![](/media/cache/group/digilogo.png.50x50_q85.jpg)
DigiMesh AT Commands example for mbed XBeeLib By Digi
Fork of XBeeZB_AT_Commands by
This example shows how to read and change configuration parameters of either the local XBee module or a remote XBee module.
See Configuring local and remote modules chapter for more information.
Common Setup
Make sure you have a valid Example Common Setup
Example Setup
Application
You have to configure the remote device 64-bit address by customizing the REMOTE_NODE_ADDR64_MSB and REMOTE_NODE_ADDR64_LSB defines with the remote XBee module 64-bit address.
Running the example
Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter.
The application will do following operations:
Operation | XBee module | parameter | Verification |
---|---|---|---|
Read | local | SL | The result is asserted against the known local module SL value. So just check the assertion passed |
Set | local | NI | Click 'discover remote devices' on the X-CTU connected to the remote. Should discover the local XBee module with the new NI (ni_example_local) |
Read | remote | SL | The result is asserted against the known remote module SL value. So just check the assertion passed |
Set | remote | NI | Refresh the 'NI' parameter in the X-CTU connected to the remote and check it has changed to the new NI (ni_example_remote) |
config.h@3:91b39019eec3, 2015-05-11 (annotated)
- Committer:
- hbujanda
- Date:
- Mon May 11 17:59:26 2015 +0200
- Revision:
- 3:91b39019eec3
- Parent:
- 1:f5686759c861
Automatic upload
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
hbujanda | 0:fd8c52820c01 | 1 | |
hbujanda | 0:fd8c52820c01 | 2 | #if !defined(__CONFIG_H_) |
hbujanda | 0:fd8c52820c01 | 3 | #define __CONFIG_H_ |
hbujanda | 0:fd8c52820c01 | 4 | |
hbujanda | 3:91b39019eec3 | 5 | #define PATFORM_ARCHPRO |
hbujanda | 0:fd8c52820c01 | 6 | |
hbujanda | 0:fd8c52820c01 | 7 | /** Library configuration options */ |
hbujanda | 0:fd8c52820c01 | 8 | #define ENABLE_LOGGING |
hbujanda | 0:fd8c52820c01 | 9 | #define ENABLE_ASSERTIONS |
hbujanda | 3:91b39019eec3 | 10 | #define FRAME_BUFFER_SIZE 10 |
hbujanda | 0:fd8c52820c01 | 11 | #define MAX_FRAME_PAYLOAD_LEN 128 |
hbujanda | 0:fd8c52820c01 | 12 | #define ENABLE_PM_SUPPORT |
hbujanda | 0:fd8c52820c01 | 13 | |
hbujanda | 0:fd8c52820c01 | 14 | #define SYNC_OPS_TIMEOUT_MS 2000 |
hbujanda | 0:fd8c52820c01 | 15 | |
hbujanda | 0:fd8c52820c01 | 16 | #if defined(PATFORM_ARCHPRO) |
hbujanda | 0:fd8c52820c01 | 17 | #define RADIO_TX P4_28 |
hbujanda | 0:fd8c52820c01 | 18 | #define RADIO_RX P4_29 |
hbujanda | 3:91b39019eec3 | 19 | #define RADIO_RESET P2_13 |
hbujanda | 0:fd8c52820c01 | 20 | //#define RADIO_RESET NC |
hbujanda | 0:fd8c52820c01 | 21 | #define RADIO_SLEEP_REQ NC |
hbujanda | 0:fd8c52820c01 | 22 | #define RADIO_ON_SLEEP NC |
hbujanda | 0:fd8c52820c01 | 23 | #define DEBUG_TX P0_2 |
hbujanda | 0:fd8c52820c01 | 24 | #define DEBUG_RX P0_3 |
hbujanda | 0:fd8c52820c01 | 25 | #elif defined(TARGET_LPC1768) |
hbujanda | 0:fd8c52820c01 | 26 | #define RADIO_TX p9 |
hbujanda | 0:fd8c52820c01 | 27 | #define RADIO_RX p10 |
hbujanda | 0:fd8c52820c01 | 28 | #define RADIO_RESET p30 |
hbujanda | 0:fd8c52820c01 | 29 | #define RADIO_SLEEP_REQ NC |
hbujanda | 0:fd8c52820c01 | 30 | #define RADIO_ON_SLEEP NC |
hbujanda | 0:fd8c52820c01 | 31 | #define DEBUG_TX P0_2 |
hbujanda | 0:fd8c52820c01 | 32 | #define DEBUG_RX P0_3 |
hbujanda | 0:fd8c52820c01 | 33 | #elif defined(TARGET_FRDM_KL25) |
hbujanda | 0:fd8c52820c01 | 34 | #define RADIO_TX PTD3 |
hbujanda | 0:fd8c52820c01 | 35 | #define RADIO_RX PTD2 |
hbujanda | 0:fd8c52820c01 | 36 | #define RADIO_RESET NC |
hbujanda | 0:fd8c52820c01 | 37 | #define RADIO_SLEEP_REQ NC |
hbujanda | 0:fd8c52820c01 | 38 | #define RADIO_ON_SLEEP NC |
hbujanda | 0:fd8c52820c01 | 39 | #define DEBUG_TX USBTX |
hbujanda | 0:fd8c52820c01 | 40 | #define DEBUG_RX USBRX |
hbujanda | 0:fd8c52820c01 | 41 | #elif (defined TARGET_LPC11U24) |
hbujanda | 0:fd8c52820c01 | 42 | #define RADIO_TX p9 |
hbujanda | 0:fd8c52820c01 | 43 | #define RADIO_RX p10 |
hbujanda | 0:fd8c52820c01 | 44 | #define RADIO_RESET p30 |
hbujanda | 0:fd8c52820c01 | 45 | #define RADIO_SLEEP_REQ NC |
hbujanda | 0:fd8c52820c01 | 46 | #define RADIO_ON_SLEEP NC |
hbujanda | 0:fd8c52820c01 | 47 | #define DEBUG_TX USBTX |
hbujanda | 0:fd8c52820c01 | 48 | #define DEBUG_RX USBRX |
hbujanda | 0:fd8c52820c01 | 49 | #else |
hbujanda | 0:fd8c52820c01 | 50 | #error "Define a platform" |
hbujanda | 0:fd8c52820c01 | 51 | #endif |
hbujanda | 0:fd8c52820c01 | 52 | |
hbujanda | 0:fd8c52820c01 | 53 | #endif /* __CONFIG_H_ */ |
hbujanda | 0:fd8c52820c01 | 54 |