Diff: main.cpp

Revision:

0:2f1caf4ce924

Child:

1:aaa4b3e0f03c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Jun 26 02:26:08 2015 +0000
@@ -0,0 +1,307 @@
+#include "mbed.h"
+#include "DisplayBace.h"
+#include "USBHostMSD.h"
+#include "bitmap.h"
+#if defined(TARGET_RZ_A1H)
+#include "usb_host_setting.h"
+#else
+#define USB_HOST_CH     0
+#endif
+
+#define VIDEO_CVBS             (0)                 /* Analog  Video Signal */
+#define VIDEO_CMOS_CAMERA      (1)                 /* Digital Video Signal */
+#define VIDEO_YCBCR422         (0)
+#define VIDEO_RGB888           (1)
+#define VIDEO_RGB565           (2)
+
+/**** User Selection *********/
+#define VIDEO_INPUT_METHOD     (VIDEO_CVBS)        /* Select  VIDEO_CVBS or VIDEO_CMOS_CAMERA                       */
+#define VIDEO_INPUT_FORMAT     (VIDEO_RGB888)      /* Select  VIDEO_YCBCR422 or VIDEO_RGB888 or VIDEO_RGB565        */
+#define USE_VIDEO_CH           (0)                 /* Select  0 or 1            If selecting VIDEO_CMOS_CAMERA, should be 0.)               */
+#define VIDEO_PAL              (0)                 /* Select  0(NTSC) or 1(PAL) If selecting VIDEO_CVBS, this parameter is not referenced.) */
+/*****************************/
+
+#if USE_VIDEO_CH == (0)
+#define VIDEO_INPUT_CH         (DisplayBase::VIDEO_INPUT_CHANNEL_0)
+#define VIDEO_INT_TYPE         (DisplayBase::INT_TYPE_S0_VFIELD)
+#else
+#define VIDEO_INPUT_CH         (DisplayBase::VIDEO_INPUT_CHANNEL_1)
+#define VIDEO_INT_TYPE         (DisplayBase::INT_TYPE_S1_VFIELD)
+#endif
+
+#if ( VIDEO_INPUT_FORMAT == VIDEO_YCBCR422 || VIDEO_INPUT_FORMAT == VIDEO_RGB565 )
+#define DATA_SIZE_PER_PIC      (2u)
+#else
+#define DATA_SIZE_PER_PIC      (4u)
+#endif
+
+/*! Frame buffer stride: Frame buffer stride should be set to a multiple of 32 or 128
+    in accordance with the frame buffer burst transfer mode. */
+#define PIXEL_HW               (320u)  /* QVGA */
+#define PIXEL_VW               (240u)  /* QVGA */
+#define VIDEO_BUFFER_STRIDE    (((PIXEL_HW * DATA_SIZE_PER_PIC) + 31u) & ~31u)
+#define VIDEO_BUFFER_HEIGHT    (PIXEL_VW)
+
+#if (USB_HOST_CH == 1) //Audio Camera Shield USB1
+DigitalOut usb1en(P3_8);
+#endif
+DigitalOut led1(LED1);
+DigitalIn  button(USER_BUTTON0);
+
+static uint8_t FrameBuffer_Video_A[VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT]__attribute((section("NC_BSS"),aligned(16)));  //16 bytes aligned!;
+static uint8_t FrameBuffer_Video_B[VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT]__attribute((section("NC_BSS"),aligned(16)));  //16 bytes aligned!;
+static volatile int32_t vsync_count;
+static volatile int32_t vfield_count;
+
+/**************************************************************************//**
+ * @brief       Interrupt callback function
+ * @param[in]   int_type    : VDC5 interrupt type
+ * @retval      None
+******************************************************************************/
+static void IntCallbackFunc_Vfield(DisplayBase::int_type_t int_type)
+{
+    if (vfield_count > 0) {
+        vfield_count--;
+    }
+}
+
+/**************************************************************************//**
+ * @brief       Wait for the specified number of times Vsync occurs
+ * @param[in]   wait_count          : Wait count
+ * @retval      None
+******************************************************************************/
+static void WaitVfield(const int32_t wait_count)
+{
+    vfield_count = wait_count;
+    while (vfield_count > 0) {
+        /* Do nothing */
+    }
+}
+
+/**************************************************************************//**
+ * @brief       Interrupt callback function for Vsync interruption
+ * @param[in]   int_type    : VDC5 interrupt type
+ * @retval      None
+******************************************************************************/
+static void IntCallbackFunc_Vsync(DisplayBase::int_type_t int_type)
+{
+    if (vsync_count > 0) {
+        vsync_count--;
+    }
+}
+
+/**************************************************************************//**
+ * @brief       Wait for the specified number of times Vsync occurs
+ * @param[in]   wait_count          : Wait count
