mbed - mbed(SerialHalfDuplex入り)

Users » yusuke_kyo » Code » mbed

mbed(SerialHalfDuplex入り)

TARGET_NUCLEO_F302R8/stm32f3xx_hal_uart.h@90:cb3d968589d8, 2014-10-28 (annotated)

Committer:: Kojto
Date:: Tue Oct 28 16:40:41 2014 +0000
Revision:: 90:cb3d968589d8

Release 90 of the mbed library



Changes:



- Freescale KSDK update (v1.0)

- K22 - new target addition

- KL43Z - new target addition

- Nucleo F091RC - new target addition

- Nucleo L152RE - STM32Cube driver

- Nordic - Softdevice v7.1.0

- Nvic files - BSD License

- LPC824 - various HAL fixes

- Nucleo F411RE - CMSIS - IAR files

Who changed what in which revision?

User	Revision	Line number	New contents of line
Kojto	90:cb3d968589d8	1	/**
Kojto	90:cb3d968589d8	2	******************************************************************************
Kojto	90:cb3d968589d8	3	* @file stm32f3xx_hal_uart.h
Kojto	90:cb3d968589d8	4	* @author MCD Application Team
Kojto	90:cb3d968589d8	5	* @version V1.1.0
Kojto	90:cb3d968589d8	6	* @date 12-Sept-2014
Kojto	90:cb3d968589d8	7	* @brief Header file of UART HAL module.
Kojto	90:cb3d968589d8	8	******************************************************************************
Kojto	90:cb3d968589d8	9	* @attention
Kojto	90:cb3d968589d8	10	*
Kojto	90:cb3d968589d8	11	* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
Kojto	90:cb3d968589d8	12	*
Kojto	90:cb3d968589d8	13	* Redistribution and use in source and binary forms, with or without modification,
Kojto	90:cb3d968589d8	14	* are permitted provided that the following conditions are met:
Kojto	90:cb3d968589d8	15	* 1. Redistributions of source code must retain the above copyright notice,
Kojto	90:cb3d968589d8	16	* this list of conditions and the following disclaimer.
Kojto	90:cb3d968589d8	17	* 2. Redistributions in binary form must reproduce the above copyright notice,
Kojto	90:cb3d968589d8	18	* this list of conditions and the following disclaimer in the documentation
Kojto	90:cb3d968589d8	19	* and/or other materials provided with the distribution.
Kojto	90:cb3d968589d8	20	* 3. Neither the name of STMicroelectronics nor the names of its contributors
Kojto	90:cb3d968589d8	21	* may be used to endorse or promote products derived from this software
Kojto	90:cb3d968589d8	22	* without specific prior written permission.
Kojto	90:cb3d968589d8	23	*
Kojto	90:cb3d968589d8	24	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
Kojto	90:cb3d968589d8	25	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
Kojto	90:cb3d968589d8	26	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
Kojto	90:cb3d968589d8	27	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
Kojto	90:cb3d968589d8	28	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
Kojto	90:cb3d968589d8	29	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
Kojto	90:cb3d968589d8	30	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
Kojto	90:cb3d968589d8	31	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
Kojto	90:cb3d968589d8	32	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
Kojto	90:cb3d968589d8	33	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Kojto	90:cb3d968589d8	34	*
Kojto	90:cb3d968589d8	35	******************************************************************************
Kojto	90:cb3d968589d8	36	*/
Kojto	90:cb3d968589d8	37
Kojto	90:cb3d968589d8	38	/* Define to prevent recursive inclusion -------------------------------------*/
Kojto	90:cb3d968589d8	39	#ifndef __STM32F3xx_HAL_UART_H
Kojto	90:cb3d968589d8	40	#define __STM32F3xx_HAL_UART_H
Kojto	90:cb3d968589d8	41
Kojto	90:cb3d968589d8	42	#ifdef __cplusplus
Kojto	90:cb3d968589d8	43	extern "C" {
Kojto	90:cb3d968589d8	44	#endif
Kojto	90:cb3d968589d8	45
Kojto	90:cb3d968589d8	46	/* Includes ------------------------------------------------------------------*/
Kojto	90:cb3d968589d8	47	#include "stm32f3xx_hal_def.h"
Kojto	90:cb3d968589d8	48
Kojto	90:cb3d968589d8	49	/** @addtogroup STM32F3xx_HAL_Driver
Kojto	90:cb3d968589d8	50	* @{
Kojto	90:cb3d968589d8	51	*/
Kojto	90:cb3d968589d8	52
Kojto	90:cb3d968589d8	53	/** @addtogroup UART
Kojto	90:cb3d968589d8	54	* @{
Kojto	90:cb3d968589d8	55	*/
Kojto	90:cb3d968589d8	56
Kojto	90:cb3d968589d8	57	/* Exported types ------------------------------------------------------------*/
Kojto	90:cb3d968589d8	58	/** @defgroup UART_Exported_Types UART Exported Types
Kojto	90:cb3d968589d8	59	* @{
Kojto	90:cb3d968589d8	60	*/
Kojto	90:cb3d968589d8	61
Kojto	90:cb3d968589d8	62	/**
Kojto	90:cb3d968589d8	63	* @brief UART Init Structure definition
Kojto	90:cb3d968589d8	64	*/
Kojto	90:cb3d968589d8	65	typedef struct
Kojto	90:cb3d968589d8	66	{
Kojto	90:cb3d968589d8	67	uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
Kojto	90:cb3d968589d8	68	The baud rate register is computed using the following formula:
Kojto	90:cb3d968589d8	69	- If oversampling is 16 or in LIN mode,
Kojto	90:cb3d968589d8	70	Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
Kojto	90:cb3d968589d8	71	- If oversampling is 8,
Kojto	90:cb3d968589d8	72	Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
Kojto	90:cb3d968589d8	73	Baud Rate Register[3] = 0
Kojto	90:cb3d968589d8	74	Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
Kojto	90:cb3d968589d8	75
Kojto	90:cb3d968589d8	76	uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
Kojto	90:cb3d968589d8	77	This parameter can be a value of @ref UARTEx_Word_Length */
Kojto	90:cb3d968589d8	78
Kojto	90:cb3d968589d8	79	uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
Kojto	90:cb3d968589d8	80	This parameter can be a value of @ref UART_Stop_Bits */
Kojto	90:cb3d968589d8	81
Kojto	90:cb3d968589d8	82	uint32_t Parity; /*!< Specifies the parity mode.
Kojto	90:cb3d968589d8	83	This parameter can be a value of @ref UART_Parity
Kojto	90:cb3d968589d8	84	@note When parity is enabled, the computed parity is inserted
Kojto	90:cb3d968589d8	85	at the MSB position of the transmitted data (9th bit when
Kojto	90:cb3d968589d8	86	the word length is set to 9 data bits; 8th bit when the
Kojto	90:cb3d968589d8	87	word length is set to 8 data bits). */
Kojto	90:cb3d968589d8	88
Kojto	90:cb3d968589d8	89	uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
Kojto	90:cb3d968589d8	90	This parameter can be a value of @ref UART_Mode */
Kojto	90:cb3d968589d8	91
Kojto	90:cb3d968589d8	92	uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
Kojto	90:cb3d968589d8	93	or disabled.
Kojto	90:cb3d968589d8	94	This parameter can be a value of @ref UART_Hardware_Flow_Control */
Kojto	90:cb3d968589d8	95
Kojto	90:cb3d968589d8	96	uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
Kojto	90:cb3d968589d8	97	This parameter can be a value of @ref UART_Over_Sampling */
Kojto	90:cb3d968589d8	98
Kojto	90:cb3d968589d8	99	uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
Kojto	90:cb3d968589d8	100	Selecting the single sample method increases the receiver tolerance to clock
Kojto	90:cb3d968589d8	101	deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
Kojto	90:cb3d968589d8	102	}UART_InitTypeDef;
Kojto	90:cb3d968589d8	103
Kojto	90:cb3d968589d8	104	/**
Kojto	90:cb3d968589d8	105	* @brief UART Advanced Features initalization structure definition
Kojto	90:cb3d968589d8	106	*/
Kojto	90:cb3d968589d8	107	typedef struct
Kojto	90:cb3d968589d8	108	{
Kojto	90:cb3d968589d8	109	uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
Kojto	90:cb3d968589d8	110	Advanced Features may be initialized at the same time .
Kojto	90:cb3d968589d8	111	This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
Kojto	90:cb3d968589d8	112
Kojto	90:cb3d968589d8	113	uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
Kojto	90:cb3d968589d8	114	This parameter can be a value of @ref UART_Tx_Inv */
Kojto	90:cb3d968589d8	115
Kojto	90:cb3d968589d8	116	uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
