Diff: LM005A/LM005A.h

Revision:

1:0cad46274201

Parent:

0:5b5a1b5f1ae4

--- a/LM005A/LM005A.h	Thu Apr 19 13:15:25 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,161 +0,0 @@
-/* LM005AInterface Example
- * Copyright (c) 2015 MAXIUM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef LM005A_H
-#define LM005A_H
-
-#include "ATCmdParser.h"
-
-/** LM005AInterface class.
-    This is an interface to a LM005A radio.
- */
-class LM005A
-{
-public:
-    LM005A(PinName tx, PinName rx, bool debug=false);
-    bool init(void);
-    /**
-    * Check firmware version of LM005A
-    *
-    * @return    firmware version string
-    */
-    const char * get_firmware_version(void);
-    
-    /**
-    * 设置终端入网激活模式
-    *
-    * @param mode 终端入网激活模式 0-OTA, 1-ABP
-    * @return true only if LM005A was setup correctly
-    */
-    int set_mode(int mode);
-    /**
-    * 设置终端CLASS模式
-    *
-    * @param class_mode 终端入网CLASS模式 0-OTA, 1-ABP
-    * @return true only if LM005A was setup correctly
-    */
-   int set_band(int gap,int band);
- /**
-    * 设置终端CLASS模式
-    *
-    * @param class_mode 终端入网CLASS模式 0-OTA, 1-ABP
-    * @return true only if LM005A was setup correctly
-    */
-   int set_class(int class_mode);
-     /**
-    * 设置终端发射功率
-    *
-    * @param power 终端终端发射功率 (20,17,16,14,12,10,7,5,2) In DB
-    * @return   true
-    */
-int    set_power(int power);
-    /**
-    * Get EUI
-    *  @param type 0 deveui 1 appeui
-    * @return null-teriminated EUI or null if no IP address is assigned
-    */
-    const char *getEUI(int type); 
-    
-      /**
-    * Get device address
-    *   eui
-    * @return null-teriminated Device address or null if no IP address is assigned
-    */
-    const char *getDeviceAddress(void); 
-    /**
-    * Reset LM005A
-    *
-    * @return true only if LM005A resets successfully
-    */
-    
-    bool reset(void);
- 
-    /**
-    * jion LM005A to Network
-    *
-    * @param ap the name of the AP
-    * @param passPhrase the password of AP
-    * @return NSAPI_ERROR_OK only if LM005A is connected successfully
-    */
-    bool join();    
-
-    /**
-    * Send data 
-    *
-    * @param port 端口 ack 重发标志
-    * @param data data to be sent
-    * @param amount amount of data to be sent - max 1024
-    * @return true only if data sent successfully
-    */
- bool send(int port,int ack, const void *data, uint32_t amount);
-  /**
-    * Send data hex 
-    *
-    * @param port 端口 ack 重发标志
-    * @param data data to be sent
-    * @param amount amount of data to be sent in hex
-    * @return true only if data sent successfully
-    */
- bool sendhex(int port,int ack, const void *data, uint32_t amount);
-    /**
-    * Receives data from an open socket
-    *
-    * @param id id to receive from
-    * @param data placeholder for returned information
-    * @param amount number of bytes to be received
-    * @return the number of bytes received
-    */
-    int32_t recv(int id, void *data, uint32_t amount);
-
-    /**
-    * Allows timeout to be changed between commands
-    *
-    * @param timeout_ms timeout of the connection
-    */
-    void setTimeout(uint32_t timeout_ms);
-
-
-    /**
-    * Attach a function to call whenever network state has changed
-    *
-    * @param func A pointer to a void function, or 0 to set as none
-    */
-    void attach(Callback<void()> func);
-
-    /**
-    * Attach a function to call whenever network state has changed
-    *
-    * @param obj pointer to the object to call the member function on
-    * @param method pointer to the member function to call
-    */
-    template <typename T, typename M>
-    void attach(T *obj, M method) {
-        attach(Callback<void()>(obj, method));
-    }
-
-private:
-    UARTSerial _serial;
-    ATCmdParser _parser;
-     char buffer[256];
-     char rBuffer[256];
-     int rIndex;
-     int rCounter;
-    int _connect_error;
-    bool _fail;
-    void _packet_handler();
-};
-
-#endif