+ * @retval      None
+******************************************************************************/
+static void WaitVsync(const int32_t wait_count)
+{
+    vsync_count = wait_count;
+    while (vsync_count > 0) {
+        /* Do nothing */
+    }
+}
+
+/**************************************************************************//**
+ * @brief
+ * @param[in]   void
+ * @retval      None
+******************************************************************************/
+int main(void)
+{
+    DisplayBase::graphics_error_t error;
+    uint8_t * write_buff_addr = FrameBuffer_Video_A;
+    uint8_t * save_buff_addr  = FrameBuffer_Video_B;
+
+#if VIDEO_INPUT_METHOD == VIDEO_CMOS_CAMERA
+    DisplayBase::video_ext_in_config_t ext_in_config;
+    PinName cmos_camera_pin[11] = {
+        /* data pin */
+        P2_7, P2_6, P2_5, P2_4, P2_3, P2_2, P2_1, P2_0,
+        /* control pin */
+        P10_0,      /* DV0_CLK   */
+        P1_0,       /* DV0_Vsync */
+        P1_1        /* DV0_Hsync */
+    };
+#endif
+
+    /* Create DisplayBase object */
+    DisplayBase Display;
+
+    /* Graphics initialization process */
+    error = Display.Graphics_init(NULL);
+    if (error != DisplayBase::GRAPHICS_OK) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+
+#if VIDEO_INPUT_METHOD == VIDEO_CVBS
+    error = Display.Graphics_Video_init( DisplayBase::INPUT_SEL_VDEC, NULL);
+    if( error != DisplayBase::GRAPHICS_OK ) {
+        while(1);
+    }
+
+#elif VIDEO_INPUT_METHOD == VIDEO_CMOS_CAMERA
+    /* MT9V111 camera input config */
+    ext_in_config.inp_format     = DisplayBase::VIDEO_EXTIN_FORMAT_BT601; /* BT601 8bit YCbCr format */
+    ext_in_config.inp_pxd_edge   = DisplayBase::EDGE_RISING;              /* Clock edge select for capturing data          */
+    ext_in_config.inp_vs_edge    = DisplayBase::EDGE_RISING;              /* Clock edge select for capturing Vsync signals */
+    ext_in_config.inp_hs_edge    = DisplayBase::EDGE_RISING;              /* Clock edge select for capturing Hsync signals */
+    ext_in_config.inp_endian_on  = DisplayBase::OFF;                      /* External input bit endian change on/off       */
+    ext_in_config.inp_swap_on    = DisplayBase::OFF;                      /* External input B/R signal swap on/off         */
+    ext_in_config.inp_vs_inv     = DisplayBase::SIG_POL_NOT_INVERTED;     /* External input DV_VSYNC inversion control     */
+    ext_in_config.inp_hs_inv     = DisplayBase::SIG_POL_INVERTED;         /* External input DV_HSYNC inversion control     */
+    ext_in_config.inp_f525_625   = DisplayBase::EXTIN_LINE_525;           /* Number of lines for BT.656 external input */
+    ext_in_config.inp_h_pos      = DisplayBase::EXTIN_H_POS_CRYCBY;       /* Y/Cb/Y/Cr data string start timing to Hsync reference */
+    ext_in_config.cap_vs_pos     = 6;                                     /* Capture start position from Vsync */
+    ext_in_config.cap_hs_pos     = 150;                                   /* Capture start position form Hsync */
+    ext_in_config.cap_width      = 640;                                   /* Capture width  */
+    ext_in_config.cap_height     = 468u;                                  /* Capture height Max 468[line]
+                                                                             Due to CMOS(MT9V111) output signal timing and VDC5 specification */
+    error = Display.Graphics_Video_init( DisplayBase::INPUT_SEL_EXT, &ext_in_config);
+    if( error != DisplayBase::GRAPHICS_OK ) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while(1);
+    }
+
+    /* MT9V111 camera input port setting */
+    error = Display.Graphics_Dvinput_Port_Init(cmos_camera_pin, 11);
+    if( error != DisplayBase::GRAPHICS_OK ) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+#endif
+
+    /* Interrupt callback function setting (Vsync signal input to scaler 0) */
+    error = Display.Graphics_Irq_Handler_Set(DisplayBase::INT_TYPE_S0_VI_VSYNC, 0, IntCallbackFunc_Vsync);
+    if (error != DisplayBase::GRAPHICS_OK) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+    /* Video capture setting (progressive form fixed) */
