LE YOU
/
X_NUCLEO_IKS01A1
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
X_NUCLEO_IKS01A1
by 
ST
Diff: Components/lsm6ds3/lsm6ds3.h
- Revision:
- 44:d757094f6229
diff -r 2544d064d528 -r d757094f6229 Components/lsm6ds3/lsm6ds3.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/lsm6ds3/lsm6ds3.h Mon Jun 08 15:36:36 2015 +0200
@@ -0,0 +1,1481 @@
+/**
+ ******************************************************************************
+ * @file lsm6ds3.h
+ * @author MEMS Application Team
+ * @version V1.2.0
+ * @date 28-May-2015
+ * @brief This file contains definitions for the lsm6ds3.c firmware driver
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __LSM6DS3_H
+#define __LSM6DS3_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "imu_6axes.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup LSM6DS3
+ * @{
+ */
+
+/** @addtogroup LSM6DS3_Exported_Defines LSM6DS3_Exported_Defines
+ * @{
+ */
+#ifndef NULL
+#define NULL (void *) 0
+#endif
+
+/******************************************************************************/
+/*********** START ACCELEROMETER AND GYROSCOPE REGISTER MAPPING **************/
+/******************************************************************************/
+
+
+/***************************************** COMMON REGISTERS ********************************************/
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] FUNC_CFG_EN: Enable access to the embedded functions configuration registers (1) from address 02h to 32h. Default value: 0.
+ * [6:0] This bit must be set to �0� for the correct operation of the device
+ * \endcode
+*/
+#define LSM6DS3_XG_FUNC_CFG_ACCESS 0x01
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:0] TPH_[7:0]: Sensor SyncronizationTime Frame with the step of 500ms and full range of 5s. Default: 0000 0000
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSOR_SYNC_TIME_FRAME 0x04
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:2] This bit must be set to �0� for the correct operation of the device
+ * [1] HP_RST: Gyro digital HP filter reset. Default: 0
+ * [1] SENSOR_SYNC_ENHP_RST: Enable sensor synchronization feature. Default 0
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSOR_SYNC_ENABLE 0x05
+
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:0] FTH_7-0 FIFO threshold level setting - watermark flag is toggled when the number of bytes written to FIFO is greater or equal to threshold level.
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_CTRL1 0x06
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] TIMER_PEDO_FIFO_EN: Enable Pedometer step counter and time stamp as 4th sensor FIFO data. Default: 0 disabled
+ * [6] TIMER_PEDO_FIFO_DRDY : Pedometer FIFO write mode. Default: 0 disabled
+ * [5:4] This bit must be set to �0� for the correct operation of the device
+ * [3:0] FTH_[11:8] FIFO threshold level setting(1). Default value: 0000
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_CTRL2 0x07
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:6] This bit must be set to �0� for the correct operation of the device
+ * [5:3] DEC_FIFO_GYRO[2:0]: Gyro FIFO decimation setting. Default value: 000
+ * [2:0] DEC_FIFO_XL[2:0]: XL FIFO decimation setting. Default value: 000
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_CTRL3 0x08
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] This bit must be set to �0� for the correct operation of the device
+ * [6] ONLY_HIGH_DATA :8 bit data storing in FIFO. Default: 0
+ * [5:3] DEC_SLV1_FIFO[2:0] Second external sensor FIFO decimation setting. Default: 000
+ * [2:0] DEC_SLV1_FIFO[2:0] First external sensor FIFO decimation setting. Default: 000
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_CTRL4 0x09
+
+
+/**
+ * @brief FIFO control register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] This bit must be set to �0� for the correct operation of the device
+ * [6:3] ODR_FIFO_[3:0]: FIFO ODR selection. Default: 0000
+ * [2:0] FIFO_MODE_[2:0] : FIFO mode selection bits. Default value: 000
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_CTRL5 0x0A
+
+
+/**
+ * @brief Angular rate sensor sign and orientation register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:6] This bit must be set to �0� for the correct operation of the device
+ * [5] SignX_G: Pitch axis (X) Angular rate sign. Default value: 0
+ * [5] SignY_G: Roll axis (Y) Angular rate sign. Default value: 0
+ * [5] SignZ_G: Pitch axis (Z) Angular rate sign. Default value: 0
+ * [2:0] Orient[2:0] : Directional user orientation selection. Default Value: 000
+ * \endcode
+*/
+#define LSM6DS3_XG_ORIENT_CFG_G 0x0B
+
+/**
+ * @brief INT1 pad control registrer
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] INT1_PEDO: Pedometer step recognition interrupt enable on INT1 pad. Default value: 0
+ * [6] INT1_SIGN_MOT: Significant motion interrupt enable on INT1 pad. Default value: 0
+ * [5] INT1_FULL_FLAG: Full flag Interrupt Enable on INT1 pad. Default value: 0
+ * [4] INT1_OVR: Overrun Interrupt on INT1 pad. Default value: 0
+ * [3] INT1_FTH: FIFO threshold interrupt on INT1 pad. Default value: 0
+ * [2] INT1_BOOT: Overrun Interrupt on INT1 pad. Default value: 0
+ * [1] INT1_DRDY_G: Gyroscope Data Ready on INT1 pad. Default value: 0.
+ * [0] INT1_DRDY_XL: Accelerometer Data Ready on INT1 pad. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_INT1_CTRL 0x0D
+
+
+//new, done
+/**
+ * @brief INT2 pad control registrer
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] INT2_PEDO: Pedometer step recognition interrupt enable on INT1 pad. Default value: 0
+ * [6] INT2_SIGN_MOT: Significant motion interrupt enable on INT1 pad. Default value: 0
+ * [5] INT2_FULL_FLAG: Full flag Interrupt Enable on INT1 pad. Default value: 0
+ * [4] INT2_OVR: Overrun Interrupt on INT1 pad. Default value: 0
+ * [3] INT2_FTH: FIFO threshold interrupt on INT1 pad. Default value: 0
+ * [2] INT2_BOOT: Overrun Interrupt on INT1 pad. Default value: 0
+ * [1] INT2_DRDY_G: Gyroscope Data Ready on INT1 pad. Default value: 0.
+ * [0] INT2_DRDY_XL: Accelerometer Data Ready on INT1 pad. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_INT2_CTRL 0x0E
+
+
+/**
+ * @brief Device identifier register.
