Diff: LM005A/LM005A.h

Revision:

0:5b5a1b5f1ae4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LM005A/LM005A.h	Thu Apr 19 13:15:25 2018 +0000
@@ -0,0 +1,161 @@
+/* LM005AInterface Example
+ * Copyright (c) 2015 MAXIUM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef LM005A_H
+#define LM005A_H
+
+#include "ATCmdParser.h"
+
+/** LM005AInterface class.
+    This is an interface to a LM005A radio.
+ */
+class LM005A
+{
+public:
+    LM005A(PinName tx, PinName rx, bool debug=false);
+    bool init(void);
+    /**
+    * Check firmware version of LM005A
+    *
+    * @return    firmware version string
+    */
+    const char * get_firmware_version(void);
+    
+    /**
+    * 设置终端入网激活模式
+    *
+    * @param mode 终端入网激活模式 0-OTA, 1-ABP
+    * @return true only if LM005A was setup correctly
+    */
+    int set_mode(int mode);
+    /**
+    * 设置终端CLASS模式
+    *
+    * @param class_mode 终端入网CLASS模式 0-OTA, 1-ABP
+    * @return true only if LM005A was setup correctly
+    */
+   int set_band(int gap,int band);
+ /**
+    * 设置终端CLASS模式
+    *
+    * @param class_mode 终端入网CLASS模式 0-OTA, 1-ABP
+    * @return true only if LM005A was setup correctly
+    */
+   int set_class(int class_mode);
+     /**
+    * 设置终端发射功率
+    *
+    * @param power 终端终端发射功率 (20,17,16,14,12,10,7,5,2) In DB
+    * @return   true
+    */
+int    set_power(int power);
+    /**
+    * Get EUI
+    *  @param type 0 deveui 1 appeui
+    * @return null-teriminated EUI or null if no IP address is assigned
+    */
+    const char *getEUI(int type); 
+    
+      /**
+    * Get device address
+    *   eui
+    * @return null-teriminated Device address or null if no IP address is assigned
+    */
+    const char *getDeviceAddress(void); 
+    /**
+    * Reset LM005A
+    *
+    * @return true only if LM005A resets successfully
+    */
+    
+    bool reset(void);
+ 
+    /**
+    * jion LM005A to Network
+    *
+    * @param ap the name of the AP
+    * @param passPhrase the password of AP
+    * @return NSAPI_ERROR_OK only if LM005A is connected successfully
+    */
+    bool join();    
+
+    /**
+    * Send data 
+    *
+    * @param port 端口 ack 重发标志
+    * @param data data to be sent
+    * @param amount amount of data to be sent - max 1024
+    * @return true only if data sent successfully
+    */
+ bool send(int port,int ack, const void *data, uint32_t amount);
+  /**
+    * Send data hex 
+    *
+    * @param port 端口 ack 重发标志
+    * @param data data to be sent
+    * @param amount amount of data to be sent in hex
+    * @return true only if data sent successfully
+    */
+ bool sendhex(int port,int ack, const void *data, uint32_t amount);
+    /**
+    * Receives data from an open socket
+    *
+    * @param id id to receive from
+    * @param data placeholder for returned information
+    * @param amount number of bytes to be received
+    * @return the number of bytes received
+    */
+    int32_t recv(int id, void *data, uint32_t amount);
+
+    /**
+    * Allows timeout to be changed between commands
+    *
+    * @param timeout_ms timeout of the connection
+    */
+    void setTimeout(uint32_t timeout_ms);
+
+
+    /**
+    * Attach a function to call whenever network state has changed
+    *
+    * @param func A pointer to a void function, or 0 to set as none
+    */
+    void attach(Callback<void()> func);
+
+    /**
+    * Attach a function to call whenever network state has changed
+    *
+    * @param obj pointer to the object to call the member function on
+    * @param method pointer to the member function to call
+    */
+    template <typename T, typename M>
+    void attach(T *obj, M method) {
+        attach(Callback<void()>(obj, method));
+    }
+
+private:
+    UARTSerial _serial;
+    ATCmdParser _parser;
+     char buffer[256];
+     char rBuffer[256];
+     int rIndex;
+     int rCounter;
+    int _connect_error;
+    bool _fail;
+    void _packet_handler();
+};
+
+#endif