+    error = Display.Video_Write_Setting(
+                VIDEO_INPUT_CH,
+#if VIDEO_PAL == 0
+                DisplayBase::COL_SYS_NTSC_358,
+#else
+                DisplayBase::COL_SYS_PAL_443,
+#endif
+                write_buff_addr,
+                VIDEO_BUFFER_STRIDE,
+#if VIDEO_INPUT_FORMAT == VIDEO_YCBCR422
+                DisplayBase::VIDEO_FORMAT_YCBCR422,
+                DisplayBase::WR_RD_WRSWA_NON,
+#elif VIDEO_INPUT_FORMAT == VIDEO_RGB565
+                DisplayBase::VIDEO_FORMAT_RGB565,
+                DisplayBase::WR_RD_WRSWA_32_16BIT,
+#else
+                DisplayBase::VIDEO_FORMAT_RGB888,
+                DisplayBase::WR_RD_WRSWA_32BIT,
+#endif
+                PIXEL_VW,
+                PIXEL_HW
+            );
+    if (error != DisplayBase::GRAPHICS_OK) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+
+    /* Interrupt callback function setting (Field end signal for recording function in scaler 0) */
+    error = Display.Graphics_Irq_Handler_Set(VIDEO_INT_TYPE, 0, IntCallbackFunc_Vfield);
+    if (error != DisplayBase::GRAPHICS_OK) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+
+    /* Video write process start */
+    error = Display.Video_Start (VIDEO_INPUT_CH);
+    if (error != DisplayBase::GRAPHICS_OK) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+
+    /* Video write process stop */
+    error = Display.Video_Stop (VIDEO_INPUT_CH);
+    if (error != DisplayBase::GRAPHICS_OK) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+
+    /* Video write process start */
+    error = Display.Video_Start (VIDEO_INPUT_CH);
+    if (error != DisplayBase::GRAPHICS_OK) {
+        printf("Line %d, error %d\n", __LINE__, error);
+        while (1);
+    }
+
+    /* Wait vsync to update resister */
+    WaitVsync(1);
+
+    /* Wait 2 Vfield(Top or bottom field) */
+    WaitVfield(2);
+
+#if (USB_HOST_CH == 1) //Audio Shield USB1
+    //Audio Shield USB1 enable
+    usb1en = 1;        //Outputs high level
+    Thread::wait(5);
+    usb1en = 0;        //Outputs low level
+#endif
+    USBHostMSD msd("usb");
+    char file_name[32];
+    int file_name_index = 0;
+    int save_file_size;
+
+    while (1) {
+        /* button check */
+        if (button == 0) {
+            led1 = 1;
+            if (write_buff_addr == FrameBuffer_Video_A) {
+                write_buff_addr = FrameBuffer_Video_B;
+                save_buff_addr  = FrameBuffer_Video_A;
+            } else {
+                write_buff_addr = FrameBuffer_Video_A;
+                save_buff_addr  = FrameBuffer_Video_B;
+            }
+
+            /* Change write buffer */
+            error = Display.Video_Write_Change(
+                        VIDEO_INPUT_CH,
+                        write_buff_addr,
+                        VIDEO_BUFFER_STRIDE);
+            if (error != DisplayBase::GRAPHICS_OK) {
+                printf("Line %d, error %d\n", __LINE__, error);
+                while (1);
+            }
+            /* Wait 2 Vfield(Top or bottom field) */
+            WaitVfield(2);
+
+            /* FrameBuffer_Video_AorB capture completed */
+            /* USB connect check */
+            while (!msd.connected()) {
+                if (!msd.connect()) {
+                    Thread::wait(500);
+                } else {
+                    break;
+                }
+            }
+
+            /* Data save */
+#if ( VIDEO_INPUT_FORMAT == VIDEO_YCBCR422 || VIDEO_INPUT_FORMAT == VIDEO_RGB565 )
+            /* Save ".bin" file */
+            sprintf(file_name, "/usb/video_%d.bin", file_name_index++);
+            FILE * fp = fopen(file_name, "w");
+            save_file_size = fwrite(save_buff_addr, sizeof(char), (VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT), fp);
+            fclose(fp);
+#else
+            /* Save ".bmp" file */
+            sprintf(file_name, "/usb/video_%d.bmp", file_name_index++);
+
+            bitmap bitmapfile;
+            save_file_size = bitmapfile.Rgb888ToBmp(file_name, save_buff_addr, PIXEL_HW, PIXEL_VW);
+#endif
+            printf("file name %s, file size %d\n", file_name, save_file_size);
+            led1 = 0;
+        }
+    }
+}