+ * \code
+ * Read
+ * Default value:69
+ * [7:0] This read-only register contains the device identifier
+ * \endcode
+*/
+#define LSM6DS3_XG_WHO_AM_I_ADDR 0x0F
+
+
+/**
+ * @brief Control Register 3
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] BOOT: Reboot memory content. Default value: 0
+ * [6] BDU: Block Data Update. Default value: 0
+ * [5] H_LACTIVE: Interrupt activation level. Default value: 0
+ * [4] PP_OD: Push-pull/Open Drain selection on INT pad. Default value: 0
+ * [3] SIM: SPI Serial Interface Mode selection. Default value: 0
+ * [2] IF_INC: Register address automatically incremented during a multiple byte access with a serial interface (I2C or SPI). Default value: 0
+ * [1] BLE: Big/Little Endian Data Selection. Default value: 0
+ * [0] SW_RESET: Software Reset. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_CTRL3_C 0x12
+
+/**
+ * @brief Control Register 4
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] BW_SCAL_ODR: Accelerometer bandwidth selection. Default value: 0
+ * [6] SLEEP_G: Gyroscope sleep mode enable. Default value: 0
+ * [5] INT2_on_INT1: All interrupt signals available on INT1 pad enable. Default value: 0
+ * [4] This bit must be set to �0� for the correct operation of the device
+ * [3] DRDY_MASK: Configuration 1(3) Data Available Enable bit. Default Value: 0
+ * [2] I2C_disable Disable I2C interface. Default value: 0
+ * [1] MODE3_EN Enable auxiliary SPI interface (Mode3, refer to Table 1.). Default value: 0
+ * [0] STOP_ON_FTH Enable FIFO threshold level use. Default value: 0.
+
+ * \endcode
+*/
+#define LSM6DS3_XG_CTRL4_C 0x13
+
+/**
+ * @brief Control Register 4
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:4] This bit must be set to �0� for the correct operation of the device
+ * [3:2] ST_G[1:0]: Angular rate sensor Self Test Enable. Default value: 00
+ * [1:0] ST_XL[1:0]: Linear acceleration sensor Self Test Enable. Default value: 00
+ * \endcode
+*/
+#define LSM6DS3_XG_CTRL5_C 0x14
+
+
+/**
+ * @brief Control Register 10
+ * \code
+ * Read/write
+ * Default value: 0x38
+ * [7:6] These bits must be set to �0� for the correct operation of the device
+ * [5] Zen_G: Gyroscope�s Z-axis output enable. Default value: 1
+ * [4] Yen_G: Gyroscope�s Y-axis output enable. Default value: 1
+ * [3] Xen_G: Gyroscope�s X-axis output enable. Default value: 1
+ * [2] FUNC_EN: Enable embedded functionalities (pedometer, tilt and significant motion) . Default value: 0
+ * [1] PEDO_RST_STEP: Reset pedometer step counter . Default value: 0
+ * [0] SIGN_MOTION_EN: Enable significant motion function. For a correct functionality of significant motion function, TILT_EN bit in FUNC_SRC (53h) register must be set to 1 . Default value: 1
+ * \endcode
+*/
+#define LSM6DS3_XG_CTRL10_C 0x19
+
+
+/**
+ * @brief Sensor hub Master config Register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] DRDY_ON_INT1:Manage the DRDY signal on INT1 pad. Default: 0
+ * [6] DATA_VALID_SEL_FIFO: Selection of FIFO data-valid signal. Default value: 0
+ * [5] This bit must be set to �0� for the correct operation of the device
+ * [4] START_CONFIG: Sensor Hub trigger signal selection. Default value: 0
+ * [3] PULL_UP_EN: Auxiliary I2C pull-up. Default value: 0
+ * [2] PASS_THROUGH_MODE: I2C interface pass-through. Default value: 0
+ * [1] IRON_EN:Enable soft iron correction algorithm for magnetometer. Default value: 0.
+ * [0] MASTER_ON: Sensor Hub I2C master enable. Default: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_MASTER_CONFIG 0x1A
+
+
+/**
+ * @brief Wake up interrupt source register
+ * \code
+ * Read
+ * Default value: output
+ * [7:6] This bit must be set to �0� for the correct operation of the device
+ * [5] FF_IA: Free fall event detection status. Default: 0
+ * [4] SLEEP_STATE_IA: Sleep event status. Default value: 0
+ * [3] WU_IA: Wake up event detection status. Default
+ * [2] X_WU: detection status on X axis. Default value: 0
+ * [1] Y_WU: detection status on Y axis. Default value: 0
+ * [0] Z_WU: detection status on Z axis. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_WAKE_UP_SRC 0x1B
+
+/**
+ * @brief Tap source register
+ * \code
+ * Read
+ * Default value: output
+ * [7] This bit must be set to �0� for the correct operation of the device
+ * [6] TAP_IA: Tap event detection status. Default: 0
+ * [5] SINGLE_TAP: Single tap event status. Default value: 0
+ * [4] DOUBLE_TAP: Double tap event detection status. Default value: 0
+ * [3] TAP_SIGN: Sign of acceleration detected by tap event. Default: 0
+ * [2] X_TAP: Tap event detection status on X axis. Default value: 0
+ * [1] Y_TAP: Tap event detection status on Y axis. Default value: 0
+ * [0] Z_TAP: Tap event detection status on Z axis. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_TAP_SRC 0x1C
+
+/**
+ * @brief Portrait, landscape face-up and face-down source register
+ * \code
+ * Read
+ * Default value: output
+ * [7] This bit must be set to �0� for the correct operation of the device
+ * [6] D6D_IA: Interrupt active for change position portrait, landscape, face-up, face-down. Default value: 0
+ * [5] ZH: Z-axis high event (over-threshold). Default value: 0
+ * [4] ZL: Z-axis low event (under-threshold). Default value: 0
+ * [5] YH: Y-axis high event (over-threshold). Default value: 0
+ * [4] YL: Y-axis low event (under-threshold). Default value: 0
+ * [5] X_H: X-axis high event (over-threshold). Default value: 0
+ * [4] X_L: X-axis low event (under-threshold). Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_D6D_SRC 0x1D
+
+/**
+ * @brief Status register
+ * \code
+ * Read
+ * Default value: output
+ * [7:4] No meaning set
+ * [3] EV_BOOT: Boot running flag signal. Default value: 0
+ * [2] No meaning set
+ * [1] GDA: Gyroscope new data avaialble. Default value: 0
+ * [0] XLDA: Accelerometer new data avaialble. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_STATUS_REG 0x1E
+
+/**
+ * @brief FIFO status control register
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] DIFF_FIFO_[7:0]: Number of unread words (16 bit axes) stored in FIFO . For a complete number of unread samples, consider DIFF_FIFO [11:8] in FIFO_STATUS2 (3Bh)
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_STATUS1 0x3A
+
+/**
+ * @brief FIFO status control register (r). For a proper reading of the register it is suggested to set BDU bit in CTRL3_C (12h) to 0.
