Mbed Discussions

ForumTopicsPostsLast post
MMA8652 Accelerometer
The MMA8652 is a 12 bit, 3 axis accelerometer
2 9 21 Apr 2017 by Jens Algner
Embedded Artist Cellular and Positioning Shield
Cellular and Positioning Shield compatible with most arduino mbed enabled boards, driver compatible with C027.
3 11 06 Jun 2016 by Marc BUSSON
High power stepper motor driver expansion board based on powerSTEP01.
1 1 08 Jun 2017 by Hartmut Geisel
Adafruit Ultimate GPS Breakout v3
Serial GPS module with onboard memory for continuous recording
1 3 03 Aug 2016 by Aymen Dhaker
MMA8451Q Accelerometer
How to use the MMA8451Q Accelerometer, the KL25Z Freedom Board's on-board Accelerometer
1 1 03 Sep 2014 by Deepi R
Seeed Studio SD Card shield V4.0
The Seeed Studio SD card V4.0 shield is Arduino compatible and with modifications it will work with the Freescale FRDM-KL25Z platform. It supports SD, SDHC and Micro SD cards.
1 3 20 Aug 2014 by Roman Kuzmin
TMP102 Temperature Sensor
The TMP102 is an I2C digital temperature sensor in a small SOT563 package, with a 0.0625C resolution and 0.5C accuracy.
1 1 06 Apr 2016 by Feleke Demissie
The SX1276MB1MAS and SX1276LB1LAS are both fitted with the SX1276 transceiver which, added to a high-performance FSK / OOK RF transceiver modem, features the LoRa™ long range modem.
1 1 20 Apr 2017 by Sripriyan Chinnamani
ADXL345 Accelerometer
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interfa
1 2 02 Nov 2015 by Mohan gandhi Vinnakota
Grove GPS
This Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 (U-blox 6 is old version) and serial communication configuration. It features 22 tracking / 66 acquisition channel GPS receiver.
1 1 04 Jan 2017 by Arona SOW
Embedded Artists GPS Receiver Board
The GPS Receiver Board is a high-quality GPS module with a built in antenna. It can track up to 22 satellites on 66 channels and has an excellent high-sensitivity receiver. The module is based on the popular XBee(TM) form factor.
1 1 16 Apr 2014 by Julian Cox
Grove - 4 Digit Display
Grove - 4 Digit Display uses TM1637 to control 4 seven-segment display with two pins(clk, dio) interface. It's a nice choose for time display, stopwatch and sensor data display.
1 3 29 Feb 2016 by Haming Bird
The X-NUCLEO-NFC01A1 is a Dynamic NFC tag evaluation board to allow expansion of the STM32 Nucleo boards.
1 2 08 Aug 2017 by Nicola Capovilla
ST Nucleo Bluetooth Expansion
Bluetooth low energy expansion board based on BlueNRG for STM32 Nucleo
1 1 03 Nov 2014 by Peter Drescher
Flex Sensor
How to use the Sparkfun Flex Sensors (https://www.sparkfun.com/products/10264 or similar), using the analog inputs of the mbed.
1 1 06 May 2017 by Khananard Khamphan
Grove - Ear-clip Heart Rate Sensor
Heart rate ear clip kit contain a ear clip and a receiver module.
1 1 20 Oct 2015 by Ram Kumar Koppu
SNIC UART Interface library: Serial to Wi-Fi library for Murata TypeYD Wi-Fi module.
1 1 08 Feb 2016 by Ram Kumar Koppu
3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer IMU
1 1 26 Aug 2016 by jim hamblen
Adafruit NeoPixels
WS2812-based addressable RGB LEDs.
1 3 10 Nov 2014 by Eric Palmer
mbed Application Shield
The new application shield has been designed to enable the maximum number of potential experiments with Arduino form factor development boards, keeping as much in common with the mbed application board as possible.
1 3 07 May 2017 by Gavin Hull
The DS1820, DS1822 and DS18B20 are one-wire temperature sensors with 9-12 bit resolution, which can operate using only two wires (ground and data).
1 2 06 Jan 2017 by Kiraly Stefan Istvan
Dynamics Measurement Unit
1 2 21 Nov 2014 by Kirill Meretskoi
Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo.
1 2 09 Sep 2016 by Mridupawan Das
Stepper motor (bipolar)
A bipolar stepper motor driving pulse generator
1 1 14 Oct 2016 by Robin Clark
X-NUCLEO-IDB05A1 Bluetooth Low Energy
The X-NUCLEO-IDB05A1 is a Bluetooth Low Energy evaluation board based on the SPBTLE-RF BlueNRG-MS RF module.
2 3 20 Jan 2016 by Andrea Palmieri
X-NUCLEO-PLC01A1 Programmable Logic Controller
The X-NUCLEO-PLC01A1 is an industrial input/output expansion board based on VNI8200XP and CLT01-38SQ7 components.
2 1 29 Nov 2016 by kaled saleh
The uVGA II from 4D Systems is a low-cost VGA controller on a breakout board.
1 1 21 Apr 2017 by Yusuf Kuris
The X-NUCLEO-IKS01A1 is a motion MEMS and environmental sensor evaluation board system.
5 9 08 Dec 2016 by DOUG BELL
The SX1272MB2xAS is fitted with the SX1272 transceiver which, added to a high-performance FSK / OOK RF transceiver modem, features the LoRa™ long range modem.
1 2 20 Jan 2017 by Dimitris Mamalis

Recent forum activity

» See more forum activity

» See all site activity