Kojto	90:cb3d968589d8	117	This parameter can be a value of @ref UART_Rx_Inv */
Kojto	90:cb3d968589d8	118
Kojto	90:cb3d968589d8	119	uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
Kojto	90:cb3d968589d8	120	vs negative/inverted logic).
Kojto	90:cb3d968589d8	121	This parameter can be a value of @ref UART_Data_Inv */
Kojto	90:cb3d968589d8	122
Kojto	90:cb3d968589d8	123	uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
Kojto	90:cb3d968589d8	124	This parameter can be a value of @ref UART_Rx_Tx_Swap */
Kojto	90:cb3d968589d8	125
Kojto	90:cb3d968589d8	126	uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
Kojto	90:cb3d968589d8	127	This parameter can be a value of @ref UART_Overrun_Disable */
Kojto	90:cb3d968589d8	128
Kojto	90:cb3d968589d8	129	uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
Kojto	90:cb3d968589d8	130	This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
Kojto	90:cb3d968589d8	131
Kojto	90:cb3d968589d8	132	uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
Kojto	90:cb3d968589d8	133	This parameter can be a value of @ref UART_AutoBaudRate_Enable */
Kojto	90:cb3d968589d8	134
Kojto	90:cb3d968589d8	135	uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
Kojto	90:cb3d968589d8	136	detection is carried out.
Kojto	90:cb3d968589d8	137	This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
Kojto	90:cb3d968589d8	138
Kojto	90:cb3d968589d8	139	uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
Kojto	90:cb3d968589d8	140	This parameter can be a value of @ref UART_MSB_First */
Kojto	90:cb3d968589d8	141	} UART_AdvFeatureInitTypeDef;
Kojto	90:cb3d968589d8	142
Kojto	90:cb3d968589d8	143	/**
Kojto	90:cb3d968589d8	144	* @brief UART wake up from stop mode parameters
Kojto	90:cb3d968589d8	145	*/
Kojto	90:cb3d968589d8	146	typedef struct
Kojto	90:cb3d968589d8	147	{
Kojto	90:cb3d968589d8	148	uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
Kojto	90:cb3d968589d8	149	This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
Kojto	90:cb3d968589d8	150	If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
Kojto	90:cb3d968589d8	151	be filled up. */
Kojto	90:cb3d968589d8	152
Kojto	90:cb3d968589d8	153	uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
Kojto	90:cb3d968589d8	154	This parameter can be a value of @ref UART_WakeUp_Address_Length */
Kojto	90:cb3d968589d8	155
Kojto	90:cb3d968589d8	156	uint8_t Address; /!< UART/USART node address (7-bit long max) /
Kojto	90:cb3d968589d8	157	} UART_WakeUpTypeDef;
Kojto	90:cb3d968589d8	158
Kojto	90:cb3d968589d8	159	/**
Kojto	90:cb3d968589d8	160	* @brief HAL UART State structures definition
Kojto	90:cb3d968589d8	161	*/
Kojto	90:cb3d968589d8	162	typedef enum
Kojto	90:cb3d968589d8	163	{
Kojto	90:cb3d968589d8	164	HAL_UART_STATE_RESET = 0x00, /!< Peripheral is not initialized /
Kojto	90:cb3d968589d8	165	HAL_UART_STATE_READY = 0x01, /!< Peripheral Initialized and ready for use /
Kojto	90:cb3d968589d8	166	HAL_UART_STATE_BUSY = 0x02, /!< an internal process is ongoing /
Kojto	90:cb3d968589d8	167	HAL_UART_STATE_BUSY_TX = 0x12, /!< Data Transmission process is ongoing /
Kojto	90:cb3d968589d8	168	HAL_UART_STATE_BUSY_RX = 0x22, /!< Data Reception process is ongoing /
Kojto	90:cb3d968589d8	169	HAL_UART_STATE_BUSY_TX_RX = 0x32, /!< Data Transmission and Reception process is ongoing /
Kojto	90:cb3d968589d8	170	HAL_UART_STATE_TIMEOUT = 0x03, /!< Timeout state /
Kojto	90:cb3d968589d8	171	HAL_UART_STATE_ERROR = 0x04 /!< Error /
Kojto	90:cb3d968589d8	172	}HAL_UART_StateTypeDef;
Kojto	90:cb3d968589d8	173
Kojto	90:cb3d968589d8	174	/**
Kojto	90:cb3d968589d8	175	* @brief HAL UART Error Code structure definition
Kojto	90:cb3d968589d8	176	*/
Kojto	90:cb3d968589d8	177	typedef enum
Kojto	90:cb3d968589d8	178	{
Kojto	90:cb3d968589d8	179	HAL_UART_ERROR_NONE = 0x00, /!< No error /
Kojto	90:cb3d968589d8	180	HAL_UART_ERROR_PE = 0x01, /!< Parity error /
Kojto	90:cb3d968589d8	181	HAL_UART_ERROR_NE = 0x02, /!< Noise error /
Kojto	90:cb3d968589d8	182	HAL_UART_ERROR_FE = 0x04, /!< frame error /
Kojto	90:cb3d968589d8	183	HAL_UART_ERROR_ORE = 0x08, /!< Overrun error /
Kojto	90:cb3d968589d8	184	HAL_UART_ERROR_DMA = 0x10 /!< DMA transfer error /
Kojto	90:cb3d968589d8	185	}HAL_UART_ErrorTypeDef;
Kojto	90:cb3d968589d8	186
Kojto	90:cb3d968589d8	187	/**
Kojto	90:cb3d968589d8	188	* @brief UART clock sources definition
Kojto	90:cb3d968589d8	189	*/
Kojto	90:cb3d968589d8	190	typedef enum
Kojto	90:cb3d968589d8	191	{
Kojto	90:cb3d968589d8	192	UART_CLOCKSOURCE_PCLK1 = 0x00, /!< PCLK1 clock source /
Kojto	90:cb3d968589d8	193	UART_CLOCKSOURCE_PCLK2 = 0x01, /!< PCLK2 clock source /
Kojto	90:cb3d968589d8	194	UART_CLOCKSOURCE_HSI = 0x02, /!< HSI clock source /
Kojto	90:cb3d968589d8	195	UART_CLOCKSOURCE_SYSCLK = 0x04, /!< SYSCLK clock source /
Kojto	90:cb3d968589d8	196	UART_CLOCKSOURCE_LSE = 0x08, /!< LSE clock source /
Kojto	90:cb3d968589d8	197	UART_CLOCKSOURCE_UNDEFINED = 0x10 /!< Undefined clock source /
Kojto	90:cb3d968589d8	198	}UART_ClockSourceTypeDef;
Kojto	90:cb3d968589d8	199
Kojto	90:cb3d968589d8	200	/**
Kojto	90:cb3d968589d8	201	* @brief UART handle Structure definition
Kojto	90:cb3d968589d8	202	*/
Kojto	90:cb3d968589d8	203	typedef struct
Kojto	90:cb3d968589d8	204	{
Kojto	90:cb3d968589d8	205	USART_TypeDef Instance; / UART registers base address */
Kojto	90:cb3d968589d8	206
Kojto	90:cb3d968589d8	207	UART_InitTypeDef Init; /* UART communication parameters */
Kojto	90:cb3d968589d8	208
Kojto	90:cb3d968589d8	209	UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
Kojto	90:cb3d968589d8	210
Kojto	90:cb3d968589d8	211	uint8_t pTxBuffPtr; / Pointer to UART Tx transfer Buffer */
Kojto	90:cb3d968589d8	212
Kojto	90:cb3d968589d8	213	uint16_t TxXferSize; /* UART Tx Transfer size */
Kojto	90:cb3d968589d8	214
Kojto	90:cb3d968589d8	215	uint16_t TxXferCount; /* UART Tx Transfer Counter */
Kojto	90:cb3d968589d8	216
Kojto	90:cb3d968589d8	217	uint8_t pRxBuffPtr; / Pointer to UART Rx transfer Buffer */
Kojto	90:cb3d968589d8	218
Kojto	90:cb3d968589d8	219	uint16_t RxXferSize; /* UART Rx Transfer size */
Kojto	90:cb3d968589d8	220
Kojto	90:cb3d968589d8	221	uint16_t RxXferCount; /* UART Rx Transfer Counter */
Kojto	90:cb3d968589d8	222
Kojto	90:cb3d968589d8	223	uint16_t Mask; /* UART Rx RDR register mask */
Kojto	90:cb3d968589d8	224
Kojto	90:cb3d968589d8	225	DMA_HandleTypeDef hdmatx; / UART Tx DMA Handle parameters */
Kojto	90:cb3d968589d8	226
Kojto	90:cb3d968589d8	227	DMA_HandleTypeDef hdmarx; / UART Rx DMA Handle parameters */
Kojto	90:cb3d968589d8	228
Kojto	90:cb3d968589d8	229	HAL_LockTypeDef Lock; /* Locking object */
Kojto	90:cb3d968589d8	230
Kojto	90:cb3d968589d8	231	HAL_UART_StateTypeDef State; /* UART communication state */
Kojto	90:cb3d968589d8	232
Kojto	90:cb3d968589d8	233	HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
Kojto	90:cb3d968589d8	234
Kojto	90:cb3d968589d8	235	}UART_HandleTypeDef;
Kojto	90:cb3d968589d8	236
Kojto	90:cb3d968589d8	237	/**
Kojto	90:cb3d968589d8	238	* @}
Kojto	90:cb3d968589d8	239	*/
Kojto	90:cb3d968589d8	240
Kojto	90:cb3d968589d8	241	/* Exported constants --------------------------------------------------------*/
Kojto	90:cb3d968589d8	242	/** @defgroup UART_Exported_Constants UART Exported Constants
Kojto	90:cb3d968589d8	243	* @{
Kojto	90:cb3d968589d8	244	*/
Kojto	90:cb3d968589d8	245
Kojto	90:cb3d968589d8	246	/** @defgroup UART_Stop_Bits UART Number of Stop Bits
Kojto	90:cb3d968589d8	247	* @{
Kojto	90:cb3d968589d8	248	*/
Kojto	90:cb3d968589d8	249	#define UART_STOPBITS_1 ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	250	#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
Kojto	90:cb3d968589d8	251	#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) \|\| \
Kojto	90:cb3d968589d8	252	((STOPBITS) == UART_STOPBITS_2))
Kojto	90:cb3d968589d8	253	/**
Kojto	90:cb3d968589d8	254	* @}
Kojto	90:cb3d968589d8	255	*/