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7] FTH FIFO watermark status. Deafult value: 0
+ * [6] OVER_RUN: FIFO overrun status. Default value: 0
+ * [5] FIFO_FULL: FIFO full status. Default value: 0
+ * [5] FIFO_EMPTY: FIFO empty bit. Default value: 0; 0: FIFO contains data; 1: FIFO is empty
+ * [3:0] DIFF_FIFO_[11:8] Number of unread words (16 bit axes) stored in FIFO : For a complete number of unread samples, consider DIFF_FIFO [11:8] in FIFO_STATUS1 (3Ah)
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_STATUS2 0x3B
+
+/**
+ * @brief FIFO status control register (r). For a proper reading of the register it is suggested to set BDU bit in CTRL3_C (12h) to 0
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] FIFO_PATTERN_[7:0] : Word of recursive pattern read at the next reading
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_STATUS3 0x3C
+
+/**
+ * @brief FIFO status control register (r). For a proper reading of the register it is suggested to set BDU bit in CTRL3_C (12h) to 0
+ * \code
+ * Read
+ * Default value: 0x00
+ * [1:0] FIFO_PATTERN_[9:8] : Word of recursive pattern read at the next reading
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_STATUS4 0x3D
+
+/**
+ * @brief FIFO status control register (r). For a proper reading of the register it is suggested to set BDU bit in CTRL3_C (12h) to 0.
+ * \code
+ * Read
+ * Default value: 0x00
+ * [4:0] FIFO_PATTERN_[9:8] : Word of recursive pattern read at the next reading
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_STATUS4 0x3D
+
+/**
+ * @brief FIFO data output register (r). For a proper reading of the register it is suggested to set BDU bit in CTRL3_C (12h) to 0.
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] DATA_OUT_FIFO_L_[7:0]: FIFO data output (First byte)
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_DATA_OUT_L 0x3E
+
+/**
+ * @brief FIFO data output register (r). For a proper reading of the register it is suggested to set BDU bit in CTRL3_C (12h) to 0.
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] DATA_OUT_FIFO_H_[7:0]: FIFO data output (second byte)
+ * \endcode
+*/
+#define LSM6DS3_XG_FIFO_DATA_OUT_H 0x3F
+
+/**
+ * @brief Time stamp first byte data output register (r). The value is expressed as 24 bit and the bit resolution is defined by setting value in WAKE_UP_DUR (5Ch).
+ * \code
+ * Read
+ * Default value: output
+ * [7:0] TIMESTAMP0_[7:0]: FIFO first byte data output
+ * \endcode
+*/
+#define LSM6DS3_XG_TIMESTAMP0_REG 0x40
+
+/**
+ * @brief Time stamp second byte data output register (r). The value is expressed as 24 bit and the bit resolution is defined by setting value in WAKE_UP_DUR (5Ch).
+ * \code
+ * Read
+ * Default value: output
+ * [7:0] TIMESTAMP1_[7:0]: FIFO second byte data output
+ * \endcode
+*/
+#define LSM6DS3_XG_TIMESTAMP1_REG 0x41
+
+/**
+ * @brief Time stamp third byte data output register (r). The value is expressed as 24 bit and the bit resolution is defined by setting value in WAKE_UP_DUR (5Ch).
+ * \code
+ * Read
+ * Default value: output
+ * [7:0] TIMESTAMP2_[7:0]: FIFO third byte data output
+ * \endcode
+*/
+#define LSM6DS3_XG_TIMESTAMP2_REG 0x42
+
+/**
+ * @brief Step counter output register (r).
+ * \code
+ * Read
+ * Default value: output
+ * [7:0] STEP_COUNTER_L_[7:0]: Step counter output (LSbyte)
+ * \endcode
+*/
+#define LSM6DS3_XG_STEP_COUNTER_L 0x4B
+
+/**
+ * @brief Step counter output register (r).
+ * \code
+ * Read
+ * Default value: output
+ * [7:0] STEP_COUNTER_H_[7:0]: Step counter output (MSbyte)
+ * \endcode
+*/
+#define LSM6DS3_XG_STEP_COUNTER_H 0x4C
+
+/**
+ * @brief Significant motion, tilt, step detector, soft iron and sensor hub interrupt source register
+ * \code
+ * Read
+ * Default value: output
+ * [7] This bit must be set to �0� for the correct operation of the device
+ * [6] SIGN_MOTION_IA: Significant motion event detection status. Default value: 0
+ * [5] TILT_IA: Tilt event detection status. Default value: 0
+ * [5] STEP_DETECTED: Step detector event detection status. Default value: 0
+ * [3:2] This bit must be set to �0� for the correct operation of the device
+ * [1] SI_END_OP:Soft iron calculation status. Default value: 0
+ * [0] SENSORHUB_END_OP:Senso hub communication status. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_FUNC_SRC 0x53
+
+/**
+ * @brief Time stamp, pedometer, tilt, filtering, and tap recognition functions configuration register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] TIMER_EN: Time stamp count enable, output data are collected in TIMESTAMP0_REG (40h), TIMESTAMP1_REG (41h), TIMESTAMP2_REG (42h) register. Default: 0
+ * [6] PEDO_EN: Pedometer algorithm enable(1). Default value: 0
+ * [5] TILT_EN: Tilt calculation enable.(2) Default value: 0
+ * [4] This bit must be set to �0� for the correct operation of the device
+ * [3] TAP_X_EN: Enable X direction in tap recognition. Default value: 0
+ * [2] TAP_Y_EN: Enable Z direction in tap recognition. Default value: 0
+ * [1] TAP_Z_EN: Enable Z direction in tap recognition. Default value: 0
+ * [0] LIR: Relatch of the time stamp, pedometer, tilt, filtering, and tap recognition functions routed to PINs.
