Mistake on this page?
Report an issue in GitHub or email us

SecurityManager

SecurityManager deals with authentication and encryption for the Bluetooth Low Energy link. The pairing and optionally bonding processes provide this. The SecurityManager achieves bonding by saving the pairing information and reusing it on subsequent reconnections. This saves time because the pairing does not have to be performed again.

The pairing process may produce a set of keys to be used during current or later connections. The SecurityManager handles these, and they include the Long Term Encryption Key (LTK), the Identity Resolving Key (IRK) and the Connection Signature Resolving Key (CSRK). The SecurityManager uses the LTK to encrypt subsequent connections without having to pair again. The Link Controller uses IRK to identify peers who use random resolvable addresses. The application uses CSRK to sign and authenticate signed data.

The pairing process may provide man-in-the-middle protection (MITM). The SecurityManager achieves this through various means, including out of band communication, depending on the capabilities of the local and peer device.

The SecurityManager stores the keys, permanently if possible, to speed security requests on subsequent connections.

Security requests may come explicitly from the user application or implicitly from the GATT server based on attribute requirements.

Pairing

There are several ways to provide different levels of security during pairing depending on your requirements and the facilities the application provides. The process starts with initializing the SecurityManager with default options for new connections. You can later change some settings per link or globally.

The important settings in the init() function are the MITM requirement and IO capabilities. MITM protection prevents an attack where one device can impersonate another device by pairing with both devices at the same time. You can achieve this protection by sharing information between the devices through an independent channel. The IO capabilities of both devices dictate what algorithm is used. For details, see BLUETOOTH SPECIFICATION Version 5.0 | Vol 3, Part H - 2.3.5.1. You can change the IO capabilities after initialization with setIoCapability(). This takes effect for all subsequent pairings.

Secure Connections, which relies on elliptical curve cryptography, provides the most secure pairing. Support for Secure Connections depends on both the stack and controller on both sides supporting it. If either side doesn't support it, legacy pairing is used. This is an older standard of pairing. If you require higher security, you can disable legacy pairing by calling allowLegacyPairing(false);.

Out of band (OOB) data used in pairing

Sharing this information through IO capabilities means user interaction, which limits the degree of protection due to the limit of the amount of data that you can expect to transfer. Another solution is using out of band (OOB) communication to transfer this data. OOB communication can send more data and make MITM attacks less likely to succeed. The application must exchange OOB data and provide it to the SecurityManager. Use setOOBDataUsage() to indicate you want to use it. With this same call, you can set whether the communication channel you are using to transmit the OOB data is itself secure against MITM protection - this sets the level of the link security achieved using pairing that uses this data.

Signing

Applications may require a level of security providing confidence that data transfers are coming from a trusted source. You can achieve this by encrypting the link, which also provides added confidentiality. Encryption is a good choice when a device stays connected but introduces latency due to the need for encrypting the link if the device only connects periodically to transfer data. If you do not require confidentiality, the GATT server may allow writes to happen over an unencrypted link but authenticated by a signature present in each packet. This signature relies on having sent a signing key to the peer during pairing prior to sending any signed packets.

Persistence of security information

SecurityManager stores all the data required for its operation on active links. Depending on resources available on the device, it also stores data for disconnected devices, which have bonded to be reused when reconnected. If the application has initialized a file system and the SecurityManager has received a file path during the init() call, SecurityManager may also provide data persistence across resets. You must enable this by calling preserveBondingStateOnReset(). Persistence may fail if abnormally terminated. SecurityManager may also fall back to a nonpersistent implementation if the resources are too limited.

How to use

Call init() with your chosen settings before calling any other SecurityManager functions.

The SecurityManager communicates with your application through events. These trigger calls in the EventHandler that you must provide by calling the setSecurityManagerEventHandler() function.

The most important process is pairing. You may trigger this manually by calling requestPairing(). Pairing may also result from the application requiring encryption by calling setLinkEncryption() or the application requiring MITM protection through requestAuthentication().