Kojto	90:cb3d968589d8	256
Kojto	90:cb3d968589d8	257	/** @defgroup UART_Parity UART Parity
Kojto	90:cb3d968589d8	258	* @{
Kojto	90:cb3d968589d8	259	*/
Kojto	90:cb3d968589d8	260	#define UART_PARITY_NONE ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	261	#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
Kojto	90:cb3d968589d8	262	#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE \| USART_CR1_PS))
Kojto	90:cb3d968589d8	263	#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) \|\| \
Kojto	90:cb3d968589d8	264	((PARITY) == UART_PARITY_EVEN) \|\| \
Kojto	90:cb3d968589d8	265	((PARITY) == UART_PARITY_ODD))
Kojto	90:cb3d968589d8	266	/**
Kojto	90:cb3d968589d8	267	* @}
Kojto	90:cb3d968589d8	268	*/
Kojto	90:cb3d968589d8	269
Kojto	90:cb3d968589d8	270	/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
Kojto	90:cb3d968589d8	271	* @{
Kojto	90:cb3d968589d8	272	*/
Kojto	90:cb3d968589d8	273	#define UART_HWCONTROL_NONE ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	274	#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
Kojto	90:cb3d968589d8	275	#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
Kojto	90:cb3d968589d8	276	#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE \| USART_CR3_CTSE))
Kojto	90:cb3d968589d8	277	#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
Kojto	90:cb3d968589d8	278	(((CONTROL) == UART_HWCONTROL_NONE) \|\| \
Kojto	90:cb3d968589d8	279	((CONTROL) == UART_HWCONTROL_RTS) \|\| \
Kojto	90:cb3d968589d8	280	((CONTROL) == UART_HWCONTROL_CTS) \|\| \
Kojto	90:cb3d968589d8	281	((CONTROL) == UART_HWCONTROL_RTS_CTS))
Kojto	90:cb3d968589d8	282	/**
Kojto	90:cb3d968589d8	283	* @}
Kojto	90:cb3d968589d8	284	*/
Kojto	90:cb3d968589d8	285
Kojto	90:cb3d968589d8	286	/** @defgroup UART_Mode UART Transfer Mode
Kojto	90:cb3d968589d8	287	* @{
Kojto	90:cb3d968589d8	288	*/
Kojto	90:cb3d968589d8	289	#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
Kojto	90:cb3d968589d8	290	#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
Kojto	90:cb3d968589d8	291	#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE \|USART_CR1_RE))
Kojto	90:cb3d968589d8	292	#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
Kojto	90:cb3d968589d8	293	/**
Kojto	90:cb3d968589d8	294	* @}
Kojto	90:cb3d968589d8	295	*/
Kojto	90:cb3d968589d8	296
Kojto	90:cb3d968589d8	297	/** @defgroup UART_State UART State
Kojto	90:cb3d968589d8	298	* @{
Kojto	90:cb3d968589d8	299	*/
Kojto	90:cb3d968589d8	300	#define UART_STATE_DISABLE ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	301	#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
Kojto	90:cb3d968589d8	302	#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) \|\| \
Kojto	90:cb3d968589d8	303	((STATE) == UART_STATE_ENABLE))
Kojto	90:cb3d968589d8	304	/**
Kojto	90:cb3d968589d8	305	* @}
Kojto	90:cb3d968589d8	306	*/
Kojto	90:cb3d968589d8	307
Kojto	90:cb3d968589d8	308	/** @defgroup UART_Over_Sampling UART Over Sampling
Kojto	90:cb3d968589d8	309	* @{
Kojto	90:cb3d968589d8	310	*/
Kojto	90:cb3d968589d8	311	#define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	312	#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
Kojto	90:cb3d968589d8	313	#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) \|\| \
Kojto	90:cb3d968589d8	314	((SAMPLING) == UART_OVERSAMPLING_8))
Kojto	90:cb3d968589d8	315	/**
Kojto	90:cb3d968589d8	316	* @}
Kojto	90:cb3d968589d8	317	*/
Kojto	90:cb3d968589d8	318
Kojto	90:cb3d968589d8	319	/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
Kojto	90:cb3d968589d8	320	* @{
Kojto	90:cb3d968589d8	321	*/
Kojto	90:cb3d968589d8	322	#define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	323	#define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
Kojto	90:cb3d968589d8	324	#define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) \|\| \
Kojto	90:cb3d968589d8	325	((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
Kojto	90:cb3d968589d8	326	/**
Kojto	90:cb3d968589d8	327	* @}
Kojto	90:cb3d968589d8	328	*/
Kojto	90:cb3d968589d8	329
Kojto	90:cb3d968589d8	330	/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
Kojto	90:cb3d968589d8	331	* @{
Kojto	90:cb3d968589d8	332	*/
Kojto	90:cb3d968589d8	333	#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	334	#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
Kojto	90:cb3d968589d8	335	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
Kojto	90:cb3d968589d8	336	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
Kojto	90:cb3d968589d8	337	#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) \|\| \
Kojto	90:cb3d968589d8	338	((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) \|\| \
Kojto	90:cb3d968589d8	339	((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) \|\| \
Kojto	90:cb3d968589d8	340	((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
Kojto	90:cb3d968589d8	341	/**
Kojto	90:cb3d968589d8	342	* @}
Kojto	90:cb3d968589d8	343	*/
Kojto	90:cb3d968589d8	344
Kojto	90:cb3d968589d8	345	/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
Kojto	90:cb3d968589d8	346	* @{
Kojto	90:cb3d968589d8	347	*/
Kojto	90:cb3d968589d8	348	#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	349	#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
Kojto	90:cb3d968589d8	350	#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) \|\| \
Kojto	90:cb3d968589d8	351	((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
Kojto	90:cb3d968589d8	352	/**
Kojto	90:cb3d968589d8	353	* @}
Kojto	90:cb3d968589d8	354	*/
Kojto	90:cb3d968589d8	355
Kojto	90:cb3d968589d8	356	/** @defgroup UART_LIN UART Local Interconnection Network mode
Kojto	90:cb3d968589d8	357	* @{
Kojto	90:cb3d968589d8	358	*/
Kojto	90:cb3d968589d8	359	#define UART_LIN_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	360	#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
Kojto	90:cb3d968589d8	361	#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) \|\| \
Kojto	90:cb3d968589d8	362	((LIN) == UART_LIN_ENABLE))
Kojto	90:cb3d968589d8	363	/**
Kojto	90:cb3d968589d8	364	* @}
Kojto	90:cb3d968589d8	365	*/
Kojto	90:cb3d968589d8	366
Kojto	90:cb3d968589d8	367	/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
Kojto	90:cb3d968589d8	368	* @{
Kojto	90:cb3d968589d8	369	*/
Kojto	90:cb3d968589d8	370	#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	371	#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
Kojto	90:cb3d968589d8	372	#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) \|\| \
Kojto	90:cb3d968589d8	373	((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
Kojto	90:cb3d968589d8	374	/**
Kojto	90:cb3d968589d8	375	* @}
Kojto	90:cb3d968589d8	376	*/
Kojto	90:cb3d968589d8	377
Kojto	90:cb3d968589d8	378
Kojto	90:cb3d968589d8	379
Kojto	90:cb3d968589d8	380	/** @defgroup UART_One_Bit UART One Bit sampling
Kojto	90:cb3d968589d8	381	* @{
Kojto	90:cb3d968589d8	382	*/
Kojto	90:cb3d968589d8	383	#define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	384	#define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
Kojto	90:cb3d968589d8	385	#define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) \|\| \
Kojto	90:cb3d968589d8	386	((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
Kojto	90:cb3d968589d8	387	/**
Kojto	90:cb3d968589d8	388	* @}
Kojto	90:cb3d968589d8	389	*/
Kojto	90:cb3d968589d8	390
Kojto	90:cb3d968589d8	391	/** @defgroup UART_DMA_Tx UART DMA Tx
Kojto	90:cb3d968589d8	392	* @{
Kojto	90:cb3d968589d8	393	*/
Kojto	90:cb3d968589d8	394	#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	395	#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
Kojto	90:cb3d968589d8	396	#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) \|\| \
Kojto	90:cb3d968589d8	397	((DMATX) == UART_DMA_TX_ENABLE))
Kojto	90:cb3d968589d8	398	/**
Kojto	90:cb3d968589d8	399	* @}
Kojto	90:cb3d968589d8	400	*/
Kojto	90:cb3d968589d8	401
Kojto	90:cb3d968589d8	402	/** @defgroup UART_DMA_Rx UART DMA Rx