+ * \endcode
+*/
+#define LSM6DS3_XG_TAP_CFG 0x58
+
+/**
+ * @brief Portrait/landscape position and tap function threshold register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] This bit must be set to �0� for the correct operation of the device
+ * [6:5] SIXD_THS[1:0]: Threshold for D6D function. Default value: 00
+ * [4:0] TAP_THS[4:0]: Threshold for tap recognition. Default value: 0000
+ * \endcode
+*/
+#define LSM6DS3_XG_TAP_THS_6D 0x59
+
+/**
+ * @brief Tap recognition function setting register (r/w)
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:4] DUR[3:0]: Duration of maximum time gap for double tap recognition. Default: 0000
+ * [3:2] QUIET[1:0]: Expected quiet time after a tap detection. Default value: 00
+ * [1:0] SHOCK[1:0]: Maximum duration of over-threshold event. Default value: 00
+ * \endcode
+*/
+#define LSM6DS3_XG_INT_DUR2 0x5A
+
+/**
+ * @brief Tap recognition function setting register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] SINGLE_DOUBLE_TAP: Single/double tap event detection. Default: 0
+ * [6] INACTIVITY: Inactivity event enable. Default value: 0
+ * [5:0] WK_THS[5:0]:Threshold for wake-up. Default value: 0000
+ * \endcode
+*/
+#define LSM6DS3_XG_WAKE_UP_THS 0x5B
+
+/**
+ * @brief Free-fall, wake-up, time stamp and sleep mode functions duration setting register (r/w).
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] FF_DUR5:Free fall duration event. Default: 0
+ * [6:5] WAKE_DUR[1:0]: Wake up duration event. Default: 00
+ * [4] TIMER_HR: Time stamp register resolution setting(1). Default value: 0
+ * [3:0] SLEEP_DUR[3:0] : Duration to go in sleep mode. Default value: 0000
+ * \endcode
+*/
+#define LSM6DS3_XG_WAKE_UP_DUR 0x5C
+
+/**
+ * @brief Free-fall function duration setting register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:3] FF_DUR[4:0]: Free fall duration event. Default: 0. For the complete configuration of the free fall duration, refer to FF_DUR5 in WAKE_UP_DUR (5Ch) configuration
+ * [2:0] FF_THS[2:0]: Free fall threshold setting. Default: 000.
+ * \endcode
+*/
+#define LSM6DS3_XG_WAKE_FREE_FALL 0x5D
+
+/**
+ * @brief Functions routing on INT1 register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] INT1_INACT_STATE: Routing on INT1 of inactivity mode. Default: 0
+ * [6] INT1_SINGLE_TAP: Single tap recognition routing on INT1. Default: 0
+ * [5] INT1_WU: Routing of wake-up event on INT1. Default value: 0
+ * [4] INT1_FF: Routing of free-fall event on INT1. Default value: 0
+ * [3] INT1_TAP: Routing of tap event on INT1. Default value: 0
+ * [2] INT1_6D: Routing of 6D event on INT1. Default value: 0
+ * [1] INT1_TILT: Routing of tilt event on INT1. Default value: 0
+ * [0] INT1_TIMER: Routing of end counter event of timer on INT1. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_MD1_CFG 0x5E
+
+/**
+ * @brief Functions routing on INT2 register
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] INT2_INACT_STATE: Routing on INT1 of inactivity mode. Default: 0
+ * [6] INT2_SINGLE_TAP: Single tap recognition routing on INT1. Default: 0
+ * [5] INT2_WU: Routing of wake-up event on INT1. Default value: 0
+ * [4] INT2_FF: Routing of free-fall event on INT1. Default value: 0
+ * [3] INT2_TAP: Routing of tap event on INT1. Default value: 0
+ * [2] INT2_6D: Routing of 6D event on INT1. Default value: 0
+ * [1] INT2_TILT: Routing of tilt event on INT1. Default value: 0
+ * [0] INT2_TIMER: Routing of end counter event of timer on INT1. Default value: 0
+ * \endcode
+*/
+#define LSM6DS3_XG_MD2_CFG 0x5F
+
+/***************************************** SENSORHUB REGISTERS ********************************************/
+
+/**
+ * @brief SENSORHUB REGISTER 1 : SLV0 first external sensor, first axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB1[7:0]: SLV0 first external sensor, first byte of the first axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB1_REG 0x2E
+
+/**
+ * @brief SENSORHUB REGISTER 2 : SLV0 first external sensor, first axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB2[7:0]: SLV0 first external sensor, second byte of the first axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB2_REG 0x2F
+
+/**
+ * @brief SENSORHUB REGISTER 3 : SLV0 first external sensor, second axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB3[7:0]: SLV0 first external sensor, first byte of the second axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB3_REG 0x30
+
+/**
+ * @brief SENSORHUB REGISTER 4 : SLV0 first external sensor, second axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB4[7:0]: SLV0 first external sensor, second byte of the second axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB4_REG 0x31
+
+/**
+ * @brief SENSORHUB REGISTER 5 : SLV0 first external sensor, third axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB5[7:0]: SLV0 first external sensor, second byte of the second axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB5_REG 0x32
+
+/**
+ * @brief SENSORHUB REGISTER 6 : SLV0 first external sensor, third axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB6[7:0]: SLV0 first external sensor, second byte of the third axis
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB6_REG 0x33
+
+/**
+ * @brief SENSORHUB REGISTER 7 : SLV1 second external sensor, first axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB7[7:0]: SLV1 second external sensor, first byte of the first axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB7_REG 0x34
+
+/**
+ * @brief SENSORHUB REGISTER 8 : SLV1 second external sensor, first axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB8[7:0]: SLV1 second external sensor, second byte of the first axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB8_REG 0x35
+
+/**
+ * @brief SENSORHUB REGISTER 9 : SLV1 second external sensor,, second axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB9[7:0]: SLV1 second external sensor, first byte of the second axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB9_REG 0x36
+
+/**
+ * @brief SLV1 second external sensor, second axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB10[7:0]: SLV1 second external sensor, second byte of the second axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB10_REG 0x37
+
+/**
+ * @brief SLV1 second external sensor, third axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB11[7:0]: SLV1 second external sensor, first byte of the third axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB11_REG 0x38
+
+/**
+ * @brief SLV1 second external sensor, third axis output register (r). The value is expressed as 16bit word in two�s complement
+ * \code
+ * Read
+ * Default value: 0x00
+ * [7:0] SHUB12[7:0]: SLV1 second external sensor, second byte of the third axis.