You can call all of these implicitly by using setLinkSecurity() to set the required security for the link. The SecurityManager triggers the process required to achieve the set security level. You can only escalate the security level; asking the SecurityManager for a lower security level than the existing one does not fail, but results in an event informing the application through linkEncryptionResult() of the current level (which remains unchanged).

The chosen pairing algorithms depend on the IO capabilities and OOB use settings. They produce appropriate events, which your EventHandler must handle. If your event handler doesn't support all the calls, you must not set IO capabilities or set OOB use in such a way that would trigger them, or else the pairing fails (usually by timing out).

The simplest example is a pairing of a device with no IO capabilities and no OOB data available. This does not provide any MITM protection. The pairing (triggered implicitly or called explicitly) results in the generation of an event on the peer calling pairingRequest(). The event handler must make a decision (either in the application itself or based on user interaction) whether to accept the pairing and call acceptPairing() or cancelPairing(). An event calling pairingResult() in the EventHandler communicates te result on both peers.

SecurityManager class reference

Data Structures
class  EventHandler
 The stack will use these functions to signal events to the application, subclass to override handlers. More...
Public Types
typedef uint8_t Passkey_t[PASSKEY_LEN]
 6-digit passkey in ASCII ('0'-'9' digits only). More...
Public Member Functions
ble_error_t init (bool enableBonding=true, bool requireMITM=true, SecurityIOCapabilities_t iocaps=IO_CAPS_NONE, const Passkey_t passkey=nullptr, bool signing=true, const char *dbFilepath=nullptr)
 Enable the BLE stack's Security Manager. More...
ble_error_t setDatabaseFilepath (const char *dbFilepath=nullptr)
 Change the file used for the security database. More...
ble_error_t reset ()
 Notify all registered onShutdown callbacks that the SecurityManager is about to be shutdown and clear all SecurityManager state of the associated object. More...
ble_error_t preserveBondingStateOnReset (bool enable)
 Normally all bonding information is lost when device is reset, this requests that the stack attempts to save the information and reload it during initialisation. More...
ble_error_t writeBondingStateToPersistentStorage ()
 Some or all of bonding information may be stored in memory while in use. More...
ble_error_t purgeAllBondingState ()
 Delete all peer device context and all related bonding information from the database within the security manager. More...
ble_error_t generateWhitelistFromBondTable (::ble::whitelist_t *whitelist) const
 Create a list of addresses from all peers in the bond table and generate an event which returns it as a whitelist. More...
ble_error_t requestPairing (ble::connection_handle_t connectionHandle)
 Request pairing with the peer. More...
ble_error_t acceptPairingRequest (ble::connection_handle_t connectionHandle)
 Accept the pairing request. More...
ble_error_t cancelPairingRequest (ble::connection_handle_t connectionHandle)
 Reject pairing request if the local device is the slave or cancel an outstanding pairing request if master. More...
ble_error_t setPairingRequestAuthorisation (bool required=true)
 Tell the stack whether the application needs to authorise pairing requests or should they be automatically accepted. More...
ble_error_t getPeerIdentity (ble::connection_handle_t connectionHandle)
 Retrieve identity address for the peer on the given connection. More...
ble_error_t allowLegacyPairing (bool allow=true)
 Allow or disallow the use of legacy pairing in case the application only wants to force the use of Secure Connections. More...
ble_error_t getSecureConnectionsSupport (bool *enabled)
 Check if the Secure Connections feature is supported by the stack and controller. More...
ble_error_t setIoCapability (SecurityIOCapabilities_t iocaps)
 Set the IO capability of the local device. More...
ble_error_t setDisplayPasskey (const Passkey_t passkey)
 Set the passkey that is displayed on the local device instead of using a randomly generated one. More...
ble_error_t setLinkSecurity (ble::connection_handle_t connectionHandle, SecurityMode_t securityMode)
 Set the security mode on a connection. More...
ble_error_t setKeypressNotification (bool enabled=true)
 Set whether or not we want to send and receive keypress notifications during passkey entry. More...
ble_error_t enableSigning (ble::connection_handle_t connectionHandle, bool enabled=true)
 Request generation and exchange of signing keys so that packet signing can be utilised on this connection. More...
ble_error_t setHintFutureRoleReversal (bool enable=true)
 Give a hint to the stack that the master/slave role might change in the future. More...
ble_error_t getLinkEncryption (ble::connection_handle_t connectionHandle, ble::link_encryption_t *encryption)
 Current state of encryption on the link. More...
ble_error_t setLinkEncryption (ble::connection_handle_t connectionHandle, ble::link_encryption_t encryption)
 Enabled or disable encryption on the link. More...
ble_error_t setEncryptionKeyRequirements (uint8_t minimumByteSize, uint8_t maximumByteSize)
 Set the requirements for encryption key size. More...
ble_error_t getEncryptionKeySize (connection_handle_t connectionHandle, uint8_t *size)
 Get encryption key size for given connection. More...
ble_error_t requestAuthentication (ble::connection_handle_t connectionHandle)
 Request that the link be authenticated (keys with MITM protection). More...
ble_error_t generateOOB (const ble::address_t *address)
 Generate OOB data with the given address. More...
ble_error_t setOOBDataUsage (ble::connection_handle_t connectionHandle, bool useOOB, bool OOBProvidesMITM=true)
 Enable OOB data usage during paring. More...
ble_error_t confirmationEntered (ble::connection_handle_t connectionHandle, bool confirmation)
 Report to the stack if the passkey matches or not. More...
ble_error_t passkeyEntered (ble::connection_handle_t connectionHandle, Passkey_t passkey)
 Supply the stack with the user entered passkey. More...
ble_error_t sendKeypressNotification (ble::connection_handle_t connectionHandle, ble::Keypress_t keypress)
 Send a notification to the peer that the user pressed a key on the local device. More...
ble_error_t legacyPairingOobReceived (const ble::address_t *address, const ble::oob_tk_t *tk)
 Supply the stack with the OOB data for legacy connections. More...
ble_error_t oobReceived (const ble::address_t *address, const ble::oob_lesc_value_t *random, const ble::oob_confirm_t *confirm)
 Supply the stack with the OOB data for secure connections. More...
ble_error_t getSigningKey (ble::connection_handle_t connectionHandle, bool authenticated)
 Retrieves a signing key through a signingKey event. More...
ble_error_t setPrivateAddressTimeout (uint16_t timeout_in_seconds)
 Sets how often the address is rotated when privacy is enabled. More...
void onShutdown (const SecurityManagerShutdownCallback_t &callback)
 Setup a callback to be invoked to notify the user application that the SecurityManager instance is about to shutdown (possibly as a result of a call to BLE::shutdown()). More...
SecurityManagerShutdownCallbackChain_tonShutdown ()
 Provide access to the callchain of shutdown event callbacks. More...
void setSecurityManagerEventHandler (EventHandler *handler)
 Assign the event handler implementation that will be used by the stack to signal events back to the application. More...
Static Public Attributes
static const unsigned PASSKEY_LEN = 6
 Declaration of type containing a passkey to be used during pairing. More...