Kojto	90:cb3d968589d8	403	* @{
Kojto	90:cb3d968589d8	404	*/
Kojto	90:cb3d968589d8	405	#define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	406	#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
Kojto	90:cb3d968589d8	407	#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) \|\| \
Kojto	90:cb3d968589d8	408	((DMARX) == UART_DMA_RX_ENABLE))
Kojto	90:cb3d968589d8	409	/**
Kojto	90:cb3d968589d8	410	* @}
Kojto	90:cb3d968589d8	411	*/
Kojto	90:cb3d968589d8	412
Kojto	90:cb3d968589d8	413	/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
Kojto	90:cb3d968589d8	414	* @{
Kojto	90:cb3d968589d8	415	*/
Kojto	90:cb3d968589d8	416	#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	417	#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
Kojto	90:cb3d968589d8	418	#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) \|\| \
Kojto	90:cb3d968589d8	419	((HDSEL) == UART_HALF_DUPLEX_ENABLE))
Kojto	90:cb3d968589d8	420	/**
Kojto	90:cb3d968589d8	421	* @}
Kojto	90:cb3d968589d8	422	*/
Kojto	90:cb3d968589d8	423
Kojto	90:cb3d968589d8	424	/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
Kojto	90:cb3d968589d8	425	* @{
Kojto	90:cb3d968589d8	426	*/
Kojto	90:cb3d968589d8	427	#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	428	#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
Kojto	90:cb3d968589d8	429	#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) \|\| \
Kojto	90:cb3d968589d8	430	((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
Kojto	90:cb3d968589d8	431	/**
Kojto	90:cb3d968589d8	432	* @}
Kojto	90:cb3d968589d8	433	*/
Kojto	90:cb3d968589d8	434
Kojto	90:cb3d968589d8	435	/** @defgroup UART_Flags UART Status Flags
Kojto	90:cb3d968589d8	436	* Elements values convention: 0xXXXX
Kojto	90:cb3d968589d8	437	* - 0xXXXX : Flag mask in the ISR register
Kojto	90:cb3d968589d8	438	* @{
Kojto	90:cb3d968589d8	439	*/
Kojto	90:cb3d968589d8	440	#define UART_FLAG_REACK ((uint32_t)0x00400000)
Kojto	90:cb3d968589d8	441	#define UART_FLAG_TEACK ((uint32_t)0x00200000)
Kojto	90:cb3d968589d8	442	#define UART_FLAG_WUF ((uint32_t)0x00100000)
Kojto	90:cb3d968589d8	443	#define UART_FLAG_RWU ((uint32_t)0x00080000)
Kojto	90:cb3d968589d8	444	#define UART_FLAG_SBKF ((uint32_t)0x00040000
Kojto	90:cb3d968589d8	445	#define UART_FLAG_CMF ((uint32_t)0x00020000)
Kojto	90:cb3d968589d8	446	#define UART_FLAG_BUSY ((uint32_t)0x00010000)
Kojto	90:cb3d968589d8	447	#define UART_FLAG_ABRF ((uint32_t)0x00008000)
Kojto	90:cb3d968589d8	448	#define UART_FLAG_ABRE ((uint32_t)0x00004000)
Kojto	90:cb3d968589d8	449	#define UART_FLAG_EOBF ((uint32_t)0x00001000)
Kojto	90:cb3d968589d8	450	#define UART_FLAG_RTOF ((uint32_t)0x00000800)
Kojto	90:cb3d968589d8	451	#define UART_FLAG_CTS ((uint32_t)0x00000400)
Kojto	90:cb3d968589d8	452	#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
Kojto	90:cb3d968589d8	453	#define UART_FLAG_LBDF ((uint32_t)0x00000100)
Kojto	90:cb3d968589d8	454	#define UART_FLAG_TXE ((uint32_t)0x00000080)
Kojto	90:cb3d968589d8	455	#define UART_FLAG_TC ((uint32_t)0x00000040)
Kojto	90:cb3d968589d8	456	#define UART_FLAG_RXNE ((uint32_t)0x00000020)
Kojto	90:cb3d968589d8	457	#define UART_FLAG_IDLE ((uint32_t)0x00000010)
Kojto	90:cb3d968589d8	458	#define UART_FLAG_ORE ((uint32_t)0x00000008)
Kojto	90:cb3d968589d8	459	#define UART_FLAG_NE ((uint32_t)0x00000004)
Kojto	90:cb3d968589d8	460	#define UART_FLAG_FE ((uint32_t)0x00000002)
Kojto	90:cb3d968589d8	461	#define UART_FLAG_PE ((uint32_t)0x00000001)
Kojto	90:cb3d968589d8	462	/**
Kojto	90:cb3d968589d8	463	* @}
Kojto	90:cb3d968589d8	464	*/
Kojto	90:cb3d968589d8	465
Kojto	90:cb3d968589d8	466	/** @defgroup UART_Interrupt_definition UART Interrupts Definition
Kojto	90:cb3d968589d8	467	* Elements values convention: 0000ZZZZ0XXYYYYYb
Kojto	90:cb3d968589d8	468	* - YYYYY : Interrupt source position in the XX register (5bits)
Kojto	90:cb3d968589d8	469	* - XX : Interrupt source register (2bits)
Kojto	90:cb3d968589d8	470	* - 01: CR1 register
Kojto	90:cb3d968589d8	471	* - 10: CR2 register
Kojto	90:cb3d968589d8	472	* - 11: CR3 register
Kojto	90:cb3d968589d8	473	* - ZZZZ : Flag position in the ISR register(4bits)
Kojto	90:cb3d968589d8	474	* @{
Kojto	90:cb3d968589d8	475	*/
Kojto	90:cb3d968589d8	476	#define UART_IT_PE ((uint16_t)0x0028)
Kojto	90:cb3d968589d8	477	#define UART_IT_TXE ((uint16_t)0x0727)
Kojto	90:cb3d968589d8	478	#define UART_IT_TC ((uint16_t)0x0626)
Kojto	90:cb3d968589d8	479	#define UART_IT_RXNE ((uint16_t)0x0525)
Kojto	90:cb3d968589d8	480	#define UART_IT_IDLE ((uint16_t)0x0424)
Kojto	90:cb3d968589d8	481	#define UART_IT_LBD ((uint16_t)0x0846)
Kojto	90:cb3d968589d8	482	#define UART_IT_CTS ((uint16_t)0x096A)
Kojto	90:cb3d968589d8	483	#define UART_IT_CM ((uint16_t)0x142E)
Kojto	90:cb3d968589d8	484	#define UART_IT_WUF ((uint16_t)0x1476)
Kojto	90:cb3d968589d8	485
Kojto	90:cb3d968589d8	486	/** Elements values convention: 000000000XXYYYYYb
Kojto	90:cb3d968589d8	487	* - YYYYY : Interrupt source position in the XX register (5bits)
Kojto	90:cb3d968589d8	488	* - XX : Interrupt source register (2bits)
Kojto	90:cb3d968589d8	489	* - 01: CR1 register
Kojto	90:cb3d968589d8	490	* - 10: CR2 register
Kojto	90:cb3d968589d8	491	* - 11: CR3 register
Kojto	90:cb3d968589d8	492	*/
Kojto	90:cb3d968589d8	493	#define UART_IT_ERR ((uint16_t)0x0060)
Kojto	90:cb3d968589d8	494
Kojto	90:cb3d968589d8	495	/** Elements values convention: 0000ZZZZ00000000b
Kojto	90:cb3d968589d8	496	* - ZZZZ : Flag position in the ISR register(4bits)
Kojto	90:cb3d968589d8	497	*/
Kojto	90:cb3d968589d8	498	#define UART_IT_ORE ((uint16_t)0x0300)
Kojto	90:cb3d968589d8	499	#define UART_IT_NE ((uint16_t)0x0200)
Kojto	90:cb3d968589d8	500	#define UART_IT_FE ((uint16_t)0x0100)
Kojto	90:cb3d968589d8	501	/**
Kojto	90:cb3d968589d8	502	* @}
Kojto	90:cb3d968589d8	503	*/
Kojto	90:cb3d968589d8	504
Kojto	90:cb3d968589d8	505	/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
Kojto	90:cb3d968589d8	506	* @{
Kojto	90:cb3d968589d8	507	*/
Kojto	90:cb3d968589d8	508	#define UART_CLEAR_PEF USART_ICR_PECF /!< Parity Error Clear Flag /
Kojto	90:cb3d968589d8	509	#define UART_CLEAR_FEF USART_ICR_FECF /!< Framing Error Clear Flag /
Kojto	90:cb3d968589d8	510	#define UART_CLEAR_NEF USART_ICR_NCF /!< Noise detected Clear Flag /
Kojto	90:cb3d968589d8	511	#define UART_CLEAR_OREF USART_ICR_ORECF /!< OverRun Error Clear Flag /
Kojto	90:cb3d968589d8	512	#define UART_CLEAR_IDLEF USART_ICR_IDLECF /!< IDLE line detected Clear Flag /
Kojto	90:cb3d968589d8	513	#define UART_CLEAR_TCF USART_ICR_TCCF /!< Transmission Complete Clear Flag /
Kojto	90:cb3d968589d8	514	#define UART_CLEAR_LBDF USART_ICR_LBDCF /!< LIN Break Detection Clear Flag /
Kojto	90:cb3d968589d8	515	#define UART_CLEAR_CTSF USART_ICR_CTSCF /!< CTS Interrupt Clear Flag /
Kojto	90:cb3d968589d8	516	#define UART_CLEAR_RTOF USART_ICR_RTOCF /!< Receiver Time Out Clear Flag /
Kojto	90:cb3d968589d8	517	#define UART_CLEAR_EOBF USART_ICR_EOBCF /!< End Of Block Clear Flag /
Kojto	90:cb3d968589d8	518	#define UART_CLEAR_CMF USART_ICR_CMCF /!< Character Match Clear Flag /
Kojto	90:cb3d968589d8	519	#define UART_CLEAR_WUF USART_ICR_WUCF /!< Wake Up from stop mode Clear Flag /
Kojto	90:cb3d968589d8	520	/**
Kojto	90:cb3d968589d8	521	* @}
Kojto	90:cb3d968589d8	522	*/
Kojto	90:cb3d968589d8	523
Kojto	90:cb3d968589d8	524	/** @defgroup UART_Request_Parameters UART Request Parameters
Kojto	90:cb3d968589d8	525	* @{
Kojto	90:cb3d968589d8	526	*/
Kojto	90:cb3d968589d8	527	#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /!< Auto-Baud Rate Request /
Kojto	90:cb3d968589d8	528	#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /!< Send Break Request /
Kojto	90:cb3d968589d8	529	#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /!< Mute Mode Request /
Kojto	90:cb3d968589d8	530	#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /!< Receive Data flush Request /