+ * \endcode
+*/
+#define LSM6DS3_XG_SENSORHUB12_REG 0x39
+
+
+
+
+/***************************************** GYROSCOPE REGISTERS ********************************************/
+
+/**
+ * @brief Angular rate sensor Control Register 2
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:4] ODR_G[3:0]: Gyroscope output data rate selection
+ * [3:2] FS_G[1-0]: Gyroscope full-scale selection
+ * [1] FS_125: Gyroscope full-scale at 125 dps
+ * [0] This bit must be set to �0� for the correct operation of the device
+ * \endcode
+ */
+#define LSM6DS3_XG_CTRL2_G 0x11
+
+
+/**
+ * @brief Angular rate sensor Control Register 6
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7] TRIG_EN: Data edge sensitive trigger Enable. Default value: 0
+ * [6] LVLen: Data level sensitive trigger Enable. Default value: 0
+ * [5] LVL2en: Level sensitive latched Enable. Default value: 0
+ * [4] XL_H_MODE: High Performance operating mode disable for accelerometer(1). Default value: 0
+ * [3:0] This bit must be set to �0� for the correct operation of the device
+ * \endcode
+ */
+#define LSM6DS3_XG_CTRL6_G 0x15
+
+
+/**
+* @brief Angular rate sensor Control Register 7
+* \code
+* Read/write
+* Default value: 0x00
+* [7] G_H_MODE: High Performance operating mode disable for Gyroscope(1) . Default: 0
+* [6] HP_EN: High Pass filter Enable. Default Value: 0
+* [5:4] HPCF_G[1:0]: Gyroscope High Pass filter Cut Off frequency selection. Default value: 00
+* [3:0] This bit must be set to �0� for the correct operation of the device
+* \endcode
+*/
+#define LSM6DS3_XG_CTRL7_G 0x16
+
+/**
+ * @brief Gyroscope data (LSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_X_L_G 0x22
+
+
+/**
+ * @brief Gyroscope data (MSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_X_H_G 0x23
+
+
+/**
+ * @brief Gyroscope data (LSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Y_L_G 0x24
+
+
+/**
+ * @brief Gyroscope data (MSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Y_H_G 0x25
+
+
+/**
+ * @brief Gyroscope data (LSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Z_L_G 0x26
+
+
+/**
+ * @brief Gyroscope data (MSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Z_H_G 0x27
+
+
+
+/*************************************** ACCELEROMETER REGISTERS *******************************************/
+
+/**
+ * @brief Linear acceleration sensor Control Register 1
+ * \code
+ * Read/write
+ * Default value: 0x00
+ * [7:4] ODR_XL3-0: Accelerometer Output data rate and power mode selection
+ * [3:2] FS_XL1-0: Accelerometer full-scale selection
+ * [1:0] BW_XL1-0: Anti-aliasing filter bandwidth selection
+ * \endcode
+ */
+#define LSM6DS3_XG_CTRL1_XL 0x10
+
+/**
+* @brief XL sensor Control Register 8
+* \code
+* Read/write
+* Default value: 0x00
+* [7:3] This bit must be set to �0� for the correct operation of the device
+* [2] SLOPE_FDS: Enable HP filter on output registers and FIFO. Default value: 0
+* [1:0] This bit must be set to �0� for the correct operation of the device
+* \endcode
+*/
+#define LSM6DS3_XG_CTRL8_XL 0x17
+
+/**
+ * @brief Linear acceleration sensor Control Register 9
+ * \code
+ * Read/write
+ * Default value: 0x38
+ * [7:6] These bits must be set to �0� for the correct operation of the device
+ * [5] Zen_XL: Accelerometers�s Z-axis output enable
+ * [4] Yen_XL: Accelerometers�s Y-axis output enable
+ * [3] Xen_XL: Accelerometers�s X-axis output enable
+ * [2:0] These bits must be set to �0� for the correct operation of the device
+ * \endcode
+*/
+#define LSM6DS3_XG_CTRL9_XL 0x18
+
+
+/**
+ * @brief Accelerometer data (LSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_X_L_XL 0x28
+
+
+/**
+ * @brief Accelerometer data (MSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_X_H_XL 0x29
+
+
+/**
+ * @brief Accelerometer data (LSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Y_L_XL 0x2A
+
+
+/**
+ * @brief Accelerometer data (MSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Y_H_XL 0x2B
+
+
+/**
+ * @brief Accelerometer data (LSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Z_L_XL 0x2C
+
+
+/**
+ * @brief Accelerometer data (MSB)
+ * \code
+ * Read
+ * \endcode
+ */
+#define LSM6DS3_XG_OUT_Z_H_XL 0x2D
+
+/******************************************************************************/
+/************* END ACCELEROMETER AND GYROSCOPE REGISTER MAPPING **************/
+/******************************************************************************/
+
+
+/************************************** COMMON REGISTERS VALUE *******************************************/
+
+/**
+* @brief Device Address
+*/
+#define LSM6DS3_ADDRESS_LOW 0xD4 // SAD[0] = 0
+#define LSM6DS3_ADDRESS_HIGH 0xD6 // SAD[0] = 1
+#define LSM6DS3_XG_MEMS_ADDRESS LSM6DS3_ADDRESS_LOW // SAD[0] = 0
+
+
+/**
+ * @brief Device Identifier. Default value of the WHO_AM_I register.
+ */
+#define I_AM_LSM6DS3_XG ((uint8_t)0x69)
+
+
+/**
+ * @brief Register address automatically incremented during a multiple byte
+ * access with a serial interface (I2C or SPI). Default value of the
+ * LSM6DS3_XG_CTRL3_C register.