SecurityManager example

The SecurityManager example demonstrates both a central and a peripheral connecting, performing basic pairing and setting up link security.

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <events/mbed_events.h>
#include "ble/BLE.h"
#include "pretty_printer.h"
#include "mbed-trace/mbed_trace.h"

#if MBED_CONF_APP_FILESYSTEM_SUPPORT
#include "LittleFileSystem.h"
#include "HeapBlockDevice.h"
#endif //MBED_CONF_APP_FILESYSTEM_SUPPORT

/** This example demonstrates all the basic setup required for pairing and setting
 *  up link security both as a central and peripheral. It also demonstrates privacy
 *  features in Gap. It shows how to use private addresses when advertising and
 *  connecting and how filtering ties in with these operations.
 *
 *  The application will start by repeatedly trying to connect to the same
 *  application running on another board. It will do this by advertising and
 *  scanning for random intervals waiting until the difference in intervals
 *  between the boards will make them meet when one is advertising and the
 *  other scanning.
 *
 *  Two devices will be operating using random resolvable addresses. The
 *  applications will connect to the peer and pair. It will attempt bonding
 *  to store the IRK that resolve the peer. Subsequent connections will
 *  turn on filtering based on stored IRKs.
 */

static const char DEVICE_NAME[] = "SecurityDemo";

using std::literals::chrono_literals::operator""ms;

/* Delay between steps */
static const std::chrono::milliseconds delay = 3000ms;

/** Base class for both peripheral and central. The same class that provides
 *  the logic for the application also implements the SecurityManagerEventHandler
 *  which is the interface used by the Security Manager to communicate events
 *  back to the applications. You can provide overrides for a selection of events
 *  your application is interested in.
 */
class SecurityDemo : private mbed::NonCopyable<SecurityDemo>,
                     public SecurityManager::EventHandler,
                     public ble::Gap::EventHandler
{
public:
    SecurityDemo(BLE &ble, events::EventQueue &event_queue) :
        _ble(ble), _event_queue(event_queue) { };

    virtual ~SecurityDemo()
    {
        _ble.onEventsToProcess(nullptr);
    };

    /** Start BLE interface initialisation */
    void run()
    {
        /* this will inform us off all events so we can schedule their handling
         * using our event queue */
        _ble.onEventsToProcess(makeFunctionPointer(this, &SecurityDemo::schedule_ble_events));

        /* handle gap events */
        _ble.gap().setEventHandler(this);

        if (_ble.hasInitialized()) {
            /* ble instance already initialised, skip init and start activity */
            start();
        } else {
            ble_error_t error = _ble.init(this, &SecurityDemo::on_init_complete);

            if (error) {
                print_error(error, "Error returned by BLE::init.\r\n");
                return;
            }
        }

        /* this will not return until shutdown */
        _event_queue.dispatch_forever();
    };

    /** Override to start chosen activity when the system starts */
    virtual void start() = 0;

    /* callbacks */

    /** This is called when BLE interface is initialised and starts the demonstration */
    void on_init_complete(BLE::InitializationCompleteCallbackContext *event)
    {
        ble_error_t error;

        if (event->error) {
            printf("Error during the initialisation\r\n");
            return;
        }

        /* for use by tools we print out own address and also use it
         * to seed RNG as the address is unique */
        print_local_address();


		/* This path will be used to store bonding information but will fallback
         * to storing in memory if file access fails (for example due to lack of a filesystem) */
        const char* db_path = "/fs/bt_sec_db";

        error = _ble.securityManager().init(
            /* enableBonding */ true,
            /* requireMITM */ false,
            /* iocaps */ SecurityManager::IO_CAPS_NONE,
            /* passkey */ nullptr,
            /* signing */ false,
            /* dbFilepath */ db_path
        );

        if (error) {
            print_error(error, "Error during initialising security manager\r\n");
            return;
        }

        /* This tells the stack to generate a pairingRequest event which will require
         * this application to respond before pairing can proceed. Setting it to false
         * will automatically accept pairing. */
        _ble.securityManager().setPairingRequestAuthorisation(true);

#if MBED_CONF_APP_FILESYSTEM_SUPPORT
        error = _ble.securityManager().preserveBondingStateOnReset(true);

        if (error) {
            print_error(error, "Error during preserveBondingStateOnReset %d\r\n");
        }
#endif // MBED_CONF_APP_FILESYSTEM_SUPPORT

        /* this demo switches between being master and slave */
        _ble.securityManager().setHintFutureRoleReversal(true);

        /* Tell the security manager to use methods in this class to inform us
         * of any events. Class needs to implement SecurityManagerEventHandler. */
        _ble.securityManager().setSecurityManagerEventHandler(this);

        /* gap events also handled by this class */
        _ble.gap().setEventHandler(this);

        error = _ble.gap().enablePrivacy(true);
        if (error) {
            print_error(error, "Error enabling privacy.\r\n");
            return;
        }

        /* continuation is in onPrivacyEnabled() */
    };