Kojto	90:cb3d968589d8	531	#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /!< Transmit data flush Request /
Kojto	90:cb3d968589d8	532	#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) \|\| \
Kojto	90:cb3d968589d8	533	((PARAM) == UART_SENDBREAK_REQUEST) \|\| \
Kojto	90:cb3d968589d8	534	((PARAM) == UART_MUTE_MODE_REQUEST) \|\| \
Kojto	90:cb3d968589d8	535	((PARAM) == UART_RXDATA_FLUSH_REQUEST) \|\| \
Kojto	90:cb3d968589d8	536	((PARAM) == UART_TXDATA_FLUSH_REQUEST))
Kojto	90:cb3d968589d8	537	/**
Kojto	90:cb3d968589d8	538	* @}
Kojto	90:cb3d968589d8	539	*/
Kojto	90:cb3d968589d8	540
Kojto	90:cb3d968589d8	541	/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
Kojto	90:cb3d968589d8	542	* @{
Kojto	90:cb3d968589d8	543	*/
Kojto	90:cb3d968589d8	544	#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	545	#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
Kojto	90:cb3d968589d8	546	#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
Kojto	90:cb3d968589d8	547	#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
Kojto	90:cb3d968589d8	548	#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
Kojto	90:cb3d968589d8	549	#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
Kojto	90:cb3d968589d8	550	#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
Kojto	90:cb3d968589d8	551	#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
Kojto	90:cb3d968589d8	552	#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
Kojto	90:cb3d968589d8	553	#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT \| \
Kojto	90:cb3d968589d8	554	UART_ADVFEATURE_TXINVERT_INIT \| \
Kojto	90:cb3d968589d8	555	UART_ADVFEATURE_RXINVERT_INIT \| \
Kojto	90:cb3d968589d8	556	UART_ADVFEATURE_DATAINVERT_INIT \| \
Kojto	90:cb3d968589d8	557	UART_ADVFEATURE_SWAP_INIT \| \
Kojto	90:cb3d968589d8	558	UART_ADVFEATURE_RXOVERRUNDISABLE_INIT \| \
Kojto	90:cb3d968589d8	559	UART_ADVFEATURE_DMADISABLEONERROR_INIT \| \
Kojto	90:cb3d968589d8	560	UART_ADVFEATURE_AUTOBAUDRATE_INIT \| \
Kojto	90:cb3d968589d8	561	UART_ADVFEATURE_MSBFIRST_INIT))
Kojto	90:cb3d968589d8	562	/**
Kojto	90:cb3d968589d8	563	* @}
Kojto	90:cb3d968589d8	564	*/
Kojto	90:cb3d968589d8	565
Kojto	90:cb3d968589d8	566	/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
Kojto	90:cb3d968589d8	567	* @{
Kojto	90:cb3d968589d8	568	*/
Kojto	90:cb3d968589d8	569	#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	570	#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
Kojto	90:cb3d968589d8	571	#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) \|\| \
Kojto	90:cb3d968589d8	572	((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
Kojto	90:cb3d968589d8	573	/**
Kojto	90:cb3d968589d8	574	* @}
Kojto	90:cb3d968589d8	575	*/
Kojto	90:cb3d968589d8	576
Kojto	90:cb3d968589d8	577	/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
Kojto	90:cb3d968589d8	578	* @{
Kojto	90:cb3d968589d8	579	*/
Kojto	90:cb3d968589d8	580	#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	581	#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
Kojto	90:cb3d968589d8	582	#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) \|\| \
Kojto	90:cb3d968589d8	583	((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
Kojto	90:cb3d968589d8	584	/**
Kojto	90:cb3d968589d8	585	* @}
Kojto	90:cb3d968589d8	586	*/
Kojto	90:cb3d968589d8	587
Kojto	90:cb3d968589d8	588	/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
Kojto	90:cb3d968589d8	589	* @{
Kojto	90:cb3d968589d8	590	*/
Kojto	90:cb3d968589d8	591	#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	592	#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
Kojto	90:cb3d968589d8	593	#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) \|\| \
Kojto	90:cb3d968589d8	594	((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
Kojto	90:cb3d968589d8	595	/**
Kojto	90:cb3d968589d8	596	* @}
Kojto	90:cb3d968589d8	597	*/
Kojto	90:cb3d968589d8	598
Kojto	90:cb3d968589d8	599	/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
Kojto	90:cb3d968589d8	600	* @{
Kojto	90:cb3d968589d8	601	*/
Kojto	90:cb3d968589d8	602	#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	603	#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
Kojto	90:cb3d968589d8	604	#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) \|\| \
Kojto	90:cb3d968589d8	605	((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
Kojto	90:cb3d968589d8	606	/**
Kojto	90:cb3d968589d8	607	* @}
Kojto	90:cb3d968589d8	608	*/
Kojto	90:cb3d968589d8	609
Kojto	90:cb3d968589d8	610	/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
Kojto	90:cb3d968589d8	611	* @{
Kojto	90:cb3d968589d8	612	*/
Kojto	90:cb3d968589d8	613	#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	614	#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
Kojto	90:cb3d968589d8	615	#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) \|\| \
Kojto	90:cb3d968589d8	616	((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
Kojto	90:cb3d968589d8	617	/**
Kojto	90:cb3d968589d8	618	* @}
Kojto	90:cb3d968589d8	619	*/
Kojto	90:cb3d968589d8	620
Kojto	90:cb3d968589d8	621	/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
Kojto	90:cb3d968589d8	622	* @{
Kojto	90:cb3d968589d8	623	*/
Kojto	90:cb3d968589d8	624	#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	625	#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
Kojto	90:cb3d968589d8	626	#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) \|\| \
Kojto	90:cb3d968589d8	627	((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
Kojto	90:cb3d968589d8	628	/**
Kojto	90:cb3d968589d8	629	* @}
Kojto	90:cb3d968589d8	630	*/
Kojto	90:cb3d968589d8	631
Kojto	90:cb3d968589d8	632	/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
Kojto	90:cb3d968589d8	633	* @{
Kojto	90:cb3d968589d8	634	*/
Kojto	90:cb3d968589d8	635	#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	636	#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
Kojto	90:cb3d968589d8	637	#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) \|\| \
Kojto	90:cb3d968589d8	638	((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
Kojto	90:cb3d968589d8	639	/**
Kojto	90:cb3d968589d8	640	* @}
Kojto	90:cb3d968589d8	641	*/
Kojto	90:cb3d968589d8	642
Kojto	90:cb3d968589d8	643	/** @defgroup UART_MSB_First UART Advanced Feature MSB First
Kojto	90:cb3d968589d8	644	* @{
Kojto	90:cb3d968589d8	645	*/
Kojto	90:cb3d968589d8	646	#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	647	#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
Kojto	90:cb3d968589d8	648	#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) \|\| \
Kojto	90:cb3d968589d8	649	((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
Kojto	90:cb3d968589d8	650	/**
Kojto	90:cb3d968589d8	651	* @}
Kojto	90:cb3d968589d8	652	*/
Kojto	90:cb3d968589d8	653
Kojto	90:cb3d968589d8	654	/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
Kojto	90:cb3d968589d8	655	* @{
Kojto	90:cb3d968589d8	656	*/
Kojto	90:cb3d968589d8	657	#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	658	#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
Kojto	90:cb3d968589d8	659	#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) \|\| \
Kojto	90:cb3d968589d8	660	((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
Kojto	90:cb3d968589d8	661	/**
Kojto	90:cb3d968589d8	662	* @}
Kojto	90:cb3d968589d8	663	*/
Kojto	90:cb3d968589d8	664
Kojto	90:cb3d968589d8	665	/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
Kojto	90:cb3d968589d8	666	* @{
Kojto	90:cb3d968589d8	667	*/
Kojto	90:cb3d968589d8	668	#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	669	#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
Kojto	90:cb3d968589d8	670	#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) \|\| \
Kojto	90:cb3d968589d8	671	((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
Kojto	90:cb3d968589d8	672	/**
