Diff: main.cpp

Revision:

7:49a823b5a935

Parent:

5:9a0acd11c445

Child:

8:d5e340a59c71

--- a/main.cpp	Thu Dec 07 11:55:39 2017 +0000
+++ b/main.cpp	Wed Dec 13 10:09:44 2017 +0000
@@ -10,20 +10,33 @@
 #include "mbed.h"
 #include "esp8266.h"
 
-Serial ser2usb(PA_9, PA_10, 115200);
+Serial ser2usb(PA_2, PA_3, 115200);
 DigitalOut LED(PD_2);
+DigitalIn humansensor(PA_0); 
+
+int test_main(void){
+    Serial esp8266(PA_9, PA_10, 9600);
+    while(1){
+        if(ser2usb.readable())
+            esp8266.putc(ser2usb.getc());
+        if(esp8266.readable())
+            ser2usb.putc(esp8266.getc());
+    }
+}
 
 int main(void) {
+    
     // 选定与 esp8266 相连接的串口，WiFi 名称和密码
     // 参数分别为 TX pin / RX pin / SSID / Password
-    Esp8266 client(PA_2, PA_3, "TSINGHUA.iCenter", "TS.icenter");
+    Esp8266 client(PA_9, PA_10, "TSINGHUA.iCenter", "TS.icenter");
 
     //声明所有的传感器，每行一个，每个由名字、单位两部分组成，最后一行必须为空指针作为结尾
     //服务器收到声明后，将在网页上显示这些传感器
     const char* sensors[][2] = {
-        "pressure", "Pa",
-        "temperature", "C",
-        "humidity", "%",
+        //"pressure", "Pa",
+//        "temperature", "C",
+//        "humidity", "%",
+        "huamn","person",
         NULL, NULL //最后一行以空指针作为结束标记
     };
 
@@ -61,9 +74,10 @@
         if(t.read() - last_report > 1){ // 每1s发送汇报一次传感器数据
 
             //汇报传感器数据，两个参数分别是传感器名字和值
-            client.publish_value("pressure", "100000 Pa");
-            client.publish_value("temperature", "20 C");
-            client.publish_value("humidity", "30 %");
+            //client.publish_value("pressure", "100000 Pa");
+//            client.publish_value("temperature", "20 C");
+//            client.publish_value("humidity", "30 %");
+            client.publish_value("huamn", "30 %");
             
             last_report = t.read();
         }