+ */
+#define LSM6DS3_XG_IF_INC ((uint8_t)0x04)
+
+#define LSM6DS3_XG_IF_INC_MASK ((uint8_t)0x04)
+
+/** @defgroup LSM6DS3_XG_FIFO_Output_Data_Rate_Selection_FIFO_CTRL5 LSM6DS3_XG_FIFO_Output_Data_Rate_Selection_FIFO_CTRL5
+ * @{
+ */
+#define LSM6DS3_XG_FIFO_ODR_NA ((uint8_t)0x00) /*!< FIFO ODR NA */
+#define LSM6DS3_XG_FIFO_ODR_10HZ ((uint8_t)0x08) /*!< FIFO ODR 10Hz */
+#define LSM6DS3_XG_FIFO_ODR_25HZ ((uint8_t)0x10) /*!< FIFO ODR 25Hz */
+#define LSM6DS3_XG_FIFO_ODR_50HZ ((uint8_t)0x18) /*!< FIFO ODR 50Hz */
+#define LSM6DS3_XG_FIFO_ODR_100HZ ((uint8_t)0x20) /*!< FIFO ODR 100Hz */
+#define LSM6DS3_XG_FIFO_ODR_200HZ ((uint8_t)0x28) /*!< FIFO ODR 200Hz */
+#define LSM6DS3_XG_FIFO_ODR_400HZ ((uint8_t)0x30) /*!< FIFO ODR 400Hz */
+#define LSM6DS3_XG_FIFO_ODR_800HZ ((uint8_t)0x38) /*!< FIFO ODR 800Hz */
+#define LSM6DS3_XG_FIFO_ODR_1600HZ ((uint8_t)0x40) /*!< FIFO ODR 1600Hz */
+#define LSM6DS3_XG_FIFO_ODR_3300HZ ((uint8_t)0x48) /*!< FIFO ODR 3300Hz */
+#define LSM6DS3_XG_FIFO_ODR_6600HZ ((uint8_t)0x50) /*!< FIFO ODR 6600Hz */
+
+#define LSM6DS3_XG_FIFO_ODR_MASK ((uint8_t)0x78)
+/**
+ * @}
+ */
+
+/** @defgroup LSM6DS3_XG_FIFO_Mode_Selection_FIFO_CTRL5 LSM6DS3_XG_FIFO_Mode_Selection_FIFO_CTRL5
+ * @{
+ */
+#define LSM6DS3_XG_FIFO_MODE_BYPASS ((uint8_t)0x00) /*!< BYPASS Mode. FIFO turned off */
+#define LSM6DS3_XG_FIFO_MODE_FIFO ((uint8_t)0x01) /*!< FIFO Mode. Stop collecting data when FIFO is full */
+#define LSM6DS3_XG_FIFO_MODE_CONTINUOUS_THEN_FIFO ((uint8_t)0x03) /*!< CONTINUOUS mode until trigger is deasserted, then FIFO mode */
+#define LSM6DS3_XG_FIFO_MODE_BYPASS_THEN_CONTINUOUS ((uint8_t)0x04) /*!< BYPASS mode until trigger is deasserted, then CONTINUOUS mode */
+#define LSM6DS3_XG_FIFO_MODE_CONTINUOUS_OVERWRITE ((uint8_t)0x05) /*!< CONTINUOUS mode. If the FIFO is full the new sample overwrite the older one */
+
+#define LSM6DS3_XG_FIFO_MODE_MASK ((uint8_t)0x07)
+/**
+ * @}
+ */
+
+
+/************************************** GYROSCOPE REGISTERS VALUE *******************************************/
+
+
+/** @addtogroup LSM6DS3_XG_Gyroscope_Output_Data_Rate_Selection_CTRL_REG1_G LSM6DS3_XG_Gyroscope_Output_Data_Rate_Selection_CTRL_REG1_G
+ * @{
+ */
+#define LSM6DS3_G_ODR_PD ((uint8_t)0x00) /*!< Output Data Rate: Power-down*/
+#define LSM6DS3_G_ODR_13HZ ((uint8_t)0x10) /*!< Output Data Rate: 13 Hz*/
+#define LSM6DS3_G_ODR_26HZ ((uint8_t)0x20) /*!< Output Data Rate: 26 Hz*/
+#define LSM6DS3_G_ODR_52HZ ((uint8_t)0x30) /*!< Output Data Rate: 52 Hz */
+#define LSM6DS3_G_ODR_104HZ ((uint8_t)0x40) /*!< Output Data Rate: 104 Hz */
+#define LSM6DS3_G_ODR_208HZ ((uint8_t)0x50) /*!< Output Data Rate: 208 Hz */
+#define LSM6DS3_G_ODR_416HZ ((uint8_t)0x60) /*!< Output Data Rate: 416 Hz */
+#define LSM6DS3_G_ODR_833HZ ((uint8_t)0x70) /*!< Output Data Rate: 833 Hz */
+#define LSM6DS3_G_ODR_1660HZ ((uint8_t)0x80) /*!< Output Data Rate: 1.66 kHz */
+
+#define LSM6DS3_G_ODR_MASK ((uint8_t)0xF0)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Gyroscope_Full_Scale_Selection_CTRL2_G LSM6DS3_XG_Gyroscope_Full_Scale_Selection_CTRL2_G
+ * @{
+ */
+#define LSM6DS3_G_FS_125_DISABLE ((uint8_t)0x00) /*!< Full scale: 125 dps enable: disable */
+#define LSM6DS3_G_FS_125_ENABLE ((uint8_t)0x02) /*!< Full scale: 125 dps enable: enable */
+
+#define LSM6DS3_G_FS_125_MASK ((uint8_t)0x02)
+
+#define LSM6DS3_G_FS_245 ((uint8_t)0x00) /*!< Full scale: 245 dps*/
+#define LSM6DS3_G_FS_500 ((uint8_t)0x04) /*!< Full scale: 500 dps */
+#define LSM6DS3_G_FS_1000 ((uint8_t)0x08) /*!< Full scale: 1000 dps */
+#define LSM6DS3_G_FS_2000 ((uint8_t)0x0C) /*!< Full scale: 2000 dps */
+
+#define LSM6DS3_G_FS_MASK ((uint8_t)0x0C)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Gyroscope_Z_Axis_Output_Enable_Selection_CTRL10_C LSM6DS3_XG_Gyroscope_Z_Axis_Output_Enable_Selection_CTRL10_C
+ * @{
+ */
+#define LSM6DS3_G_ZEN_DISABLE ((uint8_t)0x00) /*!< Gyroscope�s Z-axis output enable: disable */
+#define LSM6DS3_G_ZEN_ENABLE ((uint8_t)0x20) /*!< Gyroscope�s Z-axis output enable: enable */
+
+#define LSM6DS3_G_ZEN_MASK ((uint8_t)0x20)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Gyroscope_Y_Axis_Output_Enable_Selection_CTRL10_C LSM6DS3_XG_Gyroscope_Y_Axis_Output_Enable_Selection_CTRL10_C
+ * @{
+ */
+#define LSM6DS3_G_YEN_DISABLE ((uint8_t)0x00) /*!< Gyroscope�s Y-axis output enable: disable */
+#define LSM6DS3_G_YEN_ENABLE ((uint8_t)0x10) /*!< Gyroscope�s Y-axis output enable: enable */
+
+#define LSM6DS3_G_YEN_MASK ((uint8_t)0x10)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Gyroscope_X_Axis_Output_Enable_Selection_CTRL10_C LSM6DS3_XG_Gyroscope_X_Axis_Output_Enable_Selection_CTRL10_C
+ * @{
+ */
+#define LSM6DS3_G_XEN_DISABLE ((uint8_t)0x00) /*!< Gyroscope�s X-axis output enable: disable */
+#define LSM6DS3_G_XEN_ENABLE ((uint8_t)0x08) /*!< Gyroscope�s X-axis output enable: enable */
+
+#define LSM6DS3_G_XEN_MASK ((uint8_t)0x08)
+
+/**
+ * @}
+ */
+
+
+/************************************ ACCELEROMETER REGISTERS VALUE *****************************************/
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_Output_Data_Rate_Selection_CTRL1_XL LSM6DS3_XG_Accelerometer_Output_Data_Rate_Selection_CTRL1_XL
+ * @{
+ */
+#define LSM6DS3_XL_ODR_PD ((uint8_t)0x00) /*!< Output Data Rate: Power-down*/
+#define LSM6DS3_XL_ODR_13HZ ((uint8_t)0x10) /*!< Output Data Rate: 13 Hz*/
+#define LSM6DS3_XL_ODR_26HZ ((uint8_t)0x20) /*!< Output Data Rate: 26 Hz*/
+#define LSM6DS3_XL_ODR_52HZ ((uint8_t)0x30) /*!< Output Data Rate: 52 Hz */
+#define LSM6DS3_XL_ODR_104HZ ((uint8_t)0x40) /*!< Output Data Rate: 104 Hz */
+#define LSM6DS3_XL_ODR_208HZ ((uint8_t)0x50) /*!< Output Data Rate: 208 Hz */
