_data8(0x00); 
+     wr_data8(0x0E); 
+     wr_data8(0x14); 
+     wr_data8(0x03); 
+     wr_data8(0x11); 
+     wr_data8(0x07); 
+     wr_data8(0x31); 
+     wr_data8(0xC1); 
+     wr_data8(0x48); 
+     wr_data8(0x08); 
+     wr_data8(0x0F); 
+     wr_data8(0x0C); 
+     wr_data8(0x31);
+     wr_data8(0x36); 
+     wr_data8(0x0F);
+     
+     //wr_cmd8(0x34);                     // tearing effect off
+     
+     //wr_cmd8(0x35);                     // tearing effect on
+      
+  //   wr_cmd8(0xB7);                       // ENTRY_MODE_SET
+  //   wr_data8(0x07);
+         
+     wr_cmd8(0x11);                     // sleep out
+     
+     wait_ms(150);
+     
+     wr_cmd8(0x29);                     // display on
+     
+     wait_ms(150);
+
+}
\ No newline at end of file