Components » W5500 Ethernet Kit for IoT

W5500 Ethernet Kit for IoT

W5500 Ethernet Kit for IoT is designed using the WIZnet W5500 chip. And compatible with Arduino and ARM mbed Platform.

Hello World

Import program W5500HelloWorld

TCP Echo example of W5500 Ethernet Kit for IoT.

Library

Import program W5500HelloWorld

TCP Echo example of W5500 Ethernet Kit for IoT.

Pinout

Notes

Examples

Nucleo_F103RB_W5500HelloWorld
Import program Nucleo_F103RB_W5500HelloWorld
TCP Echo example of W5500 Ethernet Kit for IoT, Test with Nucleo-F103RB
Last commit 17 May 2015 by WIZnet

Official Web site

Online Shop USA: http:www.shopwiznet.com
Online Shop Europe: http:shop.wiznet.eu
Online Shop Korea: http:shop.wiznet.co.kr
Wiki: http:wizwiki.net/wiki/doku.php?id=osh:w5500_ethernet_shield:start
Wiznet Homepage: http:www.wiznet.co.kr/

Available Board List

ARM mbed Board
ARM mbed Platform : ARM mbed platform Site
FRDM-KL25Z : Freescale
NXP LPC800-MAX : NXP
Arduino Board
Arduino board (e.g. the Uno, Mega, Due)
Arduino Leonardo
Arduino Leonardo ETH

Arduino-compatible Board
Seeeduino v3.0 : Based on Arduino Duemilanove

Feature

Suppport 3.3V / 5V
High Speed Ethernet controller W5500 chip
SPI interface
Internal 32Kbytes Tx/Rx buffer
10/100 Ethernet PHY embedded
Support Auto Negotiation (Full / Half duplex, 10 / 100-based)
Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
User Selectable GPIO pin
Support SD-card slot for storage
Support I2C, UART interface

Hardware Configuration

RJ-45 with Transformer : Ethernet Port
W5500 : a hardwired TCP/IP Ethernet Controller
RESET : Reset Ethernet shield and Arduino when pressed
SD-Slot : support Micro SD card in FAT16 or FAT32 ; (Please Read the Caution)
I2C : I2C interface
UART : UART interface

Pins usage on Arduino & ARM mbed

W5500 Ethernet shield is User Selectable GPIO

The user is able to use different Modules by changing Chip Select
Stackable : Possible to stack different modules

Caution) When the user uses 5V Platform, we cannot confirm a stable operation of SD-CARD. Therefore, though 5V Platform is safe to use after going through enough tests, it is highly recommended to mount buffer & 100nF Capacitor for a secure operation.

SPI Operation & Timing Diagram

SPI Operation

There is a W5500 inside W5500 Ethernet shield. Therefore SPI operation & Timing Diagram of Ethernet shield follows one of W5500. For more information about W5500 chip please also refer to the chip's datasheet: