This CLI (Command Line Interface) is based mbed-os. Both NNN50 and NQ620 are supported.
Fork of NNN40_CLI by
BLE CLI Document can be downloaded here .
Note that when evaluate using Windows PC as the host, the Serial driver need to be installed in advance. The instruction is explained in the link below
https://developer.mbed.org/handbook/Windows-serial-configuration
Once installed, a device called 'mbed Serial Port (COM#)' should be recognized in Device Manager, as shown below
Please open the com port at 115200 8n1 as default
mbed_app.json@25:1423b707b705, 2017-05-12 (annotated)
- Committer:
- tsungta
- Date:
- Fri May 12 01:53:35 2017 +0000
- Revision:
- 25:1423b707b705
update mbed-os to revision 2992; Note that NNN50 is temporary not supported due to the memory constraint
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
tsungta | 25:1423b707b705 | 1 | { |
tsungta | 25:1423b707b705 | 2 | "config": { |
tsungta | 25:1423b707b705 | 3 | "lf_clock_rc_calib_timer_interval": { |
tsungta | 25:1423b707b705 | 4 | "value": 16, |
tsungta | 25:1423b707b705 | 5 | "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_TIMER_INTERVAL" |
tsungta | 25:1423b707b705 | 6 | }, |
tsungta | 25:1423b707b705 | 7 | "lf_clock_rc_calib_mode_config": { |
tsungta | 25:1423b707b705 | 8 | "value": 0, |
tsungta | 25:1423b707b705 | 9 | "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_MODE_CONFIG" |
tsungta | 25:1423b707b705 | 10 | }, |
tsungta | 25:1423b707b705 | 11 | "uart_hwfc": { |
tsungta | 25:1423b707b705 | 12 | "help": "Value: 1 for enable, 0 for disable", |
tsungta | 25:1423b707b705 | 13 | "value": 0, |
tsungta | 25:1423b707b705 | 14 | "macro_name": "MBED_CONF_NORDIC_UART_HWFC" |
tsungta | 25:1423b707b705 | 15 | } |
tsungta | 25:1423b707b705 | 16 | } |
tsungta | 25:1423b707b705 | 17 | } |