Kojto	90:cb3d968589d8	673	* @}
Kojto	90:cb3d968589d8	674	*/
Kojto	90:cb3d968589d8	675
Kojto	90:cb3d968589d8	676	/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
Kojto	90:cb3d968589d8	677	* @{
Kojto	90:cb3d968589d8	678	*/
Kojto	90:cb3d968589d8	679	#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
Kojto	90:cb3d968589d8	680	/**
Kojto	90:cb3d968589d8	681	* @}
Kojto	90:cb3d968589d8	682	*/
Kojto	90:cb3d968589d8	683
Kojto	90:cb3d968589d8	684	/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
Kojto	90:cb3d968589d8	685	* @{
Kojto	90:cb3d968589d8	686	*/
Kojto	90:cb3d968589d8	687	#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
Kojto	90:cb3d968589d8	688	#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
Kojto	90:cb3d968589d8	689	#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
Kojto	90:cb3d968589d8	690	#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) \|\| \
Kojto	90:cb3d968589d8	691	((WAKE) == UART_WAKEUP_ON_STARTBIT) \|\| \
Kojto	90:cb3d968589d8	692	((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
Kojto	90:cb3d968589d8	693	/**
Kojto	90:cb3d968589d8	694	* @}
Kojto	90:cb3d968589d8	695	*/
Kojto	90:cb3d968589d8	696
Kojto	90:cb3d968589d8	697	/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
Kojto	90:cb3d968589d8	698	* @{
Kojto	90:cb3d968589d8	699	*/
Kojto	90:cb3d968589d8	700	#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
Kojto	90:cb3d968589d8	701	#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
Kojto	90:cb3d968589d8	702	#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) \|\| \
Kojto	90:cb3d968589d8	703	((POLARITY) == UART_DE_POLARITY_LOW))
Kojto	90:cb3d968589d8	704	/**
Kojto	90:cb3d968589d8	705	* @}
Kojto	90:cb3d968589d8	706	*/
Kojto	90:cb3d968589d8	707
Kojto	90:cb3d968589d8	708	/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
Kojto	90:cb3d968589d8	709	* @{
Kojto	90:cb3d968589d8	710	*/
Kojto	90:cb3d968589d8	711	#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
Kojto	90:cb3d968589d8	712	/**
Kojto	90:cb3d968589d8	713	* @}
Kojto	90:cb3d968589d8	714	*/
Kojto	90:cb3d968589d8	715
Kojto	90:cb3d968589d8	716	/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
Kojto	90:cb3d968589d8	717	* @{
Kojto	90:cb3d968589d8	718	*/
Kojto	90:cb3d968589d8	719	#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
Kojto	90:cb3d968589d8	720	/**
Kojto	90:cb3d968589d8	721	* @}
Kojto	90:cb3d968589d8	722	*/
Kojto	90:cb3d968589d8	723
Kojto	90:cb3d968589d8	724	/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
Kojto	90:cb3d968589d8	725	* @{
Kojto	90:cb3d968589d8	726	*/
Kojto	90:cb3d968589d8	727	#define UART_IT_MASK ((uint32_t)0x001F)
Kojto	90:cb3d968589d8	728	/**
Kojto	90:cb3d968589d8	729	* @}
Kojto	90:cb3d968589d8	730	*/
Kojto	90:cb3d968589d8	731
Kojto	90:cb3d968589d8	732	/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
Kojto	90:cb3d968589d8	733	* @{
Kojto	90:cb3d968589d8	734	*/
Kojto	90:cb3d968589d8	735	#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF
Kojto	90:cb3d968589d8	736	/**
Kojto	90:cb3d968589d8	737	* @}
Kojto	90:cb3d968589d8	738	*/
Kojto	90:cb3d968589d8	739
Kojto	90:cb3d968589d8	740	/**
Kojto	90:cb3d968589d8	741	* @}
Kojto	90:cb3d968589d8	742	*/
Kojto	90:cb3d968589d8	743
Kojto	90:cb3d968589d8	744	/* Exported macros -----------------------------------------------------------*/
Kojto	90:cb3d968589d8	745	/** @defgroup UART_Exported_Macros UART Exported Macros
Kojto	90:cb3d968589d8	746	* @{
Kojto	90:cb3d968589d8	747	*/
Kojto	90:cb3d968589d8	748
Kojto	90:cb3d968589d8	749	/** @brief Reset UART handle state
Kojto	90:cb3d968589d8	750	* @param __HANDLE__: UART handle.
Kojto	90:cb3d968589d8	751	* @retval None
Kojto	90:cb3d968589d8	752	*/
Kojto	90:cb3d968589d8	753	#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
Kojto	90:cb3d968589d8	754
Kojto	90:cb3d968589d8	755	/** @brief Checks whether the specified UART flag is set or not.
Kojto	90:cb3d968589d8	756	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	757	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
Kojto	90:cb3d968589d8	758	* UART peripheral (datasheet: up to five USART/UARTs)
Kojto	90:cb3d968589d8	759	* @param __FLAG__: specifies the flag to check.
Kojto	90:cb3d968589d8	760	* This parameter can be one of the following values:
Kojto	90:cb3d968589d8	761	* @arg UART_FLAG_REACK: Receive enable ackowledge flag
Kojto	90:cb3d968589d8	762	* @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
Kojto	90:cb3d968589d8	763	* @arg UART_FLAG_WUF: Wake up from stop mode flag
Kojto	90:cb3d968589d8	764	* @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
Kojto	90:cb3d968589d8	765	* @arg UART_FLAG_SBKF: Send Break flag
Kojto	90:cb3d968589d8	766	* @arg UART_FLAG_CMF: Character match flag
Kojto	90:cb3d968589d8	767	* @arg UART_FLAG_BUSY: Busy flag
Kojto	90:cb3d968589d8	768	* @arg UART_FLAG_ABRF: Auto Baud rate detection flag
Kojto	90:cb3d968589d8	769	* @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
Kojto	90:cb3d968589d8	770	* @arg UART_FLAG_EOBF: End of block flag
Kojto	90:cb3d968589d8	771	* @arg UART_FLAG_RTOF: Receiver timeout flag
Kojto	90:cb3d968589d8	772	* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
Kojto	90:cb3d968589d8	773	* @arg UART_FLAG_LBD: LIN Break detection flag
Kojto	90:cb3d968589d8	774	* @arg UART_FLAG_TXE: Transmit data register empty flag
Kojto	90:cb3d968589d8	775	* @arg UART_FLAG_TC: Transmission Complete flag
Kojto	90:cb3d968589d8	776	* @arg UART_FLAG_RXNE: Receive data register not empty flag
Kojto	90:cb3d968589d8	777	* @arg UART_FLAG_IDLE: Idle Line detection flag
Kojto	90:cb3d968589d8	778	* @arg UART_FLAG_ORE: OverRun Error flag
Kojto	90:cb3d968589d8	779	* @arg UART_FLAG_NE: Noise Error flag
Kojto	90:cb3d968589d8	780	* @arg UART_FLAG_FE: Framing Error flag
Kojto	90:cb3d968589d8	781	* @arg UART_FLAG_PE: Parity Error flag
Kojto	90:cb3d968589d8	782	* @retval The new state of __FLAG__ (TRUE or FALSE).
Kojto	90:cb3d968589d8	783	*/
Kojto	90:cb3d968589d8	784	#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
Kojto	90:cb3d968589d8	785
Kojto	90:cb3d968589d8	786	/** @brief Enables the specified UART interrupt.
Kojto	90:cb3d968589d8	787	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	788	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
Kojto	90:cb3d968589d8	789	* UART peripheral. (datasheet: up to five USART/UARTs)
Kojto	90:cb3d968589d8	790	* @param __INTERRUPT__: specifies the UART interrupt source to enable.
Kojto	90:cb3d968589d8	791	* This parameter can be one of the following values:
Kojto	90:cb3d968589d8	792	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
Kojto	90:cb3d968589d8	793	* @arg UART_IT_CM: Character match interrupt
Kojto	90:cb3d968589d8	794	* @arg UART_IT_CTS: CTS change interrupt
Kojto	90:cb3d968589d8	795	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	90:cb3d968589d8	796	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	90:cb3d968589d8	797	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	90:cb3d968589d8	798	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	90:cb3d968589d8	799	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	90:cb3d968589d8	800	* @arg UART_IT_PE: Parity Error interrupt
Kojto	90:cb3d968589d8	801	* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
Kojto	90:cb3d968589d8	802	* @retval None
Kojto	90:cb3d968589d8	803	*/
Kojto	90:cb3d968589d8	804	#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	90:cb3d968589d8	805	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	90:cb3d968589d8	806	((__HANDLE__)->Instance->CR3 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
Kojto	90:cb3d968589d8	807
Kojto	90:cb3d968589d8	808
Kojto	90:cb3d968589d8	809	/** @brief Disables the specified UART interrupt.
Kojto	90:cb3d968589d8	810	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	811	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