+#define LSM6DS3_XL_ODR_416HZ ((uint8_t)0x60) /*!< Output Data Rate: 416 Hz */
+#define LSM6DS3_XL_ODR_833HZ ((uint8_t)0x70) /*!< Output Data Rate: 833 Hz */
+#define LSM6DS3_XL_ODR_1660HZ ((uint8_t)0x80) /*!< Output Data Rate: 1.66 kHz */
+#define LSM6DS3_XL_ODR_3330HZ ((uint8_t)0x90) /*!< Output Data Rate: 3.33 kHz */
+#define LSM6DS3_XL_ODR_6660HZ ((uint8_t)0xA0) /*!< Output Data Rate: 6.66 kHz */
+
+#define LSM6DS3_XL_ODR_MASK ((uint8_t)0xF0)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_Full_Scale_Selection_CTRL1_XL LSM6DS3_XG_Accelerometer_Full_Scale_Selection_CTRL1_XL
+ * @{
+ */
+#define LSM6DS3_XL_FS_2G ((uint8_t)0x00) /*!< Full scale: +- 2g */
+#define LSM6DS3_XL_FS_4G ((uint8_t)0x08) /*!< Full scale: +- 4g */
+#define LSM6DS3_XL_FS_8G ((uint8_t)0x0C) /*!< Full scale: +- 8g */
+#define LSM6DS3_XL_FS_16G ((uint8_t)0x04) /*!< Full scale: +- 16g */
+
+#define LSM6DS3_XL_FS_MASK ((uint8_t)0x0C)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_Anti_Aliasing_Filter_Bandwidth_Selection_CTRL1_XL LSM6DS3_XG_Accelerometer_Anti_Aliasing_Filter_Bandwidth_Selection_CTRL1_XL
+ * @{
+ */
+#define LSM6DS3_XL_BW_400HZ ((uint8_t)0x00) /*!< Anti-aliasing filter bandwidht: 400 Hz */
+#define LSM6DS3_XL_BW_200HZ ((uint8_t)0x01) /*!< Anti-aliasing filter bandwidht: 200 Hz */
+#define LSM6DS3_XL_BW_100HZ ((uint8_t)0x02) /*!< Anti-aliasing filter bandwidht: 100 Hz */
+#define LSM6DS3_XL_BW_50HZ ((uint8_t)0x03) /*!< Anti-aliasing filter bandwidht: 50 Hz */
+
+#define LSM6DS3_XL_BW_MASK ((uint8_t)0x03)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_Z_Axis_Output_Enable_Selection_CTRL9_XL LSM6DS3_XG_Accelerometer_Z_Axis_Output_Enable_Selection_CTRL9_XL
+ * @{
+ */
+#define LSM6DS3_XL_ZEN_DISABLE ((uint8_t)0x00) /*!< Accelerometer�s Z-axis output enable: disable */
+#define LSM6DS3_XL_ZEN_ENABLE ((uint8_t)0x20) /*!< Accelerometer�s Z-axis output enable: enable */
+
+#define LSM6DS3_XL_ZEN_MASK ((uint8_t)0x20)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_Y_Axis_Output_Enable_Selection_CTRL9_XL LSM6DS3_XG_Accelerometer_Y_Axis_Output_Enable_Selection_CTRL9_XL
+ * @{
+ */
+#define LSM6DS3_XL_YEN_DISABLE ((uint8_t)0x00) /*!< Accelerometer�s Y-axis output enable: disable */
+#define LSM6DS3_XL_YEN_ENABLE ((uint8_t)0x10) /*!< Accelerometer�s Y-axis output enable: enable */
+
+#define LSM6DS3_XL_YEN_MASK ((uint8_t)0x10)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_X_Axis_Output_Enable_Selection_CTRL9_XL LSM6DS3_XG_Accelerometer_X_Axis_Output_Enable_Selection_CTRL9_XL
+ * @{
+ */
+#define LSM6DS3_XL_XEN_DISABLE ((uint8_t)0x00) /*!< Accelerometer�s X-axis output enable: disable */
+#define LSM6DS3_XL_XEN_ENABLE ((uint8_t)0x08) /*!< Accelerometer�s X-axis output enable: enable */
+
+#define LSM6DS3_XL_XEN_MASK ((uint8_t)0x08)
+
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_FF_DUR5_Selection_WAKE_UP_DUR LSM6DS3_XG_Accelerometer_FF_DUR5_Selection_WAKE_UP_DUR
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_DUR_FF_DUR5_DEFAULT ((uint8_t)0x00)
+
+#define LSM6DS3_XG_WAKE_UP_DUR_FF_DUR5_MASK ((uint8_t)0x80)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_WAKE_DUR_Selection_WAKE_UP_DUR LSM6DS3_XG_Accelerometer_WAKE_DUR_Selection_WAKE_UP_DUR
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_DUR_WAKE_DUR_DEFAULT ((uint8_t)0x00)
+
+#define LSM6DS3_XG_WAKE_UP_DUR_WAKE_DUR_MASK ((uint8_t)0x60)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_TIMER_HR_Selection_WAKE_UP_DUR LSM6DS3_XG_Accelerometer_TIMER_HR_Selection_WAKE_UP_DUR
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_DUR_TIMER_HR_DEFAULT ((uint8_t)0x00)
+
+#define LSM6DS3_XG_WAKE_UP_DUR_TIMER_HR_MASK ((uint8_t)0x10)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_SLEEP_DUR_Selection_WAKE_UP_DUR LSM6DS3_XG_Accelerometer_SLEEP_DUR_Selection_WAKE_UP_DUR
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_DUR_SLEEP_DUR_DEFAULT ((uint8_t)0x00)
+
+#define LSM6DS3_XG_WAKE_UP_DUR_SLEEP_DUR_MASK ((uint8_t)0x0F)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_FF_DUR_Selection_FREE_FALL LSM6DS3_XG_Accelerometer_FF_DUR_Selection_FREE_FALL
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_DUR_DEFAULT ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_DUR_TYPICAL ((uint8_t)0x30)
+
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_DUR_MASK ((uint8_t)0xF8)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_FF_THS_Selection_FREE_FALL LSM6DS3_XG_Accelerometer_FF_THS_Selection_FREE_FALL
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_156MG ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_219MG ((uint8_t)0x01)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_250MG ((uint8_t)0x02)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_312MG ((uint8_t)0x03)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_344MG ((uint8_t)0x04)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_406MG ((uint8_t)0x05)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_469MG ((uint8_t)0x06)
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_500MG ((uint8_t)0x07)
+