    /** Schedule processing of events from the BLE in the event queue. */
    void schedule_ble_events(BLE::OnEventsToProcessCallbackContext *context)
    {
        _event_queue.call([&ble_instance = context->ble] { ble_instance.processEvents(); });
    };

private:
    /* SecurityManager Event handler */

    /** Respond to a pairing request. This will be called by the stack
     * when a pairing request arrives and expects the application to
     * call acceptPairingRequest or cancelPairingRequest */
    void pairingRequest(ble::connection_handle_t connectionHandle) override
    {
        printf("Pairing requested - authorising\r\n");
        _ble.securityManager().acceptPairingRequest(connectionHandle);
    }

    /** Inform the application of pairing */
    void pairingResult(
        ble::connection_handle_t connectionHandle,
        SecurityManager::SecurityCompletionStatus_t result
    ) override
    {
        if (result == SecurityManager::SEC_STATUS_SUCCESS) {
            printf("Pairing successful\r\n");
            _bonded = true;
        } else {
            printf("Pairing failed\r\n");
        }

        _event_queue.call_in(
            delay,
            [this, connectionHandle] {
                _ble.gap().disconnect(connectionHandle, ble::local_disconnection_reason_t::USER_TERMINATION);
            }
        );
    }

    /** Inform the application of change in encryption status. This will be
      * communicated through the serial port */
    void linkEncryptionResult(ble::connection_handle_t connectionHandle, ble::link_encryption_t result) override
    {
        if (result == ble::link_encryption_t::ENCRYPTED) {
            printf("Link ENCRYPTED\r\n");
        } else if (result == ble::link_encryption_t::ENCRYPTED_WITH_MITM) {
            printf("Link ENCRYPTED_WITH_MITM\r\n");
        } else if (result == ble::link_encryption_t::NOT_ENCRYPTED) {
            printf("Link NOT_ENCRYPTED\r\n");
        }
    }

    void onPrivacyEnabled() override
    {
        /* all initialisation complete, start our main activity */
        start();
    }

    /* Gap Event handler */

    /** This is called by Gap to notify the application we connected */
    void onConnectionComplete(const ble::ConnectionCompleteEvent &event) override
    {
        printf("Connected to peer: ");
        print_address(event.getPeerAddress().data());
        if (event.getPeerResolvablePrivateAddress() != ble::address_t()) {
            printf("Peer random resolvable address: ");
            print_address(event.getPeerResolvablePrivateAddress().data());
        }

        _handle = event.getConnectionHandle();

        if (_bonded) {
            /* disconnect in 2s */
            _event_queue.call_in(
                delay,
                [this] {
                    _ble.gap().disconnect(_handle, ble::local_disconnection_reason_t::USER_TERMINATION);
                }
            );
        } else {
            /* start bonding */
            ble_error_t error = _ble.securityManager().setLinkSecurity(
                _handle,
                SecurityManager::SECURITY_MODE_ENCRYPTION_NO_MITM
            );
            if (error) {
                print_error(error, "Failed to set link security\r\n");
                _ble.gap().disconnect(_handle, ble::local_disconnection_reason_t::USER_TERMINATION);
            }
        }
    };

    /** This is called by Gap to notify the application we disconnected */
    void onDisconnectionComplete(const ble::DisconnectionCompleteEvent &event) override
    {
        if (_bonded) {
            /* we have connected to and bonded with the other device, from now
             * on we will use the second start function and stay in the same role
             * as peripheral or central */
            printf("Disconnected.\r\n\r\n");
            _event_queue.call_in(delay, [this] { start(); });
        } else {
            printf("Failed to bond.\r\n");
            _event_queue.break_dispatch();
        }
    };

    void onScanTimeout(const ble::ScanTimeoutEvent &) override
    {
        /* if we failed to find the other device, abort so that we change roles */
        printf("Haven't seen other device, switch modes.\r\n");
        _event_queue.break_dispatch();
    }

    void onAdvertisingEnd(const ble::AdvertisingEndEvent &event) override
    {
        if (!event.isConnected()) {
            printf("No device connected to us, switch modes.\r\n");
            _event_queue.break_dispatch();
        }
    }

