Library to read and write Azoteq IQS6xx device registers via I2C.
Dependents: IQS620_HelloWorld IQS622_HelloWorld IQS624_HelloWorld IQS621_HelloWorld ... more
Library: IQS62x
Library to read and write Azoteq IQS6xx device registers via I2C.
Supported Devices
Handy Table of ProxFusion Device Features
ALS = Ambient Light Sensor PIR = Passive Infrared
IQS62x.h
- Committer:
- AzqDev
- Date:
- 2017-05-12
- Revision:
- 7:5e7ea07265d9
- Parent:
- 6:89bdb6f6a5c1
- Child:
- 10:8fdac52881aa
File content as of revision 7:5e7ea07265d9:
// A class library for Azoteq IQS62x devices // More info on IQS624 sensor IC: http://www.azoteq.com/products/proxfusion/iqs624?mbed // IQS624 1-minute youtube video: http://bit.ly/IQS624Video #include "mbed.h" // Verify these 3 pin definitions if your hardware is not on the list of tested boards #if defined (TARGET_LPC1768) || defined (TARGET_LPC11U24) #define IQS_I2C_CLOCK_PIN p27 /* on LPC1768/LPC11U24 this is marked as p10 */ #define IQS_I2C_DATA_PIN p28 /* on LPC1768/LPC11U24 this is marked as p9 */ #define IQS_READY_PIN p26 /* on LPC1768/LPC11U24 this is marked as p8 */ #else // If your board has an Arduino interface the definitions below will likely work, also works for Teensy #define IQS_I2C_CLOCK_PIN I2C_SCL /* on NUCLEO boards this is marked as SCL/D15 on CN5 */ #define IQS_I2C_DATA_PIN I2C_SDA /* on NUCLEO boards this is marked as SDA/D14 on CN5 */ #define IQS_READY_PIN D2 /* on NUCLEO boards this is marked as D2 on CN9 */ #endif #define I2C_ADR (0x44 << 1) /* I2C address of IQS62x */ #define I2CSPEED 100000 /* I2C clock speed */ #define NUMBER_OF_REGISTERS 224 /* number of registers to read from IQS62x */ #define I2CBufferSize 256 /* size of I2C read buffer */ class IQS62xIO { // basic IQS62x block read and write public: I2C i2c; // I2C interface DigitalIn IQSready; // ready pin const static int I2Cspeed = I2CSPEED; // I2C clock rate int I2CErrorCount; // number of I2C errors char I2CBuffer [I2CBufferSize]; // I2C read buffer char * registers; // pointer to I2C read buffer IQS62xIO(); // constructor void writeRegister(int address, int data); // write a byte to a register void configure(); // write configuration registers of the IQS62x void readAll(); // read all registers from the IQS62x void waitForReady(); // wait for IQS62x ready signal };