![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
test
Dependencies: GR-PEACH_video USBHost USBHost_custom
Fork of GR-PEACH_Camera_in by
main.cpp
- Committer:
- dkato
- Date:
- 2015-06-26
- Revision:
- 0:2f1caf4ce924
- Child:
- 1:aaa4b3e0f03c
File content as of revision 0:2f1caf4ce924:
#include "mbed.h" #include "DisplayBace.h" #include "USBHostMSD.h" #include "bitmap.h" #if defined(TARGET_RZ_A1H) #include "usb_host_setting.h" #else #define USB_HOST_CH 0 #endif #define VIDEO_CVBS (0) /* Analog Video Signal */ #define VIDEO_CMOS_CAMERA (1) /* Digital Video Signal */ #define VIDEO_YCBCR422 (0) #define VIDEO_RGB888 (1) #define VIDEO_RGB565 (2) /**** User Selection *********/ #define VIDEO_INPUT_METHOD (VIDEO_CVBS) /* Select VIDEO_CVBS or VIDEO_CMOS_CAMERA */ #define VIDEO_INPUT_FORMAT (VIDEO_RGB888) /* Select VIDEO_YCBCR422 or VIDEO_RGB888 or VIDEO_RGB565 */ #define USE_VIDEO_CH (0) /* Select 0 or 1 If selecting VIDEO_CMOS_CAMERA, should be 0.) */ #define VIDEO_PAL (0) /* Select 0(NTSC) or 1(PAL) If selecting VIDEO_CVBS, this parameter is not referenced.) */ /*****************************/ #if USE_VIDEO_CH == (0) #define VIDEO_INPUT_CH (DisplayBase::VIDEO_INPUT_CHANNEL_0) #define VIDEO_INT_TYPE (DisplayBase::INT_TYPE_S0_VFIELD) #else #define VIDEO_INPUT_CH (DisplayBase::VIDEO_INPUT_CHANNEL_1) #define VIDEO_INT_TYPE (DisplayBase::INT_TYPE_S1_VFIELD) #endif #if ( VIDEO_INPUT_FORMAT == VIDEO_YCBCR422 || VIDEO_INPUT_FORMAT == VIDEO_RGB565 ) #define DATA_SIZE_PER_PIC (2u) #else #define DATA_SIZE_PER_PIC (4u) #endif /*! Frame buffer stride: Frame buffer stride should be set to a multiple of 32 or 128 in accordance with the frame buffer burst transfer mode. */ #define PIXEL_HW (320u) /* QVGA */ #define PIXEL_VW (240u) /* QVGA */ #define VIDEO_BUFFER_STRIDE (((PIXEL_HW * DATA_SIZE_PER_PIC) + 31u) & ~31u) #define VIDEO_BUFFER_HEIGHT (PIXEL_VW) #if (USB_HOST_CH == 1) //Audio Camera Shield USB1 DigitalOut usb1en(P3_8); #endif DigitalOut led1(LED1); DigitalIn button(USER_BUTTON0); static uint8_t FrameBuffer_Video_A[VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT]__attribute((section("NC_BSS"),aligned(16))); //16 bytes aligned!; static uint8_t FrameBuffer_Video_B[VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT]__attribute((section("NC_BSS"),aligned(16))); //16 bytes aligned!; static volatile int32_t vsync_count; static volatile int32_t vfield_count; /**************************************************************************//** * @brief Interrupt callback function * @param[in] int_type : VDC5 interrupt type * @retval None ******************************************************************************/ static void IntCallbackFunc_Vfield(DisplayBase::int_type_t int_type) { if (vfield_count > 0) { vfield_count--; } } /**************************************************************************//** * @brief Wait for the specified number of times Vsync occurs * @param[in] wait_count : Wait count * @retval None ******************************************************************************/ static void WaitVfield(const int32_t wait_count) { vfield_count = wait_count; while (vfield_count > 0) { /* Do nothing */ } } /**************************************************************************//** * @brief Interrupt callback function for Vsync interruption * @param[in] int_type : VDC5 interrupt type * @retval None ******************************************************************************/ static void IntCallbackFunc_Vsync(DisplayBase::int_type_t int_type) { if (vsync_count > 0) { vsync_count--; } } /**************************************************************************//** * @brief Wait for the specified number of times Vsync occurs * @param[in] wait_count : Wait count * @retval None ******************************************************************************/ static void WaitVsync(const int32_t wait_count) { vsync_count = wait_count; while (vsync_count > 0) { /* Do nothing */ } } /**************************************************************************//** * @brief * @param[in] void * @retval None ******************************************************************************/ int main(void) { DisplayBase::graphics_error_t error; uint8_t * write_buff_addr = FrameBuffer_Video_A; uint8_t * save_buff_addr = FrameBuffer_Video_B; #if VIDEO_INPUT_METHOD == VIDEO_CMOS_CAMERA DisplayBase::video_ext_in_config_t ext_in_config; PinName cmos_camera_pin[11] = { /* data pin */ P2_7, P2_6, P2_5, P2_4, P2_3, P2_2, P2_1, P2_0, /* control pin */ P10_0, /* DV0_CLK */ P1_0, /* DV0_Vsync */ P1_1 /* DV0_Hsync */ }; #endif /* Create DisplayBase object */ DisplayBase Display; /* Graphics initialization process */ error = Display.Graphics_init(NULL); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } #if VIDEO_INPUT_METHOD == VIDEO_CVBS error = Display.Graphics_Video_init( DisplayBase::INPUT_SEL_VDEC, NULL); if( error != DisplayBase::GRAPHICS_OK ) { while(1); } #elif VIDEO_INPUT_METHOD == VIDEO_CMOS_CAMERA /* MT9V111 camera input config */ ext_in_config.inp_format = DisplayBase::VIDEO_EXTIN_FORMAT_BT601; /* BT601 8bit YCbCr format */ ext_in_config.inp_pxd_edge = DisplayBase::EDGE_RISING; /* Clock edge select for capturing data */ ext_in_config.inp_vs_edge = DisplayBase::EDGE_RISING; /* Clock edge select for capturing Vsync signals */ ext_in_config.inp_hs_edge = DisplayBase::EDGE_RISING; /* Clock edge select for capturing Hsync signals */ ext_in_config.inp_endian_on = DisplayBase::OFF; /* External input bit endian change on/off */ ext_in_config.inp_swap_on = DisplayBase::OFF; /* External input B/R signal swap on/off */ ext_in_config.inp_vs_inv = DisplayBase::SIG_POL_NOT_INVERTED; /* External input DV_VSYNC inversion control */ ext_in_config.inp_hs_inv = DisplayBase::SIG_POL_INVERTED; /* External input DV_HSYNC inversion control */ ext_in_config.inp_f525_625 = DisplayBase::EXTIN_LINE_525; /* Number of lines for BT.656 external input */ ext_in_config.inp_h_pos = DisplayBase::EXTIN_H_POS_CRYCBY; /* Y/Cb/Y/Cr data string start timing to Hsync reference */ ext_in_config.cap_vs_pos = 6; /* Capture start position from Vsync */ ext_in_config.cap_hs_pos = 150; /* Capture start position form Hsync */ ext_in_config.cap_width = 640; /* Capture width */ ext_in_config.cap_height = 468u; /* Capture height Max 468[line] Due to CMOS(MT9V111) output signal timing and VDC5 specification */ error = Display.Graphics_Video_init( DisplayBase::INPUT_SEL_EXT, &ext_in_config); if( error != DisplayBase::GRAPHICS_OK ) { printf("Line %d, error %d\n", __LINE__, error); while(1); } /* MT9V111 camera input port setting */ error = Display.Graphics_Dvinput_Port_Init(cmos_camera_pin, 11); if( error != DisplayBase::GRAPHICS_OK ) { printf("Line %d, error %d\n", __LINE__, error); while (1); } #endif /* Interrupt callback function setting (Vsync signal input to scaler 0) */ error = Display.Graphics_Irq_Handler_Set(DisplayBase::INT_TYPE_S0_VI_VSYNC, 0, IntCallbackFunc_Vsync); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } /* Video capture setting (progressive form fixed) */ error = Display.Video_Write_Setting( VIDEO_INPUT_CH, #if VIDEO_PAL == 0 DisplayBase::COL_SYS_NTSC_358, #else DisplayBase::COL_SYS_PAL_443, #endif write_buff_addr, VIDEO_BUFFER_STRIDE, #if VIDEO_INPUT_FORMAT == VIDEO_YCBCR422 DisplayBase::VIDEO_FORMAT_YCBCR422, DisplayBase::WR_RD_WRSWA_NON, #elif VIDEO_INPUT_FORMAT == VIDEO_RGB565 DisplayBase::VIDEO_FORMAT_RGB565, DisplayBase::WR_RD_WRSWA_32_16BIT, #else DisplayBase::VIDEO_FORMAT_RGB888, DisplayBase::WR_RD_WRSWA_32BIT, #endif PIXEL_VW, PIXEL_HW ); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } /* Interrupt callback function setting (Field end signal for recording function in scaler 0) */ error = Display.Graphics_Irq_Handler_Set(VIDEO_INT_TYPE, 0, IntCallbackFunc_Vfield); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } /* Video write process start */ error = Display.Video_Start (VIDEO_INPUT_CH); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } /* Video write process stop */ error = Display.Video_Stop (VIDEO_INPUT_CH); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } /* Video write process start */ error = Display.Video_Start (VIDEO_INPUT_CH); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } /* Wait vsync to update resister */ WaitVsync(1); /* Wait 2 Vfield(Top or bottom field) */ WaitVfield(2); #if (USB_HOST_CH == 1) //Audio Shield USB1 //Audio Shield USB1 enable usb1en = 1; //Outputs high level Thread::wait(5); usb1en = 0; //Outputs low level #endif USBHostMSD msd("usb"); char file_name[32]; int file_name_index = 0; int save_file_size; while (1) { /* button check */ if (button == 0) { led1 = 1; if (write_buff_addr == FrameBuffer_Video_A) { write_buff_addr = FrameBuffer_Video_B; save_buff_addr = FrameBuffer_Video_A; } else { write_buff_addr = FrameBuffer_Video_A; save_buff_addr = FrameBuffer_Video_B; } /* Change write buffer */ error = Display.Video_Write_Change( VIDEO_INPUT_CH, write_buff_addr, VIDEO_BUFFER_STRIDE); if (error != DisplayBase::GRAPHICS_OK) { printf("Line %d, error %d\n", __LINE__, error); while (1); } /* Wait 2 Vfield(Top or bottom field) */ WaitVfield(2); /* FrameBuffer_Video_AorB capture completed */ /* USB connect check */ while (!msd.connected()) { if (!msd.connect()) { Thread::wait(500); } else { break; } } /* Data save */ #if ( VIDEO_INPUT_FORMAT == VIDEO_YCBCR422 || VIDEO_INPUT_FORMAT == VIDEO_RGB565 ) /* Save ".bin" file */ sprintf(file_name, "/usb/video_%d.bin", file_name_index++); FILE * fp = fopen(file_name, "w"); save_file_size = fwrite(save_buff_addr, sizeof(char), (VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT), fp); fclose(fp); #else /* Save ".bmp" file */ sprintf(file_name, "/usb/video_%d.bmp", file_name_index++); bitmap bitmapfile; save_file_size = bitmapfile.Rgb888ToBmp(file_name, save_buff_addr, PIXEL_HW, PIXEL_VW); #endif printf("file name %s, file size %d\n", file_name, save_file_size); led1 = 0; } } }