private:
    void print_local_address()
    {
        /* show what address we are using now */
        ble::own_address_type_t addr_type;
        ble::address_t addr;
        _ble.gap().getAddress(addr_type, addr);
        printf("Device address: ");
        print_address(addr);
        static bool _seeded = false;
        if (!_seeded) {
            _seeded = true;
            /* use the address as a seed */
            uint8_t* random_data = addr.data();
            srand(*((unsigned int*)random_data));
        }
    }

protected:
    BLE &_ble;
    events::EventQueue &_event_queue;
    ble::connection_handle_t _handle = 0;
    bool _bonded = false;
};

/** A peripheral device will advertise and accept the connections */
class SecurityPeripheral : public SecurityDemo {
public:
    SecurityPeripheral(BLE &ble, events::EventQueue &event_queue)
        : SecurityDemo(ble, event_queue) { }

    /** Set up and start advertising accepting anyone */
    void start() override
    {
        ble::peripheral_privacy_configuration_t privacy_configuration = {
            /* use_non_resolvable_random_address */ false,
            ble::peripheral_privacy_configuration_t::PERFORM_PAIRING_PROCEDURE
        };

        if (_bonded) {
            /** advertise and filter based on known devices */
            printf("We are bonded, we will only accept known devices\r\n");
            privacy_configuration.resolution_strategy =
                ble::peripheral_privacy_configuration_t::REJECT_NON_RESOLVED_ADDRESS;
        }

        _ble.gap().setPeripheralPrivacyConfiguration(&privacy_configuration);

        start_advertising();
    };

private:
    void start_advertising()
    {
        uint8_t adv_buffer[ble::LEGACY_ADVERTISING_MAX_SIZE];
        /* use the helper to build the payload */
        ble::AdvertisingDataBuilder adv_data_builder(adv_buffer);

        adv_data_builder.setFlags();
        adv_data_builder.setName(DEVICE_NAME);

        /* Set payload for the set */
        ble_error_t error = _ble.gap().setAdvertisingPayload(
            ble::LEGACY_ADVERTISING_HANDLE,
            adv_data_builder.getAdvertisingData()
        );

        if (error) {
            print_error(error, "Gap::setAdvertisingPayload() failed");
            return;
        }

        ble::AdvertisingParameters adv_parameters(
            ble::advertising_type_t::CONNECTABLE_UNDIRECTED
        );

        error = _ble.gap().setAdvertisingParameters(ble::LEGACY_ADVERTISING_HANDLE, adv_parameters);

        if (error) {
            print_error(error, "Gap::setAdvertisingParameters() failed");
            return;
        }

        if (_bonded) {
            /* if we bonded it means we have found the other device, from now on
             * wait at each step until completion */
            error = _ble.gap().startAdvertising(ble::LEGACY_ADVERTISING_HANDLE);
        } else {
            /* since we have two boards which might start running this example at the same time
             * we randomise the interval of advertising to have them meet when one is advertising
             * and the other one is scanning (we use their random address as source of randomness) */
            ble::millisecond_t random_duration_ms((5 + rand() % 6) * 1000);
            ble::adv_duration_t random_duration(random_duration_ms);

            error = _ble.gap().startAdvertising(ble::LEGACY_ADVERTISING_HANDLE, random_duration);
        }

        if (error) {
            print_error(error, "Gap::startAdvertising() failed");
            return;
        }

        printf("Advertising...\r\n");
    }

};

/** A central device will scan and connect to a peer. */
class SecurityCentral : public SecurityDemo {
public:
    SecurityCentral(BLE &ble, events::EventQueue &event_queue)
        : SecurityDemo(ble, event_queue) { }

    /** start scanning and attach a callback that will handle advertisements
     *  and scan requests responses */
    void start() override
    {
        ble::central_privacy_configuration_t privacy_configuration = {
            /* use_non_resolvable_random_address */ false,
            ble::central_privacy_configuration_t::DO_NOT_RESOLVE
        };
        if (_bonded) {
            printf("We are bonded - we will only see known devices\r\n");
            privacy_configuration.resolution_strategy = ble::central_privacy_configuration_t::RESOLVE_AND_FILTER;
        }

