An abstract interface for connecting to a network and getting information from it. More...

#include <CellularNetwork.h>

Inheritance diagram for CellularNetwork:

Data Structures
struct	operator_names_t
	Cellular operator names in numeric and alpha format. More...

struct	operator_t
	3GPP TS 27.007 - 7.3 PLMN selection +COPS More...

struct	registration_params_t
	Network registration information. More...

Public Types

Public Member Functions
virtual nsapi_error_t	set_registration (const char *plmn=0)=0
	Request registering to network. More...

virtual nsapi_error_t	get_network_registering_mode (NWRegisteringMode &mode)=0
	Get the current network registering mode. More...

virtual nsapi_error_t	set_registration_urc (RegistrationType type, bool on)=0
	Activate/deactivate listening of network events for the given RegistrationType. More...

virtual nsapi_error_t	set_attach ()=0
	Request attach to network. More...

virtual nsapi_error_t	get_attach (AttachStatus &status)=0
	Request attach status from network. More...

virtual nsapi_error_t	detach ()=0
	Request detach and deregister from a network. More...

virtual nsapi_error_t	set_access_technology (RadioAccessTechnology rat)=0
	Sets radio access technology. More...

virtual nsapi_error_t	scan_plmn (operList_t &operators, int &ops_count)=0
	Scans for operators module can reach. More...

virtual nsapi_error_t	set_ciot_optimization_config (CIoT_Supported_Opt supported_opt, CIoT_Preferred_UE_Opt preferred_opt, Callback< void(CIoT_Supported_Opt)> network_support_cb)=0
	Set CIoT optimizations. More...

virtual nsapi_error_t	get_ciot_ue_optimization_config (CIoT_Supported_Opt &supported_opt, CIoT_Preferred_UE_Opt &preferred_opt)=0
	Get UE CIoT optimizations. More...

virtual nsapi_error_t	get_ciot_network_optimization_config (CIoT_Supported_Opt &supported_network_opt)=0
	Get Network CIoT optimizations. More...

virtual int	get_3gpp_error ()=0
	Get the last 3GPP error code. More...

virtual nsapi_error_t	get_operator_params (int &format, operator_t &operator_params)=0
	Get the operator parameters. More...

virtual void	attach (mbed::Callback< void(nsapi_event_t, intptr_t)> status_cb)=0
	Register callback for status reporting. More...

virtual nsapi_error_t	get_operator_names (operator_names_list &op_names)=0
	Read operator names. More...

virtual bool	is_active_context (int *number_of_active_contexts=NULL, int cid=-1)=0
	Check if there is any PDP context active. More...

virtual nsapi_error_t	get_registration_params (registration_params_t &reg_params)=0
	Gets the latest received registration parameters from the network: type, status, access technology, cell_id, lac, active_time, periodic_tau. More...

virtual nsapi_error_t	get_registration_params (RegistrationType type, registration_params_t &reg_params)=0
	Gets the current network registration parameters from the network with type: status, access technology, cell_id, lac, active_time, periodic_tau. More...

virtual nsapi_error_t	set_packet_domain_event_reporting (bool on)
	Sets the packet domain network reporting. More...

Detailed Description

An abstract interface for connecting to a network and getting information from it.

Definition at line 39 of file CellularNetwork.h.

Member Enumeration Documentation

enum EDRXAccessTechnology

Set discontinuous reception time on cellular device.

Remarks: See 3GPP TS 27.007 eDRX for details.

Parameters

mode	disable or enable the use of eDRX
act_type	type of access technology
edrx_value	requested edxr value. Extended DRX parameters information element.

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Definition at line 379 of file CellularNetwork.h.

enum NWRegisteringMode

Network registering mode.

Definition at line 156 of file CellularNetwork.h.

enum SignalQuality

Get signal quality parameters.

Parameters

rssi	signal strength level as defined in 3GPP TS 27.007, range -113..-51 dBm or SignalQualityUnknown
ber	bit error rate as RXQUAL as defined in 3GPP TS 45.008, range 0..7 or SignalQualityUnknown

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on other failures

Definition at line 297 of file CellularNetwork.h.

Member Function Documentation

virtual void attach ( mbed::Callback< void(nsapi_event_t, intptr_t)> status_cb )

pure virtual

Register callback for status reporting.

The specified status callback function will be called on status changes on the network. The parameters on the callback are the event type and event-type dependent reason parameter.

Remarks: Application should not call attach if using CellularContext class. Call instead CellularContext::attach as CellularDevice is dependent of this attach if CellularContext/CellularDevice is used to get device/sim ready, registered, attached, connected.

Parameters

status_cb The callback for status changes

Implemented in AT_CellularNetwork.

virtual nsapi_error_t detach ( )

pure virtual

Request detach and deregister from a network.

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual int get_3gpp_error ( )

pure virtual

Get the last 3GPP error code.

Returns: see 3GPP TS 27.007 error codes

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_attach ( AttachStatus & status )

pure virtual

Request attach status from network.

