Diff: main.cpp

Revision:

4:5b64235d1b85

Parent:

3:288b2baffd14

Child:

5:77ad8d8dc9c5

--- a/main.cpp	Thu Jan 16 22:31:47 2014 +0000
+++ b/main.cpp	Thu Jun 12 13:56:06 2014 +0100
@@ -1,31 +1,91 @@
-#include "mbed.h"
-#include "blecommon.h"
-#include "hw/nRF51822s/nRF51822s.h"
-
-nRF51822s          nrf         ( p9, p10, p30, p29 ); /* (tx, rx, rts, cts) */
-GattService        battService ( 0x180F );
-GattCharacteristic battLevel   ( 0x2A19, 1, 1, 
-                                 GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY | 
-                                 GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ);
-
-int main(void)
-{
-    /* Make sure we get a clean start */
-    nrf.reset();
-    
-    /* Add the characteristic to our service */
-    battService.addCharacteristic(battLevel);
-    
-    /* Pass the service into the radio */
-    nrf.getGattServer().addService(battService);
-    
-    /* Configure the radio and start advertising with default values */
-    /* Make sure you've added all of your services before calling this function! */
-    nrf.getGap().startAdvertising();
-
-    /* Now that we're live, update the battery level characteristic */
-    uint8_t batt = 72;
-    nrf.getGattServer().updateValue(battLevel.handle, (uint8_t*)&batt, sizeof(batt));
-    
-    while(1);
-}
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "BLEDevice.h"
+
+BLEDevice  ble;
+
+DigitalOut led1(LED1);
+
+#define NEED_CONSOLE_OUTPUT 0 /* Set this if you need debug messages on the console;
+                               * it will have an impact on code-size and power
+                               * consumption. */
+
+#if NEED_CONSOLE_OUTPUT
+Serial  pc(USBTX, USBRX);
+#define DEBUG(...) { pc.printf(__VA_ARGS__); }
+#else
+#define DEBUG(...) /* nothing */
+#endif /* #if NEED_CONSOLE_OUTPUT */
+
+/* Battery Level Service */
+uint8_t            batt      = 72; /* Battery level */
+GattCharacteristic battLevel   (GattCharacteristic::UUID_BATTERY_LEVEL_CHAR, &batt, sizeof(batt), sizeof(batt),
+                                GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ);
+GattCharacteristic *battChars[] = {
+    &battLevel,
+};
+GattService        battService (GattService::UUID_BATTERY_SERVICE, battChars, sizeof(battChars) / sizeof(GattCharacteristic *));
+
+
+void disconnectionCallback(void)
+{
+    DEBUG("Disconnected!\n\r");
+    DEBUG("Restarting the advertising process\n\r");
+    ble.startAdvertising();
+}
+
+/**
+ * Runs once a second in interrupt context triggered by the 'ticker'; updates
+ * battery level if there is a connection.
+ */
+void periodicCallback(void)
+{
+    led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */
+
+    if (ble.getGapState().connected) {
+        /* Update battery level */
+        batt++;
+        if (batt > 100) {
+            batt = 72;
+        }
+        ble.updateCharacteristicValue(battLevel.getHandle(), (uint8_t *)&batt, sizeof(batt));
+    }
+}
+
+int main(void)
+{
+    led1 = 1;
+    Ticker ticker;
+    ticker.attach(periodicCallback, 1);
+
+    DEBUG("Initialising the nRF51822\n\r");
+    ble.init();
+    ble.onDisconnection(disconnectionCallback);
+
+    /* setup advertising */
+    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
+    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+    ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */
+    ble.startAdvertising();
+
+    ble.addService(battService);
+
+    while (true) {
+        ble.waitForEvent();
+    }
+}