        _ble.gap().setCentralPrivacyConfiguration(&privacy_configuration);

        start_scanning();
    }

    /* helper functions */
private:
    bool start_scanning()
    {
        ble_error_t error;
        ble::ScanParameters scan_params;
        _ble.gap().setScanParameters(scan_params);

        _is_connecting = false;

        if (_bonded) {
            /* if we bonded it means we have found the other device, from now on
             * wait at each step until completion */
            error = _ble.gap().startScan(ble::scan_duration_t::forever());
        } else {
            /* otherwise only scan for a limited time before changing roles again
             * if we fail to find the other device */
            error = _ble.gap().startScan(ble::scan_duration_t(ble::millisecond_t(5000)));
        }

        if (error) {
            print_error(error, "Error during Gap::startScan\r\n");
            return false;
        }

        printf("Scanning...\r\n");

        return true;
    }

private:
    /* Event handler */

    /** Look at scan payload to find a peer device and connect to it */
    void onAdvertisingReport(const ble::AdvertisingReportEvent &event) override
    {
        /* don't bother with analysing scan result if we're already connecting */
        if (_is_connecting) {
            return;
        }

        ble::AdvertisingDataParser adv_data(event.getPayload());

        /* parse the advertising payload, looking for a discoverable device */
        while (adv_data.hasNext()) {
            ble::AdvertisingDataParser::element_t field = adv_data.next();

            /* connect to a known device by name */
            if (field.type == ble::adv_data_type_t::COMPLETE_LOCAL_NAME &&
                field.value.size() == strlen(DEVICE_NAME) &&
                (memcmp(field.value.data(), DEVICE_NAME, field.value.size()) == 0)) {

                printf("We found a connectable device: \r\n");
                print_address(event.getPeerAddress().data());

                ble_error_t error = _ble.gap().stopScan();

                if (error) {
                    print_error(error, "Error caused by Gap::stopScan");
                    return;
                }

                error = _ble.gap().connect(
                    event.getPeerAddressType(),
                    event.getPeerAddress(),
                    ble::ConnectionParameters()
                );

                printf("Connecting...\r\n");

                if (error) {
                    print_error(error, "Error caused by Gap::connect");
                    return;
                }

                /* we may have already scan events waiting
                 * to be processed so we need to remember
                 * that we are already connecting and ignore them */
                _is_connecting = true;

                return;
            }
        }
    }

private:
    bool _is_connecting = false;
};

#if MBED_CONF_APP_FILESYSTEM_SUPPORT
bool create_filesystem()
{
    static LittleFileSystem fs("fs");

    /* replace this with any physical block device your board supports (like an SD card) */
    static HeapBlockDevice bd(4096, 256);

    int err = bd.init();

    if (err) {
        return false;
    }

    err = bd.erase(0, bd.size());

    if (err) {
        return false;
    }

    err = fs.mount(&bd);

    if (err) {
        /* Reformat if we can't mount the filesystem */
        printf("No filesystem found, formatting...\r\n");

        err = fs.reformat(&bd);

        if (err) {
            return false;
        }
    }

    return true;
}
#endif //MBED_CONF_APP_FILESYSTEM_SUPPORT

int main()
{
    mbed_trace_init();

    BLE& ble = BLE::Instance();
    events::EventQueue queue;

#if MBED_CONF_APP_FILESYSTEM_SUPPORT
    /* if filesystem creation fails or there is no filesystem the security manager
     * will fallback to storing the security database in memory */
    if (!create_filesystem()) {
        printf("Filesystem creation failed, will use memory storage\r\n");
    }
#endif

    while(true) {
        {
            printf("\r\n * Device is a peripheral *\r\n\r\n");
            SecurityPeripheral peripheral(ble, queue);
            peripheral.run();
        }
        {
            printf("\r\n * Device is a central *\r\n\r\n");
            SecurityCentral central(ble, queue);
            central.run();
        }
    }

    return 0;
}

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.