Parameters

status see AttachStatus values

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_ciot_network_optimization_config ( CIoT_Supported_Opt & supported_network_opt )

pure virtual

Get Network CIoT optimizations.

Parameters

supported_network_opt Supported CIoT EPS optimizations. CIOT_OPT_MAX will be returned, if the support is not known

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_ciot_ue_optimization_config	(	CIoT_Supported_Opt &	supported_opt,
		CIoT_Preferred_UE_Opt &	preferred_opt
	)

pure virtual

Get UE CIoT optimizations.

Parameters

supported_opt	Supported CIoT EPS optimizations.
preferred_opt	Preferred CIoT EPS optimizations.

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_network_registering_mode ( NWRegisteringMode & mode )

pure virtual

Get the current network registering mode.

Parameters

mode	on successful return contains the current network registering mode

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_operator_names ( operator_names_list & op_names )

pure virtual

Read operator names.

Parameters

op_names on successful return contains linked list of operator names.

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_NO_MEMORY on memory failure NSAPI_ERROR_DEVICE_ERROR on other failures

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_operator_params	(	int &	format,
		operator_t &	operator_params
	)

pure virtual

Get the operator parameters.

Parameters

format	format of the operator field
operator_params	applicable operator param fields filled

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on case of other failures

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_registration_params ( registration_params_t & reg_params )

pure virtual

Gets the latest received registration parameters from the network: type, status, access technology, cell_id, lac, active_time, periodic_tau.

Parameters

reg_params see registration_params_t

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t get_registration_params	(	RegistrationType	type,
		registration_params_t &	reg_params
	)

pure virtual

Gets the current network registration parameters from the network with type: status, access technology, cell_id, lac, active_time, periodic_tau.

Parameters

type	see RegistrationType values
reg_params	see registration_params_t

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_UNSUPPORTED if the modem does not support RegistrationType NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual bool is_active_context	(	int *	number_of_active_contexts = `NULL`,
		int	cid = `-1`
	)

pure virtual

Check if there is any PDP context active.

If cid is given, then check is done only for that cid.

Parameters

number_of_active_contexts	If given then in return contains the number of all active contexts
cid	If given then check if the context with this cid is active

Returns: true if any (or the given cid) context is active, false otherwise or in case of error

Implemented in AT_CellularNetwork.

virtual nsapi_error_t scan_plmn	(	operList_t &	operators,
		int &	ops_count
	)

pure virtual

Scans for operators module can reach.

Parameters

operators	Container of reachable operators and their access technologies
ops_count	Number of found operators

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_NO_MEMORY on memory failure NSAPI_ERROR_DEVICE_ERROR on other failures

Implemented in AT_CellularNetwork.

virtual nsapi_error_t set_access_technology ( RadioAccessTechnology rat )

pure virtual

Sets radio access technology.

Parameters

rat	Radio access technology

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_UNSUPPORTED if the given rat is RAT_UNKNOWN or inheriting target class has not implemented method set_access_technology_impl(...) OR return value of the inheriting target class set_access_technology_impl(...)

virtual nsapi_error_t set_attach ( )

pure virtual

Request attach to network.

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t set_ciot_optimization_config	(	CIoT_Supported_Opt	supported_opt,
		CIoT_Preferred_UE_Opt	preferred_opt,
		Callback< void(CIoT_Supported_Opt)>	network_support_cb
	)

pure virtual

Set CIoT optimizations.

Parameters

supported_opt	Supported CIoT EPS optimizations (the HW support can be checked with get_ciot_ue_optimization_config).
preferred_opt	Preferred CIoT EPS optimizations.
network_support_cb	This callback will be called when CIoT network optimization support is known

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t set_packet_domain_event_reporting ( bool on )

virtual

Sets the packet domain network reporting.

Useful for getting events when detached from the network. When detach event arrives it is propagated as NSAPI_STATUS_DISCONNECTED to callback set with attach(...).

Parameters

on	true for enabling event reporting, false for disabling

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_UNSUPPORTED is command is not supported by the modem NSAPI_ERROR_DEVICE_ERROR on failure

Reimplemented in AT_CellularNetwork.

Definition at line 397 of file CellularNetwork.h.

virtual nsapi_error_t set_registration ( const char * plmn = 0 )

pure virtual

Request registering to network.

Parameters

plmn	format is in numeric format or 0 for automatic network registration

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

virtual nsapi_error_t set_registration_urc	(	RegistrationType	type,
		bool	on
	)

pure virtual

Activate/deactivate listening of network events for the given RegistrationType.

This should be called after network class is created and ready to receive AT commands. After successful call network class starts to get information about network changes like registration statue, access technology, cell id...

Parameters

type	RegistrationType to set urc on/off
on	Controls are urc active or not

Returns: NSAPI_ERROR_OK on success NSAPI_ERROR_UNSUPPORTED if the modem does not support RegistrationType NSAPI_ERROR_DEVICE_ERROR on failure

Implemented in AT_CellularNetwork.

Data Structures

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Important Information for this Arm website