+#define LSM6DS3_XG_WAKE_FREE_FALL_FF_THS_MASK ((uint8_t)0x07)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_INACT_STATE_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_INACT_STATE_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_INACT_STATE_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_INACT_STATE_ENABLE ((uint8_t)0x80)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_INACT_STATE_MASK ((uint8_t)0x80)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_SINGLE_TAP_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_SINGLE_TAP_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_SINGLE_TAP_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_SINGLE_TAP_ENABLE ((uint8_t)0x40)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_SINGLE_TAP_MASK ((uint8_t)0x40)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_WU_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_WU_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_WU_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_WU_ENABLE ((uint8_t)0x20)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_WU_MASK ((uint8_t)0x20)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_FF_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_FF_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_FF_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_FF_ENABLE ((uint8_t)0x10)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_FF_MASK ((uint8_t)0x10)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_DOUBLE_TAP_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_DOUBLE_TAP_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_DOUBLE_TAP_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_DOUBLE_TAP_ENABLE ((uint8_t)0x08)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_DOUBLE_TAP_MASK ((uint8_t)0x08)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_6D_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_6D_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_6D_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_6D_ENABLE ((uint8_t)0x04)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_6D_MASK ((uint8_t)0x04)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_TILT_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_TILT_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_TILT_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_TILT_ENABLE ((uint8_t)0x02)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_TILT_MASK ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_INT1_TIMER_Selection_MD1_CFG LSM6DS3_XG_Accelerometer_INT1_TIMER_Selection_MD1_CFG
+ * @{
+ */
+#define LSM6DS3_XG_MD1_CFG_INT1_TIMER_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_MD1_CFG_INT1_TIMER_ENABLE ((uint8_t)0x01)
+
+#define LSM6DS3_XG_MD1_CFG_INT1_TIMER_MASK ((uint8_t)0x01)
+
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_FF_IA_Enable_WAKE_UP_SRC LSM6DS3_XG_Accelerometer_FF_IA_Enable_WAKE_UP_SRC
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_SRC_FF_IA_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_UP_SRC_FF_IA_ENABLE ((uint8_t)0x20)
+
+#define LSM6DS3_XG_WAKE_UP_SRC_FF_IA_MASK ((uint8_t)0x20)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_SLEEP_STATE_IA_Enable_WAKE_UP_SRC LSM6DS3_XG_Accelerometer_SLEEP_STATE_IA_Enable_WAKE_UP_SRC
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_SRC_SLEEP_STATE_IA_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_UP_SRC_SLEEP_STATE_IA_ENABLE ((uint8_t)0x10)
+
+#define LSM6DS3_XG_WAKE_UP_SRC_SLEEP_STATE_IA_MASK ((uint8_t)0x10)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_WU_IA_Enable_WAKE_UP_SRC LSM6DS3_XG_Accelerometer_WU_IA_Enable_WAKE_UP_SRC
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_SRC_WU_IA_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_UP_SRC_WU_IA_ENABLE ((uint8_t)0x08)
+
+#define LSM6DS3_XG_WAKE_UP_SRC_WU_IA_MASK ((uint8_t)0x08)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_X_WU_Enable_WAKE_UP_SRC LSM6DS3_XG_Accelerometer_X_WU_Enable_WAKE_UP_SRC
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_SRC_X_WU_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_UP_SRC_X_WU_ENABLE ((uint8_t)0x04)
+
+#define LSM6DS3_XG_WAKE_UP_SRC_X_WU_MASK ((uint8_t)0x04)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_Y_WU_Enable_WAKE_UP_SRC LSM6DS3_XG_Accelerometer_Y_WU_Enable_WAKE_UP_SRC
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_SRC_Y_WU_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_UP_SRC_Y_WU_ENABLE ((uint8_t)0x02)
+
+
+#define LSM6DS3_XG_WAKE_UP_SRC_Y_WU_MASK ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_XG_Accelerometer_Z_WU_Enable_WAKE_UP_SRC LSM6DS3_XG_Accelerometer_Z_WU_Enable_WAKE_UP_SRC
+ * @{
+ */
+#define LSM6DS3_XG_WAKE_UP_SRC_Z_WU_DISABLE ((uint8_t)0x00)
+#define LSM6DS3_XG_WAKE_UP_SRC_Z_WU_ENABLE ((uint8_t)0x01)
+
+#define LSM6DS3_XG_WAKE_UP_SRC_Z_WU_MASK ((uint8_t)0x01)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_Imported_Functions LSM6DS3_Imported_Functions
+ * @{
+ */
+
+/* Six axes sensor IO functions */
+extern IMU_6AXES_StatusTypeDef LSM6DS3_IO_Init( void );
+extern IMU_6AXES_StatusTypeDef LSM6DS3_IO_Write( uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr,
+ uint16_t NumByteToWrite );
+extern IMU_6AXES_StatusTypeDef LSM6DS3_IO_Read( uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr,
+ uint16_t NumByteToRead );
+extern void LSM6DS3_IO_ITConfig( void );
+
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_Exported_Types LSM6DS3_Exported_Types
+ * @{
+ */
+/**
+ * @brief LSM6DS3 driver extended internal structure definition
+ */
+typedef struct
+{
+ IMU_6AXES_StatusTypeDef (*Enable_Free_Fall_Detection) (void);
+ IMU_6AXES_StatusTypeDef (*Disable_Free_Fall_Detection) (void);
+ IMU_6AXES_StatusTypeDef (*Get_Status_Free_Fall_Detection) (uint8_t *);
+} LSM6DS3_DrvExtTypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup LSM6DS3_Exported_Variables LSM6DS3_Exported_Variables
+ * @{
+ */
+
+/* Six axes sensor driver structure */
+extern IMU_6AXES_DrvTypeDef LSM6DS3Drv;
+extern IMU_6AXES_DrvExtTypeDef LSM6DS3Drv_ext;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __LSM6DS3_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/