Diff: main.cpp

Revision:

17:b5fab6850e5c

Parent:

14:1b99908360c5

--- a/main.cpp	Wed Feb 03 10:17:14 2016 +0000
+++ b/main.cpp	Fri Feb 05 09:59:52 2016 +0000
@@ -1,49 +1,48 @@
-/**
-  ******************************************************************************
-  * @file       main.cpp
-  * @author     ST Central Labs
-  * @version    V1.0.0
-  * @date       21 Dic 2015
-  * @brief      This demo writes an ndef message with an url inside.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
 #include "mbed.h"
 
 #include "X_NUCLEO_NFC01A1.h"
 #include "NDefLib/NDefNfcTag.h"
 #include "NDefLib/RecordType/RecordURI.h"
+#include "NDefLib/RecordType/RecordText.h" 
 
-/**
- * Write a Ndef URI message linking to st.com site.
- */
+
+int updateM24SR(X_NUCLEO_NFC01A1* nfcNucleo, char* data){
+    
+    //retrieve the NdefLib interface
+    NDefLib::NDefNfcTag& tag =nfcNucleo->getM24SR().getNDefTag();
+    printf("System Init done: !\n\r");
+    /*SESSION 1*/
+    //open the i2c session with the nfc chip
+    if(tag.openSession()){
+        printf("Session opened\n\r");
+        nfcNucleo->getLed1()=1;
+        
+        //create the NDef message and record
+        NDefLib::Message msg;
+        NDefLib::RecordText rText(data);
+        msg.addRecord(&rText);
+        
+        //write the tag
+        if(tag.write(msg)){
+            printf("Tag written\n\r");
+            nfcNucleo->getLed2()=1;
+           
+        }else{
+            printf("Error writing \n\r");
+        }//if-else
+
+        //close the i2c session
+        if(tag.closeSession()){
+           printf("Session closed\n\r");
+           nfcNucleo->getLed3()=1;
+        }else{
+           printf("Error closing the session\n\r");
+        }//if-else
+        
+    }else
+        printf("Error opening the session\n\r");
+    }
+
 int main(void){
     
     //use default board pinout
@@ -57,32 +56,6 @@
     NDefLib::NDefNfcTag& tag =nfcNucleo->getM24SR().getNDefTag();
     printf("System Init done: !\n\r");
     
-    //open the i2c session with the nfc chip
-    if(tag.openSession()){
-        printf("Session opened\n\r");
-        nfcNucleo->getLed1()=1;
-        
-        //create the NDef message and record
-        NDefLib::Message msg;
-        NDefLib::RecordURI rUri(NDefLib::RecordURI::HTTP_WWW,"st.com");
-        msg.addRecord(&rUri);
-
-        //write the tag
-        if(tag.write(msg)){
-            printf("Tag written\n\r");
-            nfcNucleo->getLed2()=1;
-        }else{
-            printf("Error writing \n\r");
-        }//if-else
-
-        //close the i2c session
-        if(tag.closeSession()){
-           printf("Session closed\n\r");
-           nfcNucleo->getLed3()=1;
-        }else{
-           printf("Error closing the session\n\r");
-        }//if-else
-            
-    }else
-        printf("Error opening the session\n\r");
+    updateM24SR(nfcNucleo,"CIAO ANITA");
+    
 }
\ No newline at end of file