Kojto	90:cb3d968589d8	812	* UART peripheral. (datasheet: up to five USART/UARTs)
Kojto	90:cb3d968589d8	813	* @param __INTERRUPT__: specifies the UART interrupt source to disable.
Kojto	90:cb3d968589d8	814	* This parameter can be one of the following values:
Kojto	90:cb3d968589d8	815	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
Kojto	90:cb3d968589d8	816	* @arg UART_IT_CM: Character match interrupt
Kojto	90:cb3d968589d8	817	* @arg UART_IT_CTS: CTS change interrupt
Kojto	90:cb3d968589d8	818	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	90:cb3d968589d8	819	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	90:cb3d968589d8	820	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	90:cb3d968589d8	821	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	90:cb3d968589d8	822	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	90:cb3d968589d8	823	* @arg UART_IT_PE: Parity Error interrupt
Kojto	90:cb3d968589d8	824	* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
Kojto	90:cb3d968589d8	825	* @retval None
Kojto	90:cb3d968589d8	826	*/
Kojto	90:cb3d968589d8	827	#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	90:cb3d968589d8	828	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	90:cb3d968589d8	829	((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
Kojto	90:cb3d968589d8	830
Kojto	90:cb3d968589d8	831	/** @brief Checks whether the specified UART interrupt has occurred or not.
Kojto	90:cb3d968589d8	832	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	833	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
Kojto	90:cb3d968589d8	834	* UART peripheral. (datasheet: up to five USART/UARTs)
Kojto	90:cb3d968589d8	835	* @param __IT__: specifies the UART interrupt to check.
Kojto	90:cb3d968589d8	836	* This parameter can be one of the following values:
Kojto	90:cb3d968589d8	837	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
Kojto	90:cb3d968589d8	838	* @arg UART_IT_CM: Character match interrupt
Kojto	90:cb3d968589d8	839	* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
Kojto	90:cb3d968589d8	840	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	90:cb3d968589d8	841	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	90:cb3d968589d8	842	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	90:cb3d968589d8	843	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	90:cb3d968589d8	844	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	90:cb3d968589d8	845	* @arg UART_IT_ORE: OverRun Error interrupt
Kojto	90:cb3d968589d8	846	* @arg UART_IT_NE: Noise Error interrupt
Kojto	90:cb3d968589d8	847	* @arg UART_IT_FE: Framing Error interrupt
Kojto	90:cb3d968589d8	848	* @arg UART_IT_PE: Parity Error interrupt
Kojto	90:cb3d968589d8	849	* @retval The new state of __IT__ (TRUE or FALSE).
Kojto	90:cb3d968589d8	850	*/
Kojto	90:cb3d968589d8	851	#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
Kojto	90:cb3d968589d8	852
Kojto	90:cb3d968589d8	853	/** @brief Checks whether the specified UART interrupt source is enabled.
Kojto	90:cb3d968589d8	854	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	855	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
Kojto	90:cb3d968589d8	856	* UART peripheral. (datasheet: up to five USART/UARTs)
Kojto	90:cb3d968589d8	857	* @param __IT__: specifies the UART interrupt source to check.
Kojto	90:cb3d968589d8	858	* This parameter can be one of the following values:
Kojto	90:cb3d968589d8	859	* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
Kojto	90:cb3d968589d8	860	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	90:cb3d968589d8	861	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	90:cb3d968589d8	862	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	90:cb3d968589d8	863	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	90:cb3d968589d8	864	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	90:cb3d968589d8	865	* @arg UART_IT_ORE: OverRun Error interrupt
Kojto	90:cb3d968589d8	866	* @arg UART_IT_NE: Noise Error interrupt
Kojto	90:cb3d968589d8	867	* @arg UART_IT_FE: Framing Error interrupt
Kojto	90:cb3d968589d8	868	* @arg UART_IT_PE: Parity Error interrupt
Kojto	90:cb3d968589d8	869	* @retval The new state of __IT__ (TRUE or FALSE).
Kojto	90:cb3d968589d8	870	*/
Kojto	90:cb3d968589d8	871	#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
Kojto	90:cb3d968589d8	872	(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
Kojto	90:cb3d968589d8	873
Kojto	90:cb3d968589d8	874	/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
Kojto	90:cb3d968589d8	875	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	876	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
Kojto	90:cb3d968589d8	877	* UART peripheral. (datasheet: up to five USART/UARTs)
Kojto	90:cb3d968589d8	878	* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
Kojto	90:cb3d968589d8	879	* to clear the corresponding interrupt
Kojto	90:cb3d968589d8	880	* This parameter can be one of the following values:
Kojto	90:cb3d968589d8	881	* @arg UART_CLEAR_PEF: Parity Error Clear Flag
Kojto	90:cb3d968589d8	882	* @arg UART_CLEAR_FEF: Framing Error Clear Flag
Kojto	90:cb3d968589d8	883	* @arg UART_CLEAR_NEF: Noise detected Clear Flag
Kojto	90:cb3d968589d8	884	* @arg UART_CLEAR_OREF: OverRun Error Clear Flag
Kojto	90:cb3d968589d8	885	* @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
Kojto	90:cb3d968589d8	886	* @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
Kojto	90:cb3d968589d8	887	* @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
Kojto	90:cb3d968589d8	888	* @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
Kojto	90:cb3d968589d8	889	* @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
Kojto	90:cb3d968589d8	890	* @arg UART_CLEAR_EOBF: End Of Block Clear Flag
Kojto	90:cb3d968589d8	891	* @arg UART_CLEAR_CMF: Character Match Clear Flag
Kojto	90:cb3d968589d8	892	* @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
Kojto	90:cb3d968589d8	893	* @retval None
Kojto	90:cb3d968589d8	894	*/
Kojto	90:cb3d968589d8	895	#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
Kojto	90:cb3d968589d8	896
Kojto	90:cb3d968589d8	897	/** @brief Set a specific UART request flag.
Kojto	90:cb3d968589d8	898	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	899	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
Kojto	90:cb3d968589d8	900	* UART peripheral. (datasheet: up to five USART/UARTs)
Kojto	90:cb3d968589d8	901	* @param __REQ__: specifies the request flag to set
Kojto	90:cb3d968589d8	902	* This parameter can be one of the following values:
Kojto	90:cb3d968589d8	903	* @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
Kojto	90:cb3d968589d8	904	* @arg UART_SENDBREAK_REQUEST: Send Break Request
Kojto	90:cb3d968589d8	905	* @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
Kojto	90:cb3d968589d8	906	* @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
Kojto	90:cb3d968589d8	907	* @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
Kojto	90:cb3d968589d8	908	* @retval None
Kojto	90:cb3d968589d8	909	*/
Kojto	90:cb3d968589d8	910	#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR \|= (uint32_t)(__REQ__))
Kojto	90:cb3d968589d8	911
Kojto	90:cb3d968589d8	912	/** @brief Enable UART
Kojto	90:cb3d968589d8	913	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	914	* The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
Kojto	90:cb3d968589d8	915	* @retval None
Kojto	90:cb3d968589d8	916	*/
Kojto	90:cb3d968589d8	917	#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 \|= USART_CR1_UE)
Kojto	90:cb3d968589d8	918
Kojto	90:cb3d968589d8	919	/** @brief Disable UART
Kojto	90:cb3d968589d8	920	* @param __HANDLE__: specifies the UART Handle.
Kojto	90:cb3d968589d8	921	* The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
Kojto	90:cb3d968589d8	922	* @retval None
