How to use EEPROM in TG-LPC11U35-501

Dependencies:   AQM0802 EEPROM mbed

Revision:
1:b72b39a47d1a
Parent:
0:8dfee9f6df54
diff -r 8dfee9f6df54 -r b72b39a47d1a EEPROM.h
--- a/EEPROM.h	Sun Jun 22 09:57:23 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,67 +0,0 @@
-//**********************
-// EEPROM.h for TG-LPC11U35-501
-//
-// (C)Copyright 2014 All rights reserved by Y.Onodera
-// http://einstlab.web.fc2.com
-//**********************
-
-#ifndef __ROMAPI_11U35_H_
-#define __ROMAPI_11U35_H_
-
-#include "mbed.h"
-
-typedef enum {
-    CMD_SUCCESS = 0,            // Command is executed successfully.
-    INVALID_COMMAND = 1,        // Invalid command.
-    SRC_ADDR_ERROR = 2,         // Source address is not on a word boundary.
-    DST_ADDR_ERROR = 3,         // Destination address is not on a correct boundary.
-    SRC_ADDR_NOT_MAPPED = 4,    // Source address is not mapped in the memory map.
-    DST_ADDR_NOT_MAPPED = 5,    // Destination address is not mapped in the memory map. 
-    COUNT_ERROR = 6,            // Byte count is not multiple of 4 or is not a permitted value.
-    INVALID_SECTOR = 7,         // Sector number is invalid.
-    SECTOR_NOT_BLANK = 8,       // Sector is not blank.
-    SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION = 9,    // Command to prepare sector for write operation was not executed.
-    COMPARE_ERROR =10,          // Source and destination data is not same.
-    BUSY = 11                   // flash programming hardware interface is busy.
-} IAPstatus;
-
-
-typedef enum {
-    Prepare_sector = 50,
-    Copy_RAM_flash = 51,
-    Erase_sector = 52,
-    Blank_check_sector = 53,
-    Read_Part_ID = 54,
-    Read_Boot_version = 55,
-    Compare = 56,
-    Reinvoke_ISP = 57,
-    Read_UID = 58,
-    Erase_page = 59,
-    EEPROM_Write = 61,
-    EEPROM_Read = 62
-} IAPcommand;
-
-
-#define IAP_LOCATION (0x1FFF1FF1UL)
-typedef void (*IAP)(unsigned int[], unsigned int[]);
-
-
-class EEPROM {
-public:
-    EEPROM() : iap_entry( reinterpret_cast<IAP>(IAP_LOCATION) ), cclk_kHz( SystemCoreClock / 1000 ) {}
-
-    int write( unsigned int EEPROM_addr, char *RAM_addr, unsigned int n );
-    int read( unsigned int EEPROM_addr, char *RAM_addr, unsigned int n );
-    int put( unsigned int EEPROM_addr, char data );
-    char get( unsigned int EEPROM_addr );
- 
-private:
-    IAP             iap_entry;
-    unsigned int    command[5];
-    unsigned int    status[4];
-    char            dat[1];
-    int             cclk_kHz;
-};
-
-
-#endif /* __ROMAPI_11U35_H_ */