Delta / Mbed OS Delta_CLI

This CLI (Command Line Interface) is based mbed-os. Both NNN50 and NQ620 are supported.

Fork of NNN40_CLI by Delta

BLE CLI Document can be downloaded here .

Note that when evaluate using Windows PC as the host, the Serial driver need to be installed in advance. The instruction is explained in the link below

https://developer.mbed.org/handbook/Windows-serial-configuration

Once installed, a device called 'mbed Serial Port (COM#)' should be recognized in Device Manager, as shown below

/media/uploads/tsungta/mbed_serial_port_1.png

Please open the com port at 115200 8n1 as default

mbed_app.json

Committer:
tsungta
Date:
2017-05-12
Revision:
25:1423b707b705

File content as of revision 25:1423b707b705:

{
    "config": {
        "lf_clock_rc_calib_timer_interval": {
            "value": 16,
            "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_TIMER_INTERVAL"
        },
        "lf_clock_rc_calib_mode_config": {
            "value": 0,
            "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_MODE_CONFIG"
        },
        "uart_hwfc": {
            "help": "Value: 1 for enable, 0 for disable",
            "value": 0,
            "macro_name": "MBED_CONF_NORDIC_UART_HWFC"
        }        
    }
}