Kojto	90:cb3d968589d8	923	*/
Kojto	90:cb3d968589d8	924	#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
Kojto	90:cb3d968589d8	925
Kojto	90:cb3d968589d8	926	/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
Kojto	90:cb3d968589d8	927	* @param _PCLK_: UART clock
Kojto	90:cb3d968589d8	928	* @param _BAUD_: Baud rate set by the user
Kojto	90:cb3d968589d8	929	* @retval Division result
Kojto	90:cb3d968589d8	930	*/
Kojto	90:cb3d968589d8	931	#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
Kojto	90:cb3d968589d8	932
Kojto	90:cb3d968589d8	933	/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
Kojto	90:cb3d968589d8	934	* @param _PCLK_: UART clock
Kojto	90:cb3d968589d8	935	* @param _BAUD_: Baud rate set by the user
Kojto	90:cb3d968589d8	936	* @retval Division result
Kojto	90:cb3d968589d8	937	*/
Kojto	90:cb3d968589d8	938	#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
Kojto	90:cb3d968589d8	939
Kojto	90:cb3d968589d8	940	/** @brief Check UART Baud rate
Kojto	90:cb3d968589d8	941	* @param BAUDRATE: Baudrate specified by the user
Kojto	90:cb3d968589d8	942	* The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz)
Kojto	90:cb3d968589d8	943	* divided by the smallest oversampling used on the USART (i.e. 8)
Kojto	90:cb3d968589d8	944	* @retval Test result (TRUE or FALSE).
Kojto	90:cb3d968589d8	945	*/
Kojto	90:cb3d968589d8	946	#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
Kojto	90:cb3d968589d8	947
Kojto	90:cb3d968589d8	948	/** @brief Check UART assertion time
Kojto	90:cb3d968589d8	949	* @param TIME: 5-bit value assertion time
Kojto	90:cb3d968589d8	950	* @retval Test result (TRUE or FALSE).
Kojto	90:cb3d968589d8	951	*/
Kojto	90:cb3d968589d8	952	#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
Kojto	90:cb3d968589d8	953
Kojto	90:cb3d968589d8	954	/** @brief Check UART deassertion time
Kojto	90:cb3d968589d8	955	* @param TIME: 5-bit value deassertion time
Kojto	90:cb3d968589d8	956	* @retval Test result (TRUE or FALSE).
Kojto	90:cb3d968589d8	957	*/
Kojto	90:cb3d968589d8	958	#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
Kojto	90:cb3d968589d8	959
Kojto	90:cb3d968589d8	960	/**
Kojto	90:cb3d968589d8	961	* @}
Kojto	90:cb3d968589d8	962	*/
Kojto	90:cb3d968589d8	963
Kojto	90:cb3d968589d8	964	/* Include UART HAL Extended module */
Kojto	90:cb3d968589d8	965	#include "stm32f3xx_hal_uart_ex.h"
Kojto	90:cb3d968589d8	966
Kojto	90:cb3d968589d8	967	/* Exported functions --------------------------------------------------------*/
Kojto	90:cb3d968589d8	968	/** @addtogroup UART_Exported_Functions UART Exported Functions
Kojto	90:cb3d968589d8	969	* @{
Kojto	90:cb3d968589d8	970	*/
Kojto	90:cb3d968589d8	971
Kojto	90:cb3d968589d8	972	/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
Kojto	90:cb3d968589d8	973	* @brief Initialization and Configuration functions
Kojto	90:cb3d968589d8	974	* @{
Kojto	90:cb3d968589d8	975	*/
Kojto	90:cb3d968589d8	976	/* Initialization and de-initialization functions ****************************/
Kojto	90:cb3d968589d8	977	HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	978	HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	979	HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
Kojto	90:cb3d968589d8	980	HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
Kojto	90:cb3d968589d8	981	HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	982	void HAL_UART_MspInit(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	983	void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	984	/**
Kojto	90:cb3d968589d8	985	* @}
Kojto	90:cb3d968589d8	986	*/
Kojto	90:cb3d968589d8	987
Kojto	90:cb3d968589d8	988	/** @addtogroup UART_Exported_Functions_Group2 Input and Output operation functions
Kojto	90:cb3d968589d8	989	* @brief UART Transmit/Receive functions
Kojto	90:cb3d968589d8	990	* @{
Kojto	90:cb3d968589d8	991	*/
Kojto	90:cb3d968589d8	992	/* IO operation functions *****************************************************/
Kojto	90:cb3d968589d8	993	HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
Kojto	90:cb3d968589d8	994	HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
Kojto	90:cb3d968589d8	995	HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	90:cb3d968589d8	996	HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	90:cb3d968589d8	997	HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	90:cb3d968589d8	998	HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	90:cb3d968589d8	999	HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1000	HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1001	HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1002	void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1003	void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1004	void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1005	void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1006	void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1007	void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1008	void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1009
Kojto	90:cb3d968589d8	1010	HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
Kojto	90:cb3d968589d8	1011	/**
Kojto	90:cb3d968589d8	1012	* @}
Kojto	90:cb3d968589d8	1013	*/
Kojto	90:cb3d968589d8	1014
Kojto	90:cb3d968589d8	1015	/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
Kojto	90:cb3d968589d8	1016	* @brief UART control functions
Kojto	90:cb3d968589d8	1017	* @{
Kojto	90:cb3d968589d8	1018	*/
Kojto	90:cb3d968589d8	1019	/* Peripheral Control functions ***********************************************/
Kojto	90:cb3d968589d8	1020	HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1021	HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1022	void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1023	HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1024	HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1025	HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1026	HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1027
Kojto	90:cb3d968589d8	1028	HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1029	void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1030	void UART_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
Kojto	90:cb3d968589d8	1031	/**
Kojto	90:cb3d968589d8	1032	* @}
Kojto	90:cb3d968589d8	1033	*/
Kojto	90:cb3d968589d8	1034
Kojto	90:cb3d968589d8	1035	/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
Kojto	90:cb3d968589d8	1036	* @brief Peripheral State and Error functions
Kojto	90:cb3d968589d8	1037	* @{
Kojto	90:cb3d968589d8	1038	*/
Kojto	90:cb3d968589d8	1039	/* Peripheral State and Error functions ***************************************/
Kojto	90:cb3d968589d8	1040	HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1041	uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
Kojto	90:cb3d968589d8	1042	/**
Kojto	90:cb3d968589d8	1043	* @}
Kojto	90:cb3d968589d8	1044	*/
Kojto	90:cb3d968589d8	1045
Kojto	90:cb3d968589d8	1046	/**
Kojto	90:cb3d968589d8	1047	* @}
Kojto	90:cb3d968589d8	1048	*/
Kojto	90:cb3d968589d8	1049
Kojto	90:cb3d968589d8	1050	/**
Kojto	90:cb3d968589d8	1051	* @}
Kojto	90:cb3d968589d8	1052	*/
Kojto	90:cb3d968589d8	1053
Kojto	90:cb3d968589d8	1054	/**
Kojto	90:cb3d968589d8	1055	* @}
Kojto	90:cb3d968589d8	1056	*/
Kojto	90:cb3d968589d8	1057
Kojto	90:cb3d968589d8	1058	#ifdef __cplusplus
Kojto	90:cb3d968589d8	1059	}
Kojto	90:cb3d968589d8	1060	#endif
Kojto	90:cb3d968589d8	1061
Kojto	90:cb3d968589d8	1062	#endif /* __STM32F3xx_HAL_UART_H */
Kojto	90:cb3d968589d8	1063
Kojto	90:cb3d968589d8	1064	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	31 Mar 2015
Imports:	13
Forks:	0
Commits:	99
Dependents:	0
Dependencies:	0
Followers:	1

TARGET_NUCLEO_F302R8/stm32f3xx_hal_uart.h@90:cb3d968589d